@article {604, title = {Numerical insight into the micromechanics of jet erosion of a cohesive granular material}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 15017}, abstract = {

Here we investigate the physical mechanisms behind the surface erosion of a cohesive granular soil induced by an impinging jet by means of numerical simulations coupling fluid and grains at the microscale. The 2D numerical model combines the Discrete Element and Lattice Boltzmann methods (DEM-LBM) and accounts for the granular cohesion with a contact model featuring a paraboloidal yield surface. Here we review first the hydrodynamical conditions imposed by the fluid jet on a solid granular packing, turning then the attention to the impact of cohesion on the erosion kinetics. Finally, the use of an additional subcritical debonding damage model based on the work of Silvani and co-workers provides a novel insight into the internal solicitation of the cohesive granular sample by the impinging jet.

}, doi = {10.1051/epjconf/201714015017}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714015017}, author = {Cuellar, Pablo and Benseghier, Zeyd and Luu, Li-Hua and St{\'e}phane Bonelli and Jean-Yves Delenne and Farhang Radja{\"\i} and Pierre Philippe}, editor = {Saeid Nezamabadi and Luding, S.} } @proceedings {358, title = {Micromechanical analysis of the surface erosion of a cohesive soil by means of a coupled LBM-DEM model}, journal = {IV International Conference on Particle-based Methods (PARTICLES 2015)}, volume = {PARTICLE-BASED METHODS IV-FUNDAMENTALS AND APPLICATIONS}, year = {2015}, month = {sept-30-2015}, pages = {519-528}, publisher = {International Center for Numerical Methods in Engineering (CIMNE)}, address = {SEP 28-30 2015 Barcelona, SPAIN}, abstract = {

The elementary mechanisms driving the ubiquitous surface erosion of cohesive geomaterials can be analysed from a micromechanical perspective combining well-known numerical techniques. Here, a coupled model combining the Discrete Element and Lattice Boltzmann methods (DEM-LBM) provides an insight into the solid-fluid interaction during the transient erosion caused by a vertical fluid jet impinging on the surface of a granular assembly. The brittle cementation providing cohesion between the solid grains is described here by means of a simple bond model with a single-parameter yield surface. The initial topology of the surface erosion tends to mimic the profile of fluid velocity directly above the soil surface. We find that both the rate of erosion and the magnitude of eroded mass depend directly on the micromechanical strength of the single solid bonds.

}, keywords = {Cohesion, DEM, LBM, Surface erosion}, url = {https://hal.archives-ouvertes.fr/hal-01269324}, author = {Cuellar, Pablo and Pierre Philippe and St{\'e}phane Bonelli and Benahmed, Nadia and Brunier-Coulin, Florian and Jeff Ngoma and Jean-Yves Delenne and Farhang Radja{\"\i}}, editor = {Onate, E and Bischoff, M and Owen, DRJ} } @proceedings {359, title = {Transient regime to fluidized chimney within a granular bed by means of a 2D DEM/LBM modeling}, journal = {IV International Conference on Particle-based Methods (PARTICLES 2015)}, volume = {PARTICLE-BASED METHODS IV-FUNDAMENTALS AND APPLICATIONS}, year = {2015}, month = {sept-30-2015}, pages = {558-566}, publisher = {International Center for Numerical Methods in Engineering (CIMNE)}, address = {SEP 28-30 2015 Barcelona, SPAIN}, abstract = {

Beyond a given threshold, an upward fluid flow at constant flowrate, injected through a small size section, is able to generate a fluidization along a vertical chimney over the entire height of a granular assembly. Fluidization is first initiated in the immediate vicinity of the injection hole and then the fluidized zone grows gradually until reaching the upper surface of the granular packing. In this work, we present numerical results on the kinetics of chimney fluidization in an immersed granular bed produced with two-dimensional simulations coupling the Discrete Element and Lattice Boltzmann Methods (DEM-LBM). A parametric study is carried out with 11 different sets of physical parameters and analyzed based on spatio-temporal diagrams. Then a dimensional analysis allows finding general scaling laws for both threshold and growth rate of the fluidized zone by use of two dimensionless numbers, namely Reynolds and Archimedes numbers, while quite simple empirical relationships can also be proposed.

}, keywords = {DEM, Fluidization, Granular Materials, LBM}, url = {https://hal.archives-ouvertes.fr/hal-01269325}, author = {Jeff Ngoma and Pierre Philippe and St{\'e}phane Bonelli and Cuellar, Pablo and Jean-Yves Delenne and Farhang Radja{\"\i}}, editor = {Onate, E and Bischoff, M and Owen, DRJ} }