@book {635, title = {ACS Symposium SeriesGels and Other Soft Amorphous Solids Heterogeneity in Cement Hydrates}, volume = {1296}, year = {2018}, pages = {357-371}, publisher = {American Chemical Society}, organization = {American Chemical Society}, address = {Washington, DC}, abstract = {

Cement hydrates named C-S-H are the main products of the reaction of cement with water. The C-S-H phase is the most important phase of cement paste as it glues all other phases together in a solid rock-like material. C-S-H gels form and densify via out-of-equilibrium precipitation and aggregation of nano-grains during cement hydration. In this chapter, the link between the making and densification of C-S-H gels and amorphous solids is discussed by coarse-grained models based on the evolution of interaction potentials and an out-of-equilibrium simulation approach for particle precipitation. In particular, we characterize and correlate mesoscale structural and mechanical heterogeneities resulting into residual local eigenstresses. This underlying microscopic picture explains recent macroscopic measurements of the volume change of hydrating cement in fully saturated conditions.

}, isbn = {0-8412-3316-0}, issn = {0097-6156}, doi = {10.1021/symposium10.1021/bk-2018-129610.1021/bk-2018-1296.ch018}, url = {http://pubs.acs.org/series/symposiumhttp://pubs.acs.org/doi/book/10.1021/bk-2018-1296}, author = {Katerina Ioannidou}, editor = {Horkay, Ferenc and Douglas, Jack F. and Emanuela Del Gado} } @article {579, title = {Computing the linear viscoelastic properties of soft gels using an optimally windowed chirp protocol}, journal = {Journal of Rheology}, volume = {62}, year = {2018}, month = {Jul-2018}, pages = {1037 - 1050}, abstract = {

We use molecular dynamics simulations to investigate the linear viscoelastic response of a model three-dimensional particulate gel. The numerical simulations are combined with a novel test protocol (the optimally windowed chirp or OWCh), in which a continuous exponentially varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that (i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and (ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous damping and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By developing a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path toward novel multiscale insight into the rheological response for such complex materials. (C) 2018 The Society of Rheology.

}, issn = {0148-6055}, doi = {10.1122/1.5018715}, url = {http://sor.scitation.org/doi/10.1122/1.5018715}, author = {Bouzid, Mehdi and Keshavarz, Bavand and Geri, Michela and Divoux, Thibaut and Emanuela Del Gado and McKinley, Gareth H.} } @article {245, title = {Inhomogeneity in Cement Hydrates: Linking Local Packing to Local Pressure}, journal = {Journal of Nanomechanics and Micromechanics}, volume = {7}, year = {2017}, month = {Mar-03-2017}, pages = {Article Number: UNSP 04017003}, abstract = {

Nanoscale structural heterogeneities were recently revealed in computational and experimental studies of calcium silicate hydrates in hardened cement pastes. In this work their consequences for the mechanics are analyzed by computing local pressures in model samples at different overall densities, corresponding to different initial water-to-cement ratios. The correlations between pore size distributions, local density, local cohesive energy, and local pressure clearly show how in these materials structural heterogeneities may be the origin of significant mechanical heterogeneities. The results indicate that even at high density pressure, heterogeneities develop during the densification of cement hydrates and result in the coexistence of regions of high positive pressure with regions of negative pressure, in spite of the overall mechanical stability of the samples. Furthermore, the regions of negative pressure, prone to mechanical instabilities and local plastic processes, tend to be localized close to the surface of large mesopores and hence to be more significant at higher initial water content.
Inhomogeneity in Cement Hydrates: Linking Local Packing to Local Pressure. Available from: https://www.researchgate.net/publication/314222493_Inhomogeneity_in_Cement_Hydrates_Linking_Local_Packing_to_Local_Pressure [accessed Oct 2, 2017].

}, issn = {2153-5434}, doi = {10.1061/(ASCE)NM.2153-5477.0000120}, author = {Katerina Ioannidou and Emanuela Del Gado and Franz-Josef Ulm and Roland Jean-Marc Pellenq} } @article {623, title = {Nano-granular texture of cement hydrates}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 15027}, abstract = {

Mechanical behavior of concrete crucially depends on cement hydrates, the \“glue\” of cement. The design of high performance and more environmentally friendly cements demands a deeper understanding of the formation of the multiscale structure of cement hydrates, when they precipitate and densify. We investigate the precipitation and setting of nano-grains of cement hydrates using a combination of Monte Carlo and Molecular Dynamics numerical simulations and study their texture from nano up to the micron scale. We characterize the texture of cement hydrates using the local volume fraction distribution, the pore size distribution, the scattering intensity and the chord length distribution and we compare them with experiments. Our nano-granular model provides cement structure with realistic texture and mechanics and can be further used to investigate degradation mechanisms.

}, doi = {10.1051/epjconf/201714015027}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714015027}, author = {Katerina Ioannidou and Franz-Josef Ulm and Pierre E. Levitz and Emanuela Del Gado and Roland Jean-Marc Pellenq}, editor = {Farhang Radja{\"\i} and Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {621, title = {The crucial effect of early-stage gelation on the mechanical properties of cement hydrates}, journal = {Nature Communications}, volume = {7}, year = {2016}, month = {Jul-15-2016}, pages = {Article number 12106}, abstract = {

Gelation and densification of calcium\–silicate\–hydrate take place during cement hydration. Both processes are crucial for the development of cement strength, and for the long-term evolution of concrete structures. However, the physicochemical environment evolves during cement formation, making it difficult to disentangle what factors are crucial for the mechanical properties. Here we use Monte Carlo and Molecular Dynamics simulations to study a coarse-grained model of cement formation, and investigate the equilibrium and arrested states. We can correlate the various structures with the time evolution of the interactions between the nano-hydrates during the preparation of cement. The novel emerging picture is that the changes of the physicochemical environment, which dictate the evolution of the effective interactions, specifically favour the early gel formation and its continuous densification. Our observations help us understand how cement attains its unique strength and may help in the rational design of the properties of cement and related materials.

}, doi = {10.1038/ncomms12106}, url = {http://www.nature.com/articles/ncomms12106}, author = {Katerina Ioannidou and Matej, Kandu{\v c} and Li, Lunna and Frenkel, Daan and Dobnikar, Jure and Emanuela Del Gado} } @article {196, title = {Mesoscale texture of cement hydrates}, journal = {Proceedings of the National Academy of Sciences}, volume = {113}, year = {2016}, month = {Feb-23-2016}, pages = {2029 - 2034}, abstract = {

Strength and other mechanical properties of cement and concrete rely upon the formation of calcium\–silicate\–hydrates (C\–S\–H) during cement hydration. Controlling structure and properties of the C\–S\–H phase is a challenge, due to the complexity of this hydration product and of the mechanisms that drive its precipitation from the ionic solution upon dissolution of cement grains in water. Departing from traditional models mostly focused on length scales above the micrometer, recent research addressed the molecular structure of C\–S\–H. However, small-angle neutron scattering, electron-microscopy imaging, and nanoindentation experiments suggest that its mesoscale organization, extending over hundreds of nanometers, may be more important. Here we unveil the C\–S\–H mesoscale texture, a crucial step to connect the fundamental scales to the macroscale of engineering properties. We use simulations that combine information of the nanoscale building units of C\–S\–H and their effective interactions, obtained from atomistic simulations and experiments, into a statistical physics framework for aggregating nanoparticles. We compute small-angle scattering intensities, pore size distributions, specific surface area, local densities, indentation modulus, and hardness of the material, providing quantitative understanding of different experimental investigations. Our results provide insight into how the heterogeneities developed during the early stages of hydration persist in the structure of C\–S\–H and impact the mechanical performance of the hardened cement paste. Unraveling such links in cement hydrates can be groundbreaking and controlling them can be the key to smarter mix designs of cementitious materials.

Fig. 1.

}, issn = {0027-8424}, doi = {10.1073/pnas.1520487113}, author = {Katerina Ioannidou and Konrad J. Krakowiak and Mathieu Bauchy and Christian G. Hoover and Enrico Masoero and Sidney Yip and Franz-Josef Ulm and Pierre E. Levitz and Roland Jean-Marc Pellenq and Emanuela Del Gado} } @proceedings {331, title = {C-S-H across Length Scales: From Nano to Micron}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES }, year = {2015}, month = {Sep-17-2015}, pages = {39-48}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

Despite their impact on longevity, serviceability, and environmental footprint of our built infrastructure, the chemo-physical origins of nanoscale properties of cementitious materials, and their link to macroscale properties still remain rather obscure. Here, we discuss a multi-scale approach that describes different aspects of physical properties of C-S-H at the nano- and meso-scales. These include dynamics of water, thermal properties and mechanical behavior of C-S-H and its effect on properties of cement paste at different scales.

}, doi = {10.1061/978078447934610.1061/9780784479346.006}, url = {http://ascelibrary.org/doi/book/10.1061/9780784479346http://ascelibrary.org/doi/pdf/10.1061/9780784479346http://ascelibrary.org/doi/10.1061/9780784479346.006http://ascelibrary.org/doi/pdf/10.1061/9780784479346.006}, author = {Mohammad Javad Abdolhosseini Qomi and Enrico Masoero and Mathieu Bauchy and Franz-Josef Ulm and Emanuela Del Gado and Roland Jean-Marc Pellenq}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {335, title = {Hydration Kinetics and Gel Morphology of C-S-H}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {565-573}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

Calcium-silicate hydrate (C-S-H) is the main binder in cement and concrete. It starts forming from the early stages of cement hydration and it progressively densifies as cement sets. C-S-H nanoscale building blocks form a cohesive gel, whose structure and mechanics are still poorly understood, in spite of its practical importance. Here we review a statistical physics approach recently developed, which allows us to investigate the C-S-H gel formation under the out-of-equilibrium conditions typical of cement hydration. Our approach is based on colloidal particles, precipitating in the pore solution and interacting with effective forces associated to the ionic environment. We present the evolution of the space filling of C-S-H with different particle interactions and compare them with experimental data at different lime concentrations. Moreover, we discuss the structural features of C-S-H in the mesoscale in terms of the scattering intensity. The comparison of our early stage C-S-H structures with small angle neutron scattering (SANS) experiments shows that long range spatial correlations and structural heterogeneties that develop in that early stages of hydration persist also in the hardened paste.

}, doi = {10.1061/978078447934610.1061/9780784479346.069}, author = {Katerina Ioannidou and Enrico Masoero and Pierre E. Levitz and Roland Jean-Marc Pellenq and Emanuela Del Gado}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {334, title = {Kinetic Simulations of Cement Creep: Mechanisms from Shear Deformations of Glasses}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {555-564}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

The logarithmic deviatoric creep of cement paste is a technical and scientific challenge. Transition State Theory (TST) indicates that some nanoscale mechanisms of shear deformation, associated with a specific kind of strain hardening, can explain the type of deviatoric creep observed experimentally in mature cement pastes. To test this possible explanation, we simulate the shear deformations of a colloidal model of cement hydrates at the nanoscale. Results from quasi-static simulations indicate a strain hardening analogous to that postulated by the TST approach. Additional results from oscillatory shear (fatigue) simulations show an increase of deformation with number of loading cycles that is consistent with the observed creep. These findings indicate that nanoscale simulations can improve our current understanding of the mechanisms underlying creep, with potential to go beyond the logarithmic creep and explore the onset of failure during tertiary creep.

}, doi = {10.1061/978078447934610.1061/9780784479346.068}, author = {Enrico Masoero and Mathieu Bauchy and Emanuela Del Gado and Hegoi Manzano and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {330, title = {The Meso-Scale Texture of Cement Hydrate Gels: Out-of-Equilibrium Evolution and Thermodynamic Driving}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures CONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {34-38}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015 Vienna, AustriaReston, VA}, abstract = {

By the end of cement hydration calcium-silicate-hydrate (C-S-H) gels extends over tens and hundreds of nanometers. Their complex texture affects directly, and to a large extent, the macroscopic hygrothermal and mechanical behavior of cement. Here we review a statistical physics approach recently developed, which allows us to investigate the gel formation under the out-of-equilibrium conditions typical of cement hydration and the role of the nano-scale structure in C\—S\—H mechanics upon hardening. Our investigations have unveiled the role, in the C-S-H gels, of nano-scale structural and mechanical heterogeneities that develop due to the the far-from-equilibrium physico-chemical environment in which the material forms. A subtle interplay between the out-of-equilibrium evolution and the effective interactions emerging between the nano-scale units of the gels at different stages of the hydration process ultimately determines the mesoscale texture of cement hydrates and their material properties.

}, doi = {10.1061/978078447934610.1061/9780784479346.005}, author = {Emanuela Del Gado and Katerina Ioannidou and Enrico Masoero and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @article {40, title = {Controlling local packing and growth in calcium-silicate-hydrate gels}, journal = {Soft Matter}, volume = {10}, year = {2014}, month = {Oct-2014}, pages = {1121-1133}, abstract = {

We investigate the development of gels under out-of-equilibrium conditions, such as calcium\–silicate\–hydrate (C\–S\–H) gels that form during cement hydration and are the major factor responsible for cement mechanical strength. We propose a new model and numerical approach to follow the gel formation upon precipitation and aggregation of nano-scale colloidal hydrates, whose effective interactions are consistent with forces measured in experiments at fixed lime concentrations. We use Grand Canonical Monte Carlo to mimic precipitation events during Molecular Dynamics simulations, with their rate corresponding to the hydrate production rate set by the chemical environment. Our results display hydrate precipitation curves that indeed reproduce the acceleration and deceleration regime typically observed in experiments and we are able to correctly capture the effect of lime concentration on the hydration kinetics and the gel morphology. Our analysis of the evolution of the gel morphology indicates that the acceleration is related to the formation of an optimal local crystalline packing that allows for large, elongated aggregates to grow and that is controlled by the underlying thermodynamics. The defects produced during precipitation favor branching and gelation that end up controlling the deceleration. The effects on the mechanical properties of C\–S\–H gels are also discussed.

Graphical abstract: Controlling local packing and growth in calcium{\textendash}silicate{\textendash}hydrate gels
}, doi = {10.1039/C3SM52232F}, author = {Katerina Ioannidou and Roland Jean-Marc Pellenq and Emanuela Del Gado} } @proceedings {99, title = {Modelling cement at fundamental scales: From atoms to engineering strength and durability}, journal = {Euro-C Conference}, volume = {COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, VOL 1}, year = {2014}, month = {2014}, pages = {139-148}, publisher = {CRC Press-Taylor \& Francis Group}, address = {MAR 24-27, 2014, St Anton am Alberg, AUSTRIA}, abstract = {

The mechanics and rheology of cement pastes are largely determined by the Calcium-Silicate-Hydrate (C-S-H) gel, which is normally the main binding phase. The C-S-H gel is an amorphous material with a nanoscale pore network. Here we consider a model structure of the gel, where a continuous molecular model of non-porous C-S-H is combined with a colloidal model that incorporates the porosity of the gel. Numerical simulations predict mechanical properties and microscopic processes associated with yielding under shear. The proposed model can now be used to extract further properties and to contribute to a broader effort aimed at describing and engineering the multi-scale structure and mechanical behaviour of the cement paste. We finally discuss the opportunities offered by our model with respect to the scientific and technological challenges of modelling and controlling ageing and creep over long time scales.

}, isbn = {978-1-138-02641-4; 978-1-315-76203-6}, doi = {10.1201/b16645-16}, author = {Enrico Masoero and Hamlin M. Jennings and Franz-Josef Ulm and Emanuela Del Gado and Hegoi Manzano and Roland Jean-Marc Pellenq and Sidney Yip}, editor = {Bicanic, N and Mang, H and Meschke, G and DeBorst, R} } @article {96, title = {Nano-scale mechanics of colloidal C-S-H gels}, journal = {Soft Matter}, volume = {10}, year = {2014}, month = {Jan-21-2014}, pages = {491-499}, type = {Article}, abstract = {

Gels of calcium-silicate-hydrates (C-S-H) are the glue that is largely responsible for the mechanical properties of cement. Despite their practical relevance, their nano-scale structure and mechanics are still mainly unexplored, because of the difficulties in characterizing them in a complex material like cement. We propose a colloidal model to investigate the gel mechanics emerging in the critical range of length-scales from several tens to hundreds of nanometers. We show that the size polydispersity of the hydrates and size-dependent effective interactions can explain the mechanical heterogeneities detected in nano-indentation experiments. We also show how these features control the arising of irreversible structural rearrangements under deformation, which are good candidates as nano-scale mechanisms underlying mechanical aging and slow structural relaxation in the gels.

Graphical abstract: Nano-scale mechanics of colloidal C{\textendash}S{\textendash}H gels
}, issn = {1744-683X}, doi = {10.1039/c3sm51815a}, author = {Enrico Masoero and Emanuela Del Gado and Roland Jean-Marc Pellenq and Sidney Yip and Franz-Josef Ulm} } @article {261, title = {A soft matter in construction {\textendash} Statistical physics approach to formation and mechanics of C{\textendash}S{\textendash}H gels in cement}, journal = {The European Physical Journal Special Topics}, volume = {223}, year = {2014}, month = {Oct-2014}, pages = {2285 - 2295}, abstract = {

Calcium-silicate hydrate (C-S-H) is the main binding agent in cement and concrete. It forms at the beginning of cement hydration, it progressively densifies as cement hardens and is ultimately responsible of concrete performances. This hydration product is a cohesive nano-scale gel, whose structure and mechanics are still poorly understood, in spite of its practical importance. Here we review some of the open questions for this fascinating material and a statistical physics approach recently developed, which allows us to investigate the gel formation under the out-of-equilibrium conditions typical of cement hydration and the role of the nano-scale structure in C-S-H mechanics upon hardening. Our approach unveils how some distinctive features of the kinetics of cement hydration can be related to changes in the morphology of the gels and elucidates the role of nano-scale mechanical heterogeneities in the hardened C-S-H.

}, issn = {1951-6355}, doi = {10.1140/epjst/e2014-02264-1}, author = {Emanuela Del Gado and Katerina Ioannidou and Enrico Masoero and Alain Baronnet and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip} } @article {48, title = {Nanostructure and nanomechanics of cement: polydisperse colloidal packing}, journal = {Physical review letters}, volume = {109}, year = {2012}, month = {Oct-10-2012}, pages = { Article Number: 155503}, abstract = {

Cement setting and cohesion are governed by the precipitation and growth of calcium-silicate-hydrate, through a complex evolution of microstructure. A colloidal model to describe nucleation, packing, and rigidity of calcium-silicate-hydrate aggregates is proposed. Polydispersity and particle size dependent cohesion strength combine to produce a spectrum of packing fractions and of corresponding elastic properties that can be tested against nanoindentation experiments. Implications regarding plastic deformations and reconciling current structural characterizations are discussed.

Figure

Figure

Figure

}, doi = {10.1103/PhysRevLett.109.155503}, author = {Enrico Masoero and Emanuela Del Gado and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip} }