@article {657, title = {Bilirubin oxidase-based silica macrocellular robust catalyst for on line dyes degradation}, journal = {Enzyme and Microbial Technology}, volume = {120}, year = {2019}, month = {Jan-01-2019}, pages = {77 - 83}, abstract = {

We present a new heterogeneous biocatalyst based on the grafting of Bilirubin Oxidase from Bacillus pumilus into macrocellular Si(HIPE) materials dedicated to water treatment. Due to the host intrinsic high porosity and monolithic character, on-line catalytic process is reached. We thus used this biocatalyst toward uni-axial flux decolorization of Congo Red and Remazol Brilliant Blue (RBBR) at two different pH (4 and 8.2), both in presence or absence of redox mediator. In absence of redox mediators, 40\% decolorization efficiency was reached within 24 h at pH 4 for Congo Red and 80\% for RBBR at pH 8.2 in 24 h. In presence of 10 mu M ABTS, it respectively attained 100\% efficiency after 2h and 12h. We have also demonstrated that non-toxic species were generated upon dyes decolorization. These results show that unlike laccases, this new biocatalyst exhibits excellent decolorization properties over a wide range of pH. Beyond, this enzymatic-based heterogeneous catalyst can be reused during two months being simply stored at room temperature while maintaining its decolorization efficiency. This study shows that this biocatalyst is a promising and robust candidate toward wastewater treatments, both in acidic and alkaline conditions where in the latter efficient decolorization strategies were still missing.

}, issn = {01410229}, doi = {10.1016/j.enzmictec.2018.10.004}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0141022918303466}, author = {Roucher, Armand and Roussarie, Elodie and Gauvin, R{\'e}gis M. and Rouhana, Jad and Gounel, S{\'e}bastien and Stines-Chaumeil, Claire and Mano, Nicolas and Backov, Renal} } @article {579, title = {Computing the linear viscoelastic properties of soft gels using an optimally windowed chirp protocol}, journal = {Journal of Rheology}, volume = {62}, year = {2018}, month = {Jul-2018}, pages = {1037 - 1050}, abstract = {

We use molecular dynamics simulations to investigate the linear viscoelastic response of a model three-dimensional particulate gel. The numerical simulations are combined with a novel test protocol (the optimally windowed chirp or OWCh), in which a continuous exponentially varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that (i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and (ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous damping and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By developing a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path toward novel multiscale insight into the rheological response for such complex materials. (C) 2018 The Society of Rheology.

}, issn = {0148-6055}, doi = {10.1122/1.5018715}, url = {http://sor.scitation.org/doi/10.1122/1.5018715}, author = {Bouzid, Mehdi and Keshavarz, Bavand and Geri, Michela and Divoux, Thibaut and Emanuela Del Gado and McKinley, Gareth H.} } @article {580, title = {Improving the practicality and safety of artificial corneas: Pre-assembly and gamma-rays sterilization of the Boston Keratoprosthesis}, journal = {The Ocular Surface}, volume = {16}, year = {2018}, month = {Jul-2018}, pages = {322 - 330}, abstract = {

Purpose: To make the Boston keratoprosthesis (B-KPro), together with its carrier corneal graft, more easily procured, transported and stored, as well as less expensive, easier for the surgeon to implant and safer for the patient, it is proposed that the B-KPro-graft combination be pre-assembled by an expert technician, followed by sterilization with gamma ray irradiation (GI) allowing long-term storage at room temperature. For this to be possible, it must be shown that the B-KPro itself (not only the graft) remains unharmed by the irradiation.

Methods: Polymethyl methacrylate (PMMA) discs and B-KPros were submitted to either ethylene oxide sterilization or different doses of GI. Cell biocompatibility, mechanical strength and optical quality were evaluated. The feasibility of assembling the B-KPro to a corneal graft, and gamma-radiate afterwards, was also assessed.

Results: There were no differences in cell biocompatibility between the samples. The optical evaluation showed high levels of transparency for all the groups. The absorbance of ultraviolet was higher for the groups treated with GI. The mechanical evaluation by nanoindentation showed no alterations of the PMMA discs after GI. The flexure test revealed a similar mechanical behavior. Technically, pre-assembly and GI of the B-KPro revealed no problems.

Conclusions: Sterilization of B-KPro using GI has no detrimental influence on the device. The pre-assembly of B-KPro to a donor cornea, followed by gamma sterilization, emerges as an efficient and safe procedure. (C) 2018 Elsevier Inc. All rights reserved.

}, keywords = {Artificial corneas; Boston keratoprosthesis; Gamma radiation; Gamma rays; Preassembly; Sterilization; Polymethyl methacrylate}, issn = {15420124}, doi = {10.1016/j.jtos.2018.04.002}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1542012418300442}, author = {Gonzalez-Andrades, Miguel and Sharifi, Roholah and Islam, Mohammad Mirazul and Divoux, Thibaut and Haist, Michael and Paschalis, Eleftherios I. and Gelfand, Larisa and Mamodaly, Shamina and Di Cecilia, Luca and Cruzat, Andrea and Franz-Josef Ulm and Chodosh, James and Delori, Francois and Dohlman, Claes H.} } @article {630, title = {Mesoscale structure, mechanics, and transport properties of source rocks{\textquoteright} organic pore networks}, journal = {Proceedings of the National Academy of Sciences}, volume = {115}, year = {2018}, month = {Dec-04-2018}, pages = {12365-12370}, abstract = {

Organic matter is responsible for the generation of hydrocarbons during the thermal maturation of source rock formation. This geochemical process engenders a network of organic hosted pores that governs the flow of hydrocarbons from the organic matter to fractures created during the stimulation of production wells. Therefore, it can be reasonably assumed that predictions of potentially recoverable confined hydrocarbons depend on the geometry of this pore network. Here, we analyze mesoscale structures of three organic porous networks at different thermal maturities. We use electron tomography with subnanometric resolution to characterize their morphology and topology. Our 3D reconstructions confirm the formation of nanopores and reveal increasingly tortuous and connected pore networks in the process of thermal maturation. We then turn the binarized reconstructions into lattice models including information from atomistic simulations to derive mechanical and confined fluid transport properties. Specifically, we highlight the influence of adsorbed fluids on the elastic response. The resulting elastic energy concentrations are localized at the vicinity of macropores at low maturity whereas these concentrations present more homogeneous distributions at higher thermal maturities, due to pores\&$\#$39; topology. The lattice models finally allow us to capture the effect of sorption on diffusion mechanisms with a sole input of network geometry. Eventually, we corroborate the dominant impact of diffusion occurring within the connected nanopores, which constitute the limiting factor of confined hydrocarbon transport in source rocks.

}, keywords = {porous media; electron tomography; mechanics; fluid transport; mesoscale}, issn = {0027-8424}, doi = {10.1073/pnas.1808402115}, url = {http://www.pnas.org/lookup/doi/10.1073/pnas.1808402115}, author = {Berthonneau, Jeremie and Ama{\"e}l Obliger and Valdenaire, Pierre-Louis and Grauby, Olivier and Ferry, Daniel and Chaudanson, Damien and Pierre E. Levitz and Kim, Jae Jin and Franz-Josef Ulm and Roland Jean-Marc Pellenq} } @article {611, title = {Surface temperatures in New York City: Geospatial data enables the accurate prediction of radiative heat transfer}, journal = {Scientific Reports}, volume = {8}, year = {2018}, month = {Feb-02-2018}, pages = { Article Number 2224 }, abstract = {

Despite decades of research seeking to derive the urban energy budget, the dynamics of thermal exchange in the densely constructed environment is not yet well understood. Using New York City as a study site, we present a novel hybrid experimental-computational approach for a better understanding of the radiative heat transfer in complex urban environments. The aim of this work is to contribute to the calculation of the urban energy budget, particularly the stored energy. We will focus our attention on surface thermal radiation. Improved understanding of urban thermodynamics incorporating the interaction of various bodies, particularly in high rise cities, will have implications on energy conservation at the building scale, and for human health and comfort at the urban scale. The platform presented is based on longwave hyperspectral imaging of nearly 100 blocks of Manhattan, in addition to a geospatial radiosity model that describes the collective radiative heat exchange between multiple buildings. Despite assumptions in surface emissivity and thermal conductivity of buildings walls, the close comparison of temperatures derived from measurements and computations is promising. Results imply that the presented geospatial thermodynamic model of urban structures can enable accurate and high resolution analysis of instantaneous urban surface temperatures.

}, keywords = {ENERGY-BALANCE; URBAN; STORAGE; MODEL; ALBEDO; FLUX}, doi = {10.1038/s41598-018-19846-5}, url = {http://www.nature.com/articles/s41598-018-19846-5}, author = {Ghandehari, Masoud and Emig, Thorsten and Aghamohamadnia, Milad} } @article {629, title = {Time-Resolved Mechanical Spectroscopy of Soft Materials via Optimally Windowed Chirps}, journal = {Physical Review X}, volume = {8}, year = {2018}, month = {Dec-06-2018}, pages = {Article Number 041042 }, abstract = {

The ability to measure the bulk dynamic behavior of soft materials with combined time and frequency resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domains, mainly due to the use of elementary input signals that have not been designed for fast time-evolving systems such as materials undergoing gelation, curing, or self-healing. In this work, we develop an optimized and robust excitation signal for time-resolved mechanical spectroscopy through the introduction of joint frequency- and amplitude-modulated exponential chirps. Inspired by the biosonar signals of bats and dolphins, we optimize the signal profile to maximize the signal-to-noise ratio while minimizing spectral leakage with a carefully designed modulation of the envelope of the chirp, obtained using a cosine-tapered window function. A combined experimental and numerical investigation reveals that there exists an optimal range of window profiles (around 10\% of the total signal length) that minimizes the error with respect to standard single-frequency sweep techniques. The minimum error is set by the noise floor of the instrument, suggesting that the accuracy of an optimally windowed-chirp (OWCh) sequence is directly comparable to that achievable with a standard frequency sweep, while the acquisition time can be reduced by up to 2 orders of magnitude, for comparable spectral content. Finally, we demonstrate the ability of this optimized signal to provide time- and frequency-resolved rheometric data by studying the fast gelation process of an acid-induced protein gel using repeated OWCh pulse sequences. The use of optimally windowed chirps enables a robust time-resolved rheological characterization of a wide range of soft materials undergoing rapid mutation and has the potential to become an invaluable rheometric tool for researchers across different disciplines.

}, doi = {10.1103/PhysRevX.8.041042}, url = {https://link.aps.org/doi/10.1103/PhysRevX.8.041042}, author = {Geri, Michela and Keshavarz, Bavand and Divoux, Thibaut and Clasen, Christian and Curtis, Daniel J. and McKinley, Gareth H.} } @article {244, title = {Crystal-chemistry control of the mechanical properties of 2:1 clay minerals}, journal = {Applied Clay Science}, volume = {143}, year = {2017}, month = {Jul-2017}, pages = {387 - 398}, abstract = {

Clay minerals are the main constituents of the clay matrix of a wide variety of sedimentary deposits. When subjected to burial, some of these minerals undergo phase transitions accompanied by atomic substitutions which ultimately impact the cohesive interactions between their constitutive layers. The most common among such transitions is smectite illitization, which is also highly relevant for oil and gas exploration and production from source rocks. The impact of this transition on the mechanical properties of clay minerals as well as clay bearing rocks remains, however, to be properly addressed. To this end, a set of macroscopic single 2:1 clay minerals (pyrophyllite, talc, vermiculite, phlogopite, muscovite, and clintonite) representative of the two octahedral fillings and the variation in surface charge densities was investigated. A hybrid experimental-modeling approach is proposed, which combines nanoindentation in orthogonal directions (x1 and x3-directions) with analytical derivations of the cohesive energy (Ui) using XRD and TEM-EDS measurements. The results highlight that the interlayer energy defines the elasticity (modulus M), strength (hardness H) and ductility behavior (M/H) of these materials; and not the bond energy stored into the constituent layers. This finding permits the derivation of predictive stiffness and strength functional relations as derivatives of the interlayer energy that account for the arrangement of nanoscale layers and the interlayer composition. These relations suggest that as the cohesion increases with the coulombic interactions through progressive smectite illitization, the system loses its capacity to dissipate applied energy by dislocation mechanisms in between the layers, entailing an increase in brittleness of the clay particles with burial. By way of conclusion, the geophysics and geochemistry implications of these results for predicting the macroscopic mechanical performance of clay bearing geomaterials, such as economically valuable source rocks, are discussed.

}, issn = {01691317}, doi = {10.1016/j.clay.2017.04.010}, author = {Berthonneau, Jeremie and Christian G. Hoover and Grauby, Olivier and Alain Baronnet and Roland Jean-Marc Pellenq and Franz-Josef Ulm} } @article {410, title = {Magnetism as indirect tool for carbon content assessment in nickel nanoparticles}, journal = {Journal of Applied Physics}, volume = {122}, year = {2017}, month = {Jul-12-2017}, pages = {213902}, abstract = {

We report a combined experimental and theoretical study to ascertain carbon solubility in nickel nanoparticles embedded into a carbon matrix via the one-pot method. This original approach is based on the experimental characterization of the magnetic properties of Ni at room temperature and Monte Carlo simulations used to calculate the magnetization as a function of C content in Ni nanoparticles. Other commonly used experimental methods fail to accurately determine the chemical analysis of these types of nanoparticles. Thus, we could assess the C content within Ni nanoparticles and it decreases from 8 to around 4\ at. \% with increasing temperature during the synthesis. This behavior could be related to the catalytic transformation of dissolved C in the Ni particles into graphite layers surrounding the particles at high temperature. The proposed approach is original and easy to implement experimentally since only magnetization measurements at room temperature are needed. Moreover, it can be extended to other types of magnetic nanoparticles dissolving carbon.

}, issn = {0021-8979}, doi = {10.1063/1.5006138}, url = {http://aip.scitation.org/doi/10.1063/1.5006138http://aip.scitation.org/doi/pdf/10.1063/1.5006138}, author = {Oumellal, Y. and Yann Magnin and {\'\i}nez de Yuso, A. and Aguiar Hualde, J. M. and Amara, H. and Paul-Boncour, V. and Matei Ghimbeu, C. and Malouche, A. and Christophe Bichara and Roland Jean-Marc Pellenq and Zlotea, C.} } @article {246, title = {Molecular Modeling and Adsorption Properties of Ordered Silica-Templated CMK Mesoporous Carbons}, journal = {Langmuir}, volume = {33}, year = {2017}, month = {Feb-06-2017}, pages = {2109 - 2121}, abstract = {

Realistic molecular models of silica-templated CMK-1, CMK-3, and CMK-5 carbon materials have been developed by using carbon rods and carbon pipes that were obtained by adsorbing carbon in a model MCM-41 pore. The interactions between the carbon atoms with the silica matrix were described using the PN-Traz potential, and the interaction between the carbon atoms was calculated by the reactive empirical bond order (REBO) potential. Carbon rods and pipes with different thicknesses were obtained by changing the silica\–carbon interaction strength, the temperature, and the chemical potential of carbon vapor adsorption. These equilibrium structures were further used to obtain the atomic models of CMK-1, CMK-3, and CMK-5 materials using the same symmetry as found in TEM pictures. These models are further refined and made more realistic by adding interconnections between the carbon rods and carbon pipes. We calculated the geometric pore size distribution of the different models of CMK-5 and found that the presence of interconnections results in some new features in the pore size distribution. Argon adsorption properties were investigated using GCMC simulations to characterize these materials at 77 K. We found that the presence of interconnection results greatly improves the agreement with available experimental data by shifting the capillary condensation to lower pressures. Adding interconnections also induces smoother adsorption/condensation isotherms, and desorption/evaporation curves show a sharp jump. These features reflex the complexity of the nanovoids in CMKs in terms of their pore morphology and topology.

Abstract Image

}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.6b04169}, author = {Jain, Surendra Kumar and Roland Jean-Marc Pellenq and Keith E. Gubbins and Peng, Xuan} } @article {608, title = {Numerical modeling of the tensile strength of a biological granular aggregate: Effect of the particle size distribution}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 08013}, abstract = {

Wheat grains can be considered as a natural cemented granular material. They are milled under high forces to produce food products such as flour. The major part of the grain is the so-called starchy endosperm. It contains stiff starch granules, which show a multi-modal size distribution, and a softer protein matrix that surrounds the granules. Experimental milling studies and numerical simulations are going hand in hand to better understand the fragmentation behavior of this biological material and to improve milling performance. We present a numerical study of the effect of granule size distribution on the strength of such a cemented granular material. Samples of bi-modal starch granule size distribution were created and submitted to uniaxial tension, using a peridynamics method. We show that, when compared to the effects of starch-protein interface adhesion and voids, the granule size distribution has a limited effect on the samples\’ yield stress.

}, doi = {10.1051/epjconf/201714008013}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714008013}, author = {Heinze, Karsta and Frank, Xavier and Val{\'e}rie Lullien-Pellerina and George, Matthieu and Farhang Radja{\"\i} and Jean-Yves Delenne}, editor = {Saeid Nezamabadi and Luding, S.} } @article {637, title = {Adsorption in heterogeneous porous media: Hierarchical and composite solids}, journal = {Microporous and Mesoporous Materials}, volume = {229}, year = {2016}, month = {Jul-15-2016}, pages = {145 - 154}, abstract = {

Experiment and molecular simulation are used to investigate adsorption in heterogeneous porous media consisting of hierarchical solids (combining different porosity scales) or composite solids (such as silver nanoparticles adsorbed at the external surface of zeolite). It is shown that adsorption in such heterogeneous materials can be written as a linear combination of the adsorption isotherms in its different domains (i.e. porosity scales for the hierarchical sample and constituents for the composite sample). In the case of the composite material, we also show that the linear combination can be used with weighing parameters obtained for a different adsorbate. Such a superimposition principle, which is validated using well-characterized experimental samples, is of interest for characterization purpose as well as industrial applications as they can be used to determine accurately the amount of phases in a given sample (volume corresponding to a given porosity scale or constituent). In contrast, significant departure between the experimental adsorption isotherm and the linear combination can be used to detect coupling effects between the different domains or restrained access to a given domain type. Such a characterization strategy of complex heterogeneous media is complementary to other experiments, such as those probing capillary hysteresis shapes, scanning curves and subloops, which allow determining the distribution of domains within the framework of the independent domain theory. (C) 2016 Elsevier Inc. All rights reserved.

}, issn = {13871811}, doi = {10.1016/j.micromeso.2016.04.011}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1387181116301032}, author = {Deliere, Ludovic and Fran{\c c}ois Villemot and David Farrusseng and Anne Galarneau and Topin, Sylvain and Benoit A. Coasne} } @article {267, title = {Bottom-up model for understanding the effects of wheat endosperm microstructure on its mechanical strength}, journal = {Journal of Food Engineering}, volume = {190}, year = {2016}, month = {Dec-2016}, pages = {40 - 47}, abstract = {

Wheat flours are essential ingredients of daily food products like bread, cookies or pastries. Their quality depends on the milling process and mechanical strength of wheat grains. Although it is well known that the strength and rupture of grains are strongly controlled by the endosperm microstructure, the respective roles of the starch and polymer volume fractions and their adhesion are not yet fully understood. This typical biological microstructure can be modeled as a cemented granular material, where the two size populations of starch granules (large:A-type, small:B-type) are the particles, and the protein matrix, which partially fills the space between granules, plays the role of a cement. This structural model of wheat endosperm is used, together with mechanical characteristics of starch and proteins obtained by means of Atomic Force Microscopy (AFM) measurements, to simulate the mechanical behavior and breakage of wheat endosperm in milling process. We find that the porosity outweighs the effect of other parameters for the elastic modulus, which declines as a nearly linear function of porosity. We also show that the tensile strength is an increasing function of the amount and connectivity of starch granules with increasing concentration of stresses along chains of granules. This effect is more significant at low porosity where stress distribution is mainly controlled by the contact network between starch granules. This effect explains why the protein content is not fully correlated to vitreousness, and samples of similar protein content can be different in vitreosity. Finally, we find that the starch-granule adhesion strongly affects the tensile strength whereas the effect of starch volume fraction appears mainly at high interface adhesion, which is the case of hard type wheat grains.

Fig.1. (a) Scanning Electron Micrograph of the fracture surface of a soft wheat{\textellipsis}

Fig.2. Illustration of the lattice approach for one step: (1) Initial lattice state{\textellipsis}

Fig.3. (a) Bidisperse granular sample generated with DEM for the highest starch volume{\textellipsis}

Fig.4. Example of samples submitted to tensile tests: (a) Maps of vertical stress{\textellipsis}

Fig.5. Stress-strain plots showing the effect of different values of the starch{\textellipsis}

Fig.6. Effective Young{\textquoteright}s modulus as a function of (a) protein volume fraction ρp and{\textellipsis}

}, issn = {02608774}, doi = {10.1016/j.jfoodeng.2016.06.009}, author = {Chichti, Emna and Val{\'e}rie Lullien-Pellerina and George, Matthieu and Farhang Radja{\"\i} and Rafik Aff{\`e}s and Jean-Yves Delenne} } @article {638, title = {Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles}, journal = {Chemistry - A European Journal}, volume = {22}, year = {2016}, month = {Jul-04-2016}, pages = {9660-9666}, abstract = {

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested.

}, doi = {10.1002/chem.201601351}, url = {http://doi.wiley.com/10.1002/chem.201601351}, author = {Deliere, Ludovic and Benoit A. Coasne and Topin, Sylvain and Gr{\'e}au, Claire and Moulin, Christophe and David Farrusseng} } @article {252, title = {Data analytics for simplifying thermal efficiency planning in cities}, journal = {Journal of The Royal Society Interface}, volume = {13}, year = {2016}, month = {Apr-2016}, pages = {Article Number: 20150971}, abstract = {

More than 44\% of building energy consumption in the USA is used for space heating and cooling, and this accounts for 20\% of national CO2emissions. This prompts the need to identify among the 130 million households in the USA those with the greatest energy-saving potential and the associated costs of the path to reach that goal. Whereas current solutions address this problem by analysing each building in detail, we herein reduce the dimensionality of the problem by simplifying the calculations of energy losses in buildings. We present a novel inference method that can be used via a ranking algorithm that allows us to estimate the potential energy saving for heating purposes. To that end, we only need consumption from records of gas bills integrated with a building\&$\#$39;s footprint. The method entails a statistical screening of the intricate interplay between weather, infrastructural and residents\&$\#$39; choice variables to determine building gas consumption and potential savings at a city scale. We derive a general statistical pattern of consumption in an urban settlement, reducing it to a set of the most influential buildings\&$\#$39; parameters that operate locally. By way of example, the implications are explored using records of a set of (N= 6200) buildings in Cambridge, MA, USA, which indicate that retrofitting only 16\% of buildings entails a 40\% reduction in gas consumption of the whole building stock. We find that the inferred heat loss rate of buildings exhibits a power-law data distribution akin to Zipf\&$\#$39;s law, which provides a means to map an optimum path for gas savings per retrofit at a city scale. These findings have implications for improving the thermal efficiency of cities\&$\#$39; building stock, as outlined by current policy efforts seeking to reduce home heating and cooling energy consumption and lower associated greenhouse gas emissions.

}, issn = {1742-5689}, doi = {10.1098/rsif.2015.0971}, author = {Mohammad Javad Abdolhosseini Qomi and Noshadravan, Arash and Sobstyl, Jake M. and Toole, Jameson and Ferreira, Joseph and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Gonzalez, Marta C.} } @article {618, title = {Electromagnetic Casimir energy of a disk opposite a plane}, journal = {Physical Review A}, volume = {94}, year = {2016}, month = {Sep-15-2016}, abstract = {

Building on work by J. Meixner [Z. Naturforschung 3a, 506 (1948)], we show how to compute the exact scattering amplitude (or T-matrix) for electromagnetic scattering from a perfectly conducting disk. This calculation is a rare example of a nondiagonal T-matrix that can nonetheless be obtained in a semianalytic form. We then use this result to compute the electromagnetic Casimir interaction energy for a disk opposite a plane, for arbitrary orientation angle of the disk, for separations greater than the disk radius. We find that the proximity force approximation (PFA) significantly overestimates the Casimir energy, in the case of both the ordinary PFA, which applies when the disk is parallel to the plane, and the \“edge PFA\”, which applies when the disk is perpendicular to the plane.

}, issn = {2469-9926}, doi = {10.1103/PhysRevA.94.032509}, url = {https://link.aps.org/doi/10.1103/PhysRevA.94.032509}, author = {Emig, Thorsten and Graham, Noah} } @article {247, title = {Evolution of organo-clay composites with respect to thermal maturity in type II organic-rich source rocks}, journal = {Geochimica et Cosmochimica Acta}, volume = {195}, year = {2016}, month = {Dec-15-2016}, pages = {68 - 83}, abstract = {

Among the proposed pathways of sequestration and progressive transformation of organic matter (OM) during burial, the sorptive protection mechanism explains the strong relationship between total organic carbon (TOC) and mineral surface area (MSA) noted in numerous black shales around the globe. The complete mechanistic framework of preservation and evolution of OM in organo-mineral complexes remains, however, an enigma. On one hand, smectite layers composing the clay fraction are known to have a major influence on available surface area. OM maturation occurs, on the other hand, concurrently with the smectite illitization that provokes the closure of the interlayer spaces. The potential of smectite layers in the sequestration and preservation of organic molecules and the fate of these molecules with respect to the smectite illitization were therefore addressed. Here, the mineralogy of three organic-rich source rocks of various maturities was characterized in regards with the geochemistry of their OM. A thorough examination of the clay minerals present in the clay matrices provided evidences of mixed layer minerals containing smectite and illite layers with an increasing illite component with respect to maturity. The comprehensive interpretation of the X-ray diffractograms and analytical electron microscopy results suggested the presence of organic molecules in the inter-particulate and possibly the interlayer spaces of the smectite-rich components in immature source rocks. This eventuality was further supported by the presence of intercalated clay-organic nanocomposites observed by transmitted electron microscopy coupled with energy dispersive spectroscopy. Textural observations also showed that the increased illite content found in the overmature sample led to the reorganization of the OM and the clay particles into nano-scale aggregates. These results clarify the geochemical mechanism beyond the reported relationship between TOC and MSA and allow generalizing it to various organic-rich source rocks. Eventually, the understanding of the close organo-clay association raises prospects on the prediction of the evolution of the mechanical properties of economically valuable source rocks with respect to maturity.

}, issn = {00167037}, doi = {10.1016/j.gca.2016.09.008}, author = {Berthonneau, Jeremie and Grauby, Olivier and Muhannad Abuhaikal and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Henri Van Damme} } @article {641, title = {Probing Interconnectivity in Hierarchical Microporous/Mesoporous Materials Using Adsorption and Nuclear Magnetic Resonance Diffusion}, journal = {The Journal of Physical Chemistry C}, volume = {120}, year = {2016}, month = {Jan-28-2016}, pages = {1562-1569}, abstract = {

Adsorption and transport in hierarchical materials are investigated by means of adsorption and nuclear magnetic resonance experiments. Using micro/mesoporous zeolites with well-defined mesoporosity, we show that adsorption at a given pressure can be described as a simple linear combination of the adsorbed amounts taken at the same pressure for the pure microporous (zeolite FAU-Y) and mesoporous (Al-MCM-41) solids. Such a quantitative decomposition allows us to demonstrate the ability of diffusion measurements by Pulsed Field Gradient Nuclear Magnetic Resonance (PFG NMR) to probe interconnectivity in hierarchical solids. On the one hand, transport in the mechanical mixtures can be described as the superimposition of diffusion in pure microporous and mesoporous solids. On the other hand, PFG NMR for the hierarchical sample provides an effective diffusivity that is intermediate between those for the pure zeolite and mesoporous silica. Furthermore, this effective diffusivity is slower than the linear combination of the two diffusivities weighted by the number of molecules present in each phase (used in the independent domain and fast-exchange theories) clearly showing interconnectivities and transfer limitations between the microporous and mesoporous domains. We also discuss the ability of combining theories such as the fast exchange model and the effective medium theory to quantitatively predict diffusion in such microporous/mesoporous materials.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b10129}, url = {http://pubs.acs.org/doi/10.1021/acs.jpcc.5b10129}, author = {Anne Galarneau and Guenneau, Flavien and Gedeon, Antoine and Mereib, Diaa and Rodriguez, Jeremy and Fajula, Fran{\c c}ois and Benoit A. Coasne} } @article {195, title = {Realistic molecular model of kerogen{\textquoteright}s nanostructure}, journal = {Nature Materials}, year = {2016}, month = {Feb-01-2016}, abstract = {

Despite kerogen\’s importance as the organic backbone for hydrocarbon production from source rocks such as gas shale, the interplay between kerogen\’s chemistry, morphology and mechanics remains unexplored. As the environmental impact of shale gas rises, identifying functional relations between its geochemical, transport, elastic and fracture properties from realistic molecular models of kerogens becomes all the more important. Here, by using a hybrid experimental\–simulation method, we propose a panel of realistic molecular models of mature and immature kerogens that provide a detailed picture of kerogen\’s nanostructure without considering the presence of clays and other minerals in shales. We probe the models\’ strengths and limitations, and show that they predict essential features amenable to experimental validation, including pore distribution, vibrational density of states and stiffness. We also show that kerogen\’s maturation, which manifests itself as an increase in the sp2/sp3 hybridization ratio, entails a crossover from plastic-to-brittle rupture mechanisms.

Kerogen in organic-rich shale formations.

Reconstruction of molecular models of kerogens.

Experimental validation of the molecular models.

Elastic properties of molecular models of kerogen.

}, issn = {1476-1122}, doi = {10.1038/nmat4541}, author = {Bousige, Colin and Ghimbeu, Cam{\'e}lia Matei and Vix-Guterl, Cathie and Pomerantz, Andrew E. and Suleimenova, Assiya and Vaughan, Gavin and Garbarino, Gaston and Feygenson, Mikhail and Wildgruber, Christoph and Franz-Josef Ulm and Roland Jean-Marc Pellenq and Benoit A. Coasne} } @article {179, title = {Advances in design and modeling of porous materials}, journal = {The European Physical Journal Special Topics}, volume = {224}, year = {2015}, month = {Jul-2015}, pages = {1653 - 1653}, abstract = {

This special issue of the European Physical Journal Special Topics is dedicated to selected papers from the symposium \“High surface area porous and granular materials\” organized in the frame of the conference \“Mat\ériaux 2014\”, held on November 24\–28, 2014 in Montpellier, France.

Porous materials and granular materials gather a wide variety of heterogeneous, isotropic or anisotropic media made of inorganic, organic or hybrid solid skeletons, with open or closed porosity, and pore sizes ranging from the centimeter scale to the sub-nanometer scale. Their technological and industrial applications cover numerous areas from building and civil engineering to microelectronics, including also metallurgy, chemistry, health, waste water and gas effluent treatment. Many emerging processes related to environmental protection and sustainable development also rely on this class of materials. Their functional properties are related to specific transfer mechanisms (matter, heat, radiation, electrical charge), to pore surface chemistry (exchange, adsorption, heterogeneous catalysis) and to retention inside confined volumes (storage, separation, exchange, controlled release). The development of innovative synthesis, shaping, characterization and modeling approaches enables the design of advanced materials with enhanced functional performance. The papers collected in this special issue offer a good overview of the state-of-the-art and science of these complex media.

We would like to thank all the speakers and participants for their contribution to the success of the symposium. We also express our gratitude to the organization committee of \“Mat\´eriaux 2014\”. We finally thank the reviewers and the staff of the European Physical Journal Special Topics who made the publication of this special issue possible.

}, issn = {1951-6355}, doi = {10.1140/epjst/e2015-02487-6}, author = {Ayral, Andre and Calas-Etienne, Sylvie and Benoit A. Coasne and Deratani, Andr{\'e} and Evstratov, Alexis and Anne Galarneau and Grande, Daniel and Hureau, Matthieu and Jobic, Herv{\'e} and Morlay, Catherine and Parmentier, Julien and Prelot, B{\'e}n{\'e}dicte and Rossignol, Sylvie and Simon-Masseron, Ang{\'e}lique and Thibault-Starzyk, Fr{\'e}d{\'e}ric} } @article {176, title = {Control of the Pore Texture in Nanoporous Silicon via Chemical Dissolution}, journal = {Langmuir}, volume = {31}, year = {2015}, month = {Jul-28-2015}, pages = {8121 - 8128}, abstract = {
Abstract Image

The surface and textural properties of porous silicon (pSi) control many of its physical properties essential to its performance in key applications such as optoelectronics, energy storage, luminescence, sensing, and drug delivery. Here, we combine experimental and theoretical tools to demonstrate that the surface roughness at the nanometer scale of pSi can be tuned in a controlled fashion using partial thermal oxidation followed by removal of the resulting silicon oxide layer with hydrofluoric acid (HF) solution. Such a process is shown to smooth the pSi surface by means of nitrogen adsorption, electron microscopy, and small-angle X-ray and neutron scattering. Statistical mechanics Monte Carlo simulations, which are consistent with the experimental data, support the interpretation that the pore surface is initially rough and that the oxidation/oxide removal procedure diminishes the surface roughness while increasing the pore diameter. As a specific example considered in this work, the initial roughness \ξ \∼ 3.2 nm of pSi pores having a diameter of 7.6 nm can be decreased to 1.0 nm following the simple procedure above. This study allows envisioning the design of pSi samples with optimal surface properties toward a specific process.

}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.5b01518}, author = {Secret, Emilie and Wu, Chia-Chen and Chaix, Arnaud and Anne Galarneau and Gonzalez, Philippe and Cot, Didier and Sailor, Michael J. and Jestin, Jacques and Zanotti, Jean-Marc and Cunin, Fr{\'e}d{\'e}rique and Benoit A. Coasne} } @article {163, title = {Diffusion of Interlayer Cations in Swelling Clays as a Function of Water Content: Case of Montmorillonites Saturated with Alkali Cations}, journal = {The Journal of Physical Chemistry C}, volume = {119}, year = {2015}, month = {May-14-2015}, pages = {10370 - 10378}, abstract = {
Abstract Image

Swelling clays act as ion-exchange membranes owing to the presence of extra-framework ions surrounded by water molecules. A better understanding of the motion of the ions present in the pore space is required to predict the diffusion properties in these solids. Since water molecules tend to adsorb both on ions and clay surfaces, they moderate the interactions between the ions and the framework. The hydration of ions therefore has an impact on their diffusion properties. In this paper, the MX-80 montmorillonite considered for nuclear waste disposal applications has been selected and studied using an approach combining measurements of complex impedance spectroscopy and water adsorption isotherms. The number of charge carriers has been estimated, and the diffusion coefficient for interlayer cations at various hydration states was determined. The evolution of the diffusion coefficient is subsequently correlated with the effect of the opening of the interlayer space and its hydration state. The resulting picture sheds light on the reversible or irreversible character of ion exchange. Finally, our results obtained from the difference between the interlayer diffusion coefficients extracted from conductivity measurements and those obtained at the macroscopic scale is discussed in terms of the textural parameters.

}, issn = {1932-7447}, doi = {10.1021/jp512986d}, author = {Salles, Fabrice and Douillard, Jean-Marc and Bildstein, Olivier and El Ghazi, Samira and Prelot, B{\'e}n{\'e}dicte and Zajac, Jerzy and Henri Van Damme} } @proceedings {343, title = {Evolution of particle size distributions in crushable granular materials}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2015}, month = {Feb-02-2015}, pages = {275 - 280}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

By means of the contact dynamics method together with a particle fracture model, in which the particles are cohesive aggregates of irreducible polygonal fragments, we investigate the evolution of particle size distribution in the process of uniaxial compaction of granular materials. The case of single particle breakup under compressive stress is used to test the method and the influence of discretization (number of irreducible fragments). We show that the breaking threshold of the granular assembly scales with the internal cohesion of the particles but it depends also on the initial size distribution and irregularity of polygonal particle shapes. The evolution of size distribution proceeds by consecutive periods of intense particle crushing, characterized by local shattering instability, and periods of little breaking activity. Starting with either monodisperse or power-law distribution of particle sizes, the latter evolves towards a broad distribution of the fragmented particles with a nearly power-law distribution in the range of intermediate particle sizes. Interestingly, a finite number of large particles survive despite ongoing crushing process due to the more homogeneous distribution of forces in the presence of small fragmented particles filling the pores between larger particles.

}, isbn = {978-1-138-02707-7}, doi = {10.1201/b1739510.1201/b17395-48}, author = {Duc-Hanh Nguyen and Emilien Az{\'e}ma and Farhang Radja{\"\i} and Philippe Sornay}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin and Kuo, Matthew} } @article {146, title = {Investigating carbon materials nanostructure using image orientation statistics}, journal = {Carbon}, volume = {84}, year = {2015}, month = {Apr-2015}, pages = {160 - 173}, abstract = {

A new characterization method of the lattice fringe images of turbostratic carbons is proposed. This method is based on the computation of their orientation field without explicit detection of fringes. It allows meaningful insights into the material nanostructure and nanotexture at several scales, either qualitatively or quantitatively. The calculation of pairwise spatial statistics of the orientation field at short distance provides measurements of the coherence lengths along any direction, in particular along and orthogonally to the layers. These statistics also allow representing orientation coherence patterns typical of the observed nanostructure. At larger distances, the mean disorientation of the fringes is computed and information about the homogeneity of the sample is obtained. An experimental validation is carried out on various artificial images and an application to the characterization of four bulk turbostratic carbons is provided.

}, issn = {00086223}, doi = {10.1016/j.carbon.2014.11.048}, author = {J. Philippe Da-Costa and Weisbecker, P. and Baptiste Farbos and Jean-Marc Leyssale and G{\'e}rard L. Vignoles and Germain, C.} } @article {646, title = {Les mat{\'e}riaux poreux : un domaine scientifique et technologique pluridisciplinaire au futur radieux}, journal = {Mat{\'e}riaux \& Techniques}, volume = {103}, year = {2015}, month = {2015}, pages = {701}, abstract = {

Porous materials cover a broad multidisciplinary scientific and technological domain. They are used in numerous existing and emerging devices and processes related to key societal issues both in environmental protection and for the benefit of the economy. Our choice was to illustrate advances in porous materials through three specific examples: porous materials engineering in the case of organic mesoporous materials prepared from block polymers, modeling and numerical simulation of adsorption of molecular species at the nanoscale and, finally technological applications as thermal insulators.

}, issn = {0032-6895}, doi = {10.1051/mattech/2015050}, url = {http://www.mattech-journal.org/10.1051/mattech/2015050}, author = {Ayral, Andre and Calas-Etienne, Sylvie and Benoit A. Coasne and Deratani, Andr{\'e} and Grande, Daniel and Quemener, Damien and Rossignol, Sylvie} } @article {145, title = {Mechanism of strength reduction along the graphenization pathway}, journal = {Science Advances}, volume = {1}, year = {2015}, month = {Nov-20-2015}, pages = {e1501009 - e1501009}, abstract = {

Even though polycrystalline graphene has shown a surprisingly high tensile strength, the influence of inherent grain boundaries on such property remains unclear. We study the fracture properties of a series of polycrystalline graphene models of increasing thermodynamic stability, as obtained from a long molecular dynamics simulation at an elevated temperature. All of the models show the typical and well-documented brittle fracture behavior of polycrystalline graphene; however, a clear decrease in all fracture properties is observed with increasing annealing time. The remarkably high fracture properties obtained for the most disordered (less annealed) structures arise from the formation of many nonpropagating prefracture cracks, significantly retarding failure. The stability of these reversible cracks is due to the nonlocal character of load transfer after a bond rupture in very disordered systems. It results in an insufficient strain level on neighboring bonds to promote fracture propagation. Although polycrystallinity seems to be an unavoidable feature of chemically synthesized graphenes, these results suggest that targeting highly disordered states might be a convenient way to obtain improved mechanical properties.

}, doi = {10.1126/sciadv.1501009}, author = {Antonio Gamboa and Baptiste Farbos and Aurel, P. and G{\'e}rard L. Vignoles and Jean-Marc Leyssale} } @article {625, title = {Native Morphology of Hydrated Spheroidal Halloysite Observed by Environmental Transmission Electron Microscopy}, journal = {Clays and Clay Minerals}, volume = {63}, year = {2015}, month = {Oct-2015}, pages = {368 - 377}, abstract = {

Natural mineral materials such as tabular and spheroidal halloysites have recently been suggested as candidates for intercalating metal ions or organic molecules. Their potential use as nano-adsorbents is related to their porous structure and water content. Although the two morphologies can coexist in natural deposits, spheroidal halloysites remain poorly characterized whereas much literature exists on tubular halloysites. The present study investigates the native morphology, internal porous structure, and behavior upon dehydration of spheroidal halloysite from Opotiki (New Zealand). This mineral was characterized in its natural hydrated state using a transmission electron microscope equipped with an environmental cell (EC-TEM). The sample was placed in a sealed block in which water vapor-saturated air circulated at a pressure of 30 Torr. The observed particles consisted of almost complete spheroids displaying polyhedral external surfaces. 1:1 layers stack concentrically as a pore-free, onion-like structure. The dynamic processes of dehydration created by slow depressurization of the cell resulted in a decrease in the layer-to-layer distance (d001) from ~10 \Å to ~7 \Å due to the loss of interlayer water molecules. Irreversible formation of spurious \‘internal pores\’ was recorded during this process. These pores were not indigenous to the hydrated 10 \Å halloysite and resulted from the collapse of the native layers. They cannot account for the physical chemical properties of spheroidal halloysite. Spheroidal halloysites would have a lower propensity for intercalating ions or molecules than tubular halloysites. Isolated facets were also observed in high-resolution-TEM and displayed a pseudo-hexagonal morphology. The three-dimensional microstructure of the spheroid appeared bent along the three pseudo equivalent yi directions of the kaolinite-like single layers. An analogy with polyhedral serpentine has allowed the proposal of a formation process of hydrated spheroidal halloysite triggered by enrichment in divalent ions in the growth system.

}, issn = {00098604}, doi = {10.1346/CCMN.2015.0630503}, url = {http://openurl.ingenta.com/content/xref?genre=article\&issn=0009-8604\&volume=63\&issue=5\&spage=368}, author = {Berthonneau, Jeremie and Grauby, Olivier and Jeannin, Charlotte and Chaudanson, Damien and Joussein, Emmanuel and Alain Baronnet} } @article {144, title = {On the prediction of graphene{\textquoteright}s elastic properties with reactive empirical bond order potentials}, journal = {Carbon}, volume = {89}, year = {2015}, month = {Aug-2015}, pages = {176 - 187}, abstract = {

The elastic properties of graphene as described by the reactive empirical bond order potential are studied through uniaxial tensile tests calculations at both zero temperature, with a conjugate gradient approach, and room temperature, with molecular dynamics simulations. A perfect linear elastic behavior is observed at 0\ K up to \≈0.1\% strain. The Young\’s modulus and Poisson\’s ratio obtained with this potential are of \≈730\ GPa and 0.39, respectively, with little chirality effects. These values differ significantly from former estimations, much closer to experimental values. We show that these former values have certainly been obtained by neglecting the effect of atomic relaxation, leading to a severe inaccuracy. At larger strains, an extended apparent linear domain is observed in the stress\–strain curves, which is relevant to Young\’s modulus calculations at finite temperature. Our molecular dynamics simulations at 300\ K have allowed obtaining the following, chirality dependent, apparent Young\’s moduli, 860 and 761\ GPa, and Poisson\’s ratios, 0.12 and 0.23, for armchair and zigzag loadings, respectively.

}, issn = {00086223}, doi = {10.1016/j.carbon.2015.03.035}, author = {Antonio Gamboa and G{\'e}rard L. Vignoles and Jean-Marc Leyssale} } @article {108, title = {Adsorption and Dynamics in Hierarchical Metal-Organic Frameworks}, journal = {Journal of Physical Chemistry C}, volume = {118}, year = {2014}, month = {Apr-10-2014}, pages = {7423-7433}, type = {Article}, abstract = {

Adsorption and dynamics in hierarchical metal-organic frameworks are investigated by means of molecular simulation. The models of hierarchical porous solids are obtained by carving mesopores of different diameters out of a crystal of Cu-BTC (model A) or by inserting a microporous particle of Cu-BTC in an amorphous silica mesopore (model B). We show that the nitrogen adsorption isotherms at 77 K for the solids corresponding to model A can be described as a linear combination of reference adsorption isotherms for pure microporous and mesoporous solids. In contrast, the adsorption isotherms for model B cannot be described accurately as a sum of reference microporous and mesoporous adsorption isotherms. The inserted particle acts as a constriction which helps nucleate the liquid phase within the mesopore so that no capillary condensation hysteresis is observed. The dynamics of nitrogen adsorbed at 77 K inside the porosity of the hierarchical solids is also investigated. The Fickian regime is reached at long times which are not attainable with molecular dynamics simulations. At higher temperature, the faster self-diffusion makes it possible to obtain the diffusivity of the adsorbate. Nitrogen adsorbed in the microporosity of the hierarchical porous solids has a self-diffusion coefficient close to that of nitrogen adsorbed in pure Cu-BTC. In contrast, diffusion in the mesoporosity is faster than in the microporosity so that the overall diffusivity is faster than in pure Cu-BTC.

\<\>Abstract Image

}, issn = {1932-7447}, doi = {10.1021/jp500037z}, author = {Fran{\c c}ois Villemot and Anne Galarneau and Benoit A. Coasne} } @article {64, title = {Adsorption-based characterization of hierarchical metal{\textendash}organic frameworks}, journal = {Adsorption}, volume = {20}, year = {2014}, month = {Feb-2014}, pages = {349-357}, abstract = {

Nitrogen adsorption at 77 K on metal\–organic framework (MOF) is investigated by means of molecular simulations. We consider both regular Cu\–BTC crystal and a MOF-based hierarchical porous solid consisting of a mesopore carved out of a Cu\–BTC crystal. The t-plot method is applied to these solids by using a non-porous Cu\–BTC surface as the reference sample. The values of the mesoporous and external surface areas are determined from the t-plot, and the validity of the method for this type of hierarchical solid is discussed.

}, keywords = {Adsorption, Hierarchical porous materials, Molecular simulation, t-Plot}, issn = {0929-5607}, doi = {10.1007/s10450-013-9583-7}, author = {Fran{\c c}ois Villemot and Anne Galarneau and Benoit A. Coasne} } @article {107, title = {An artificial primitive mimic of the Gramicidin-A channel}, journal = {Nature Communications}, volume = {5}, year = {2014}, month = {Jun-26-2014}, type = {Article}, abstract = {

Gramicidin A (gA) is the simplest known natural channel, and important progress in improving conduction activity has previously been obtained with modified natural gAs. However, simple artificial systems mimicking the gA functions are unknown. Here we show that gA can be mimicked using a simple synthetic triazole or {\textquoteleft}T-channel\&$\#$39; forming compound (TCT), having similar constitutional functions as the natural gAs. As in gA channels, the carbonyl moieties of the TCT, which point toward the T-channel core and surround the transport direction, are solvated by water. The net-dipolar alignment of water molecules along the chiral pore surfaces influences the conduction of protons/ions, envisioned to diffuse along dipolar hydrophilic pathways. Theoretical simulations and experimental assays reveal that the conduction through the T-channel, similar to that in gA, presents proton/water conduction, cation/anion selectivity and large open channel-conductance states. T-channels-associating supramolecular chirality with dipolar water alignment-represent an artificial primitive mimic of gA.

Molecular structures and crystal packing.

Molecular simulations of water molecules and ions confined within T-channel.

Bilayer membrane transport experiments.

Single channel conductance of T-channels under {\textquoteleft}early stage{\textquoteright} conductance records.

}, issn = {2041-1723}, doi = {10.1038/ncomms5142}, author = {Barboiu, Mihail and Le Duc, Yann and Gilles, Arnaud and Pierre-Andre Cazade and Michau, Mathieu and Yves-Marie Legrand and Arie Van Der Lee and Benoit A. Coasne and Parvizi, Paria and Post, Joshua and Fyles, Thomas} } @proceedings {346, title = {Geomechanics from Micro to MacroInteraction between two localized fluidization cavities in granular media : Experiments and numerical simulation}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Sep-2014}, pages = {1571 - 1576}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

In this work, we present experimental and numerical results on the interaction between two localized fluidization cavities in an immersed granular packing. According to the gap between the two locally injected upward fluid flows, each fluidized cavity will evolve independently of the another, or conversely, the two cavities can interact with each other: they merge and eventually behave like a single cavity. Combined optical techniques are used for visualization of particle motion inside the granular media (Refractive Index-Matching between liquid and beads and Planar Laser-Induced Fluorescence), the experimental results are compared to a two-dimensional simulation based on coupled Discrete Element and Lattice Boltzmann Methods (DEM-LBM).

}, isbn = {978-1-138-02707-7}, doi = {10.1201/b17395-286}, author = {Jeff Ngoma and Pierre Philippe and St{\'e}phane Bonelli and Jean-Yves Delenne and Farhang Radja{\"\i}}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin and Kuo, Matthew} } @proceedings {344, title = {Lattice Boltzmann modeling of liquid clusters in granular media}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Dec-03-2014}, pages = {461 - 466}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

We use capillary condensation simulated by a multiphase Lattice Boltzmann model as a means to generate homogeneous distributions of liquid clusters in 2D granular media. Liquid droplets condense from the vapor phase between and on the grains, and they transform into capillary bonds and liquid clusters as thermodynamic equilibrium is approached. As the amount of condensed liquid is increased, liquid clusters of increasing connectivity are formed and the distribution of liquid undergoes topological transitions until the whole pore space is filled by the liquid. We investigate the cluster statistics and local grain environments. From extensive simulations, we also obtain the mean Laplace pressure as a function of the amount of liquid, which is found to be quite similar to the well-known experimental retention curve in soil mechanics.

}, isbn = {978-1-138-02707-7}, doi = {10.1201/b1739510.1201/b17395-83}, author = {Jean-Yves Delenne and Vincent Richefeu and Farhang Radja{\"\i}}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin and Kuo, Matthew} } @proceedings {342, title = {Modelling soft-particle materials}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Aug-26-2014}, pages = {43-48}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

Soft-particle materials include colloidal pastes, vesicles, many powders, microgels and suspensions. They share the common feature of being composed of particles that can undergo large deformations without rupture. For the simulation of such materials, we present a modelling approach based on an implicit formulation of the Material Point Method (MPM) interfaced with the Contact Dynamics (CD) method for the treatment of frictional contacts between particles. Each particle is discretized as a collection of material points. The information carried by the material points is projected onto a background mesh, where equations of motion are solved. The mesh solution is then used to update the material points. The implicit formulation of MPM allows for unconditional numerical stability and efficient coupling with implicit treatment of unilateral contacts and friction between the particles by the CD method. We use this model to analyse the compaction process of 2D soft-particle packings. The packing can reach high solid fractions by particle shape change and still flow plastically. The compaction is a nonlinear process in which new contacts are formed between particles and the contact areas increase. We find that the evolution of the packing fraction is a slow logarithmic function of the driving stress as a consequence of increasing contact area. We also evidence the effect of friction, which favours strong stress chains and thus the elongation of particles, leading to a larger packing fraction at a given level of compressive stress as compared to a frictionless particle packing.

}, url = {http://prodinra.inra.fr/record/370208}, author = {Saeid Nezamabadi and Farhang Radja{\"\i} and Julien Averseng}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin} } @article {87, title = {Pressure effects in confined nanophases}, journal = {Molecular Simulation}, volume = {40}, year = {2014}, month = {Feb-05-2014}, pages = {721-730}, type = {Article}, abstract = {

In this article, we review how pressure effects in pores affect both the physics of the confined fluid and the properties of the host porous material. Molecular simulations in which high-pressure effects were observed are first discussed; we will see how the strong dependence on bulk phase pressure of the freezing temperature of a fluid confined in nanopores can be explained by important variations of the pressure within the pore. We then discuss recent works in which direct calculations of the pressure tensor of fluids confined in pores provide evidence for large pressure enhancements. Finally, practical applications of these pressure effects in which gas adsorption in microporous solids (pore size \<2nm) was found to enhance their mechanical properties by increasing the elastic modulus by a factor 4 are discussed.

}, keywords = {confinement, high-pressure effects, mechanical properties, porous materials}, issn = {0892-7022}, doi = {10.1080/08927022.2013.829227}, author = {Benoit A. Coasne and Yun Long and Keith E. Gubbins} } @proceedings {345, title = {Shear flow of dense granular suspensions by computer simulations}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Apr-2014}, pages = {467-472}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

We analyze the shear flow of dense granular materials composed of circular particles immersed in a viscous fluid by means of Molecular Dynamics simulations interfaced with the Lattice Boltzmann Method. A homogeneous flow of the suspension is obtained through periodic boundary conditions and by directly applying a confining pressure on the granular phase and shearing the fluid phase. The stead-state rheology can be described in terms of effective friction coefficient and packing fraction of the suspension as a function of the ratio of viscous shear stress to confining pressure (frictional description), on one hand, and in terms of normal and shear viscosities of the suspension as a function of the packing fraction (viscous description), on the other hand. We show that the simulation data are consistent with both descriptions and in close agreement with the corresponding scaling laws observed in recent experiments.

}, url = {http://prodinra.inra.fr/record/369542}, author = {L. Amarsid and Patrick Mutabaruka and Jean-Yves Delenne}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin} } @article {67, title = {Sub-additive ionic transport across arrays of solid-state nanopores}, journal = {Physics of Fluids (1994-present)}, volume = {26}, year = {2014}, month = {Jan-31-2014}, pages = {012005}, abstract = {

Nanopores, either biological, solid-state, or ultrathin pierced graphene, are powerful tools which are central to many applications, from sensing of biological molecules to desalination and fabrication of ion selective membranes. However, the interpretation of transport through low aspect-ratio nanopores becomes particularly complex as 3D access effects outside the pores are expected to play a dominant role. Here, we report both experiments and theory showing that, in contrast to na\ïve expectations, long-range mutual interaction across an array of nanopores leads to a non-extensive, sub-linear scaling of the global conductance on the number of pores N. A scaling analysis demonstrates that the N-dependence of the conductance depends on the topology of the network. It scales like G \∼ N/log\ N for a 1D line of pores, and like G\∼\√\‾\‾N for a 2D array, in agreement with experimental measurements. Our results can be extended to alternative transport phenomena obeying Laplace equations, such as diffusive, thermal, or hydrodynamic transport. Consequences of this counter-intuitive behavior are discussed in the context of transport across thin membranes, with applications in energy harvesting.

Image of FIG. 1.
Image of FIG. 2.
Image of FIG. 3.
Image of FIG. 4.
Image of FIG. 5.
Image of FIG. 6.
}, doi = {10.1063/1.4863206}, author = {Gadaleta, A and Sempere, C and Simon Gravelle and A. Siria and Fulcrand, R and Christophe Ybert and Lyd{\'e}ric Bocquet} } @article {92, title = {Validity of the t-plot Method to Assess Microporosity in Hierarchical Micro/Mesoporous Materials}, journal = {Langmuir}, volume = {30}, year = {2014}, month = {Nov-2014}, pages = {13266-13274}, type = {Article}, abstract = {
Abstract Image

The t-plot method is a well-known technique which allows determining the micro- and/or mesoporous volumes and the specific surface area of a sample by comparison with a reference adsorption isotherm of a nonporous material having the same surface chemistry. In this paper, the validity of the t-plot method is discussed in the case of hierarchical porous materials exhibiting both micro- and mesoporosities. Different hierarchical zeolites with MCM-41 type ordered mesoporosity are prepared using pseudomorphic transformation. For comparison, we also consider simple mechanical mixtures of microporous and mesoporous materials. We first show an intrinsic failure of the t-plot method; this method does not describe the fact that, for a given surface chemistry and pressure, the thickness of the film adsorbed in micropores or small mesopores (\< 10\σ, \σ being the diameter of the adsorbate) increases with decreasing the pore size (curvature effect). We further show that such an effect, which arises from the fact that the surface area and, hence, the free energy of the curved gas/liquid interface decreases with increasing the film thickness, is captured using the simple thermodynamical model by Derjaguin. The effect of such a drawback on the ability of the t-plot method to estimate the micro- and mesoporous volumes of hierarchical samples is then discussed, and an abacus is given to correct the underestimated microporous volume by the t-plot method.

}, issn = {0743-7463}, doi = {10.1021/la5026679}, author = {Anne Galarneau and Fran{\c c}ois Villemot and Rodriguez, Jeremy and Fajula, Fran{\c c}ois and Benoit A. Coasne} } @article {88, title = {Water adsorption in MOFs: fundamentals and applications}, journal = {Chemical Society Reviews}, volume = {43}, year = {2014}, month = {Aug-2014}, pages = {5594-5617}, type = {Review}, abstract = {

This review article presents the fundamental and practical aspects of water adsorption in Metal\–Organic Frameworks (MOFs). The state of the art of MOF stability in water, a crucial issue to many applications in which MOFs are promising candidates, is discussed here. Stability in both gaseous (such as humid gases) and aqueous media is considered. By considering a non-exhaustive yet representative set of MOFs, the different mechanisms of water adsorption in this class of materials are presented: reversible and continuous pore filling, irreversible and discontinuous pore filling through capillary condensation, and irreversibility arising from the flexibility and possible structural modifications of the host material. Water adsorption properties of more than 60 MOF samples are reported. The applications of MOFs as materials for heat-pumps and adsorbent-based chillers and proton conductors are also reviewed. Some directions for future work are suggested as concluding remarks.

Graphical abstract: Water adsorption in MOFs: fundamentals and applications
}, issn = {0306-0012}, doi = {10.1039/c4cs00078a}, author = {Canivet, Jerome and Fateeva, Alexandra and Guo, Youmin and Benoit A. Coasne and David Farrusseng} } @article {95, title = {Adsorption, intrusion and freezing in porous silica: the view from the nanoscale}, journal = {Chemical Society Reviews}, volume = {42}, year = {2013}, month = {Jan-24-2013}, pages = {4141-4171}, type = {Review}, abstract = {

This review presents the state of the art of molecular simulation and theory of adsorption, intrusion and freezing in porous silica. Both silica pores of a simple geometry and disordered porous silicas which exhibit morphological and topological disorders are considered. We provide a brief description of the numerical models of porous silicas available in the literature and present the most common molecular simulation and theoretical methods. Adsorption in regular and irregular pores is discussed in the light of classical theories of adsorption and capillary condensation in pores. We also present the different evaporation mechanisms for disordered systems: pore blocking and cavitation. The criticality of fluids confined in pores, which is still the matter of debate, is then discussed. We review theoretical results for intrusion/extrusion and freezing in silica pores and discuss the validity of classical approaches such as the Washburn-Laplace equation and Gibbs-Thomson equation to describe the thermodynamics of intrusion and in-pore freezing. The validity of the most widely used characterization techniques is then discussed. We report some concluding remarks and suggest directions for future work.

Graphical abstract: Adsorption, intrusion and freezing in porous silica: the view from the nanoscale

}, issn = {0306-0012}, doi = {10.1039/c2cs35384a}, author = {Benoit A. Coasne and Anne Galarneau and Roland Jean-Marc Pellenq and Di Renzo, Francesco} } @article {81, title = {Adsorption-based characterization of hierarchical metal-organic frameworks}, journal = {Adsorptio-Journal of the International Adsorption Society}, volume = {20}, year = {2013}, month = {Oct-06-2013}, pages = {349-357}, type = {Article}, abstract = {

Nitrogen adsorption at 77 K on metal-organic framework (MOF) is investigated by means of molecular simulations. We consider both regular Cu-BTC crystal and a MOF-based hierarchical porous solid consisting of a mesopore carved out of a Cu-BTC crystal. The t-plot method is applied to these solids by using a non-porous Cu-BTC surface as the reference sample. The values of the mesoporous and external surface areas are determined from the t-plot, and the validity of the method for this type of hierarchical solid is discussed.

}, keywords = {Adsorption, Hierarchical porous materials, Molecular simulation, t-Plot}, issn = {0929-5607}, doi = {10.1007/s10450-013-9583-7}, author = {Fran{\c c}ois Villemot and Anne Galarneau and Benoit A. Coasne} } @proceedings {367, title = {A benchmark for particle shape dependence}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jun-18-2013}, pages = {883-886}, publisher = {AIP}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

Particle shape is a major parameter for the space-filling and strength properties of granular materials. For a systematic investigation of shape effect, a numerical benchmark test was set up within a collaborative group using different numerical methods and particles of various shape characteristics such as elongation, angularity and nonconvexity. Extensive 2D shear simulations were performed in this framework and the shear strength and packing fraction were compared for different shapes. We show that the results may be analyzed in terms of a low-order shape parameter \η describing the degree of distortion from a perfectly circular shape. In particular, the shear strength is an increasing function of \η with nearly the same trend for all shapes, the differences being of second order compared to \η. We also observe a nontrivial behavior of packing fraction which, for all our simulated shapes, increases with \η from the random close packing fraction for disks, reaches a peak considerably higher than that for disks, and subsequently declines as \η is further increased. Finally, the analysis of contact forces for the same value of \η leads to very similar statistics regardless of our specific particle shapes.

}, doi = {10.1063/1.4812073}, author = {Gael Combe and C{\'e}cile Nouguier-Lehon and Emilien Az{\'e}ma and Krzysztof Szarf and Baptiste Saint-Cyr and Marie Chaze and Farhang Radja{\"\i} and Pascal Villard and Jean-Yves Delenne and Vincent Richefeu and Philippe Sornay and Charles Voivret and CEGEO Group}, editor = {Yu, A and Dong, K and Yang, R} } @proceedings {341, title = {Granular plastic flow and fabric-based internal variables}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2013}, month = {May-2013}, pages = {3 - 19}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

A microscopic approach to the quasi-static flow of granular materials requires
fabric parameters pertaining to the contact network. We show that the plastic behavior of
granular materials is correctly predicted with the approximation of perfectly rigid particles
interacting via dissipative contacts as simulated by means of the contact dynamics method.
We investigate the correlations between macroscopic variables (internal friction angle and ...

}, isbn = {978-1-138-02707-7}, doi = {10.1201/b1739510.1201/b17395-3}, url = {http://www.crcnetbase.com/doi/book/10.1201/b17395http://www.crcnetbase.com/doi/abs/10.1201/b17395-3}, author = {Farhang Radja{\"\i} and St{\'e}phane Roux}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin and Kuo, Matthew} } @article {25, title = {Large pressure enhancements in confined phases: effect of surface chemistry and roughness}, journal = {J. Chem. Phys.}, volume = {139}, year = {2013}, month = {Oct-10-2013}, chapter = {144701}, abstract = {

Experiments and simulations both suggest that the pressure experienced by an adsorbed phase confined within a carbon nanoporous material can be several orders of magnitude larger than the bulk phase pressure in equilibrium with the system. To investigate this pressure enhancement, we report a molecular-simulation study of the pressure tensor of argon confined in slit-shaped nanopores with walls of various models, including carbon and silica materials. We show that the pressure is strongly enhanced by confinement, arising from the effect of strongly attractive wall forces; confinement within purely repulsive walls does not lead to such enhanced pressures. Simulations with both the Lennard-Jones and Barker-Fisher-Watts intermolecular potentials for argon-argon interactions give rise to similar results. We also show that an increase in the wall roughness significantly decreases the in-pore pressure due to its influence on the structure of the adsorbate. Finally, we demonstrate that the pressures calculated from the mechanical (direct pressure tensor calculations) and the thermodynamic (volume perturbation method) routes yield almost identical results, suggesting that both methods can be used to calculate the local pressure tensor components in the case of these planar geometries.

Image of FIG. 1.
Image of FIG. 2.
Image of FIG. 3.
Image of FIG. 4.
}, doi = {10.1063/1.4824125}, author = {Yun Long and Jeremy C. Palmer and Benoit A. Coasne and Malgorzata Sliwinska-Bartkowiak and George Jackson and Erich A. Mueller and Keith E. Gubbins} } @article {23, title = {Mesoscopic Monte Carlo simulations of microstructure and conductivity of zirconia-based ceramics}, journal = {J. Eur. Ceram. Soc.}, volume = {61}, year = {2013}, month = {Aug-2013}, pages = {5018-5025}, abstract = {

Zirconia-based refractories are ceramics that serve as furnaces for the production of high-quality speciality glasses. These materials are obtained by cooling a melt composed of different oxides and oxide precursors. The microstructure of these refractories consists of monoclinic zirconia embedded in a three-dimensional interconnected amorphous phase. Using mesoscopic Monte Carlo simulations, the present paper addresses the effect of the amount of amorphous phase and temperature on the microstructure of the material. The simulated microstructures resemble those obtained using tomography experiments. A theoretical model describing the electrical behavior of the material as a function of temperature and composition is also reported. In this model, the conductivity of the ZrO2 particles is assumed to be constant, but the overall conductivity of the sample depends on its tortuosity s. Comparison with experimental data suggests that the present model provides a realistic picture of the electrical behavior of zirconia-based ceramics and leads to quantitative predictions.

Image for unlabelled figure

}, doi = {10.1016/j.actamat.2013.04.044}, author = {P. Epicoco and Benoit A. Coasne and A. Gioia and P. Papet and I. Cabodi and M. Gaubil} } @article {103, title = {On the molecular origin of high-pressure effects in nanoconfinement: The role of surface chemistry and roughness}, journal = {Journal of Chemical Physics}, volume = {139}, year = {2013}, month = {Oct-14-2013}, type = {Article}, abstract = {

Experiments and simulations both suggest that the pressure experienced by an adsorbed phase confined within a carbon nanoporous material can be several orders of magnitude larger than the bulk phase pressure in equilibrium with the system. To investigate this pressure enhancement, we report a molecular-simulation study of the pressure tensor of argon confined in slit-shaped nanopores with walls of various models, including carbon and silica materials. We show that the pressure is strongly enhanced by confinement, arising from the effect of strongly attractive wall forces; confinement within purely repulsive walls does not lead to such enhanced pressures. Simulations with both the Lennard-Jones and Barker-Fisher-Watts intermolecular potentials for argon-argon interactions give rise to similar results. We also show that an increase in the wall roughness significantly decreases the in-pore pressure due to its influence on the structure of the adsorbate. Finally, we demonstrate that the pressures calculated from the mechanical (direct pressure tensor calculations) and the thermodynamic (volume perturbation method) routes yield almost identical results, suggesting that both methods can be used to calculate the local pressure tensor components in the case of these planar geometries. (C) 2013 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4824125}, author = {Yun Long and Jeremy C. Palmer and Benoit A. Coasne and Malgorzata Sliwinska-Bartkowiak and George Jackson and Erich A. Mueller and Keith E. Gubbins} } @article {34, title = {Molecular simulation of adsorption and transport in hierarchical porous materials}, journal = {Langmuir}, volume = {29}, year = {2013}, month = {May-29-2013}, pages = {7864{\textendash}7875}, abstract = {

\<\>Abstract Image

Adsorption and transport in hierarchical porous solids with micro- (\∼1 nm) and mesoporosities (\>2 nm) are investigated by molecular simulation. Two models of hierarchical solids are considered: microporous materials in which mesopores are carved out (model A) and mesoporous materials in which microporous nanoparticles are inserted (model B). Adsorption isotherms for model A can be described as a linear combination of the adsorption isotherms for pure mesoporous and microporous solids. In contrast, adsorption in model B departs from adsorption in pure microporous and mesoporous solids; the inserted microporous particles act as defects, which help nucleate the liquid phase within the mesopore and shift capillary condensation toward lower pressures. As far as transport under a pressure gradient is concerned, the flux in hierarchical materials consisting of microporous solids in which mesopores are carved out obeys the Navier\–Stokes equation so that Darcy\’s law is verified within the mesopore. Moreover, the flow in such materials is larger than in a single mesopore, due to the transfer between micropores and mesopores. This nonzero velocity at the mesopore surface implies that transport in such hierarchical materials involves slippage at the mesopore surface, although the adsorbate has a strong affinity for the surface. In contrast to model A, flux in model B is smaller than in a single mesopore, as the nanoparticles act as constrictions that hinder transport. By a subtle effect arising from fast transport in the mesopores, the presence of mesopores increases the number of molecules in the microporosity in hierarchical materials and, hence, decreases the flow in the micropores (due to mass conservation). As a result, we do not observe faster diffusion in the micropores of hierarchical materials upon flow but slower diffusion, which increases the contact time between the adsorbate and the surface of the microporosity.

}, doi = {10.1021/la401228k}, author = {Benoit A. Coasne and Anne Galarneau and Gerardin, Corine and Fajula, Fran{\c c}ois and Fran{\c c}ois Villemot} } @article {30, title = {Nanofluidic Osmotic Diodes: Theory and Molecular Dynamics Simulations}, journal = {Physical Review Letters}, volume = {111}, year = {2013}, month = {Dec-2013}, pages = {244501}, abstract = {

Osmosis describes the flow of water across semipermeable membranes powered by the chemical free energy extracted from salinity gradients. While osmosis can be expressed in simple terms via the van \’t Hoff ideal gas formula for the osmotic pressure, it is a complex phenomenon taking its roots in the subtle interactions occurring at the scale of the membrane nanopores. Here we use new opportunities offered by nanofluidic systems to create an osmotic diode exhibiting asymmetric water flow under reversal of osmotic driving. We show that a surface charge asymmetry built on a nanochannel surface leads to nonlinear couplings between water flow and the ion dynamics, which are capable of water flow rectification. This phenomenon opens new opportunities for water purification and complex flow control in nanochannels.

Figure

Figure

Figure

Figure

}, doi = {10.1103/PhysRevLett.111.244501}, author = {Picallo, Clara B and Simon Gravelle and Joly, Laurent and Charlaix, Elisabeth and Lyd{\'e}ric Bocquet} } @article {279, title = {Nano-mechanical properties of starch and gluten biopolymers from atomic force microscopy}, journal = {European Polymer Journal}, volume = {49}, year = {2013}, month = {Dec-2013}, pages = {3788 - 3795}, abstract = {

An original method based on atomic force microscopy (AFM) in contact mode was developed to abrade progressively the surface of tablets made of starch or gluten polymers isolated from wheat. The volume of the material removed by the tip was estimated from the analysis of successive topographic images of the surface, and the shear force was measured by keeping a constant normal force. Our data together with a simple tribological model provide clear evidence for a higher hardness and shear strength of starch compared to gluten. Gluten appears to have mechanical properties close to soft materials, such as talc, whereas starch displays higher hardness close to calcite. Our results are in a better agreement with structural properties of gluten (complex protein network) and starch (granular and semi-cristalline structure) than earlier studies by micro-indentation. This work shows that the AFM scratching method is relevant for the characterization of any polymer surface, in particular in application to materials made of different polymers at the nano-scale.

Graphical abstract

Unlabelled figure
}, issn = {00143057}, doi = {10.1016/j.eurpolymj.2013.08.024}, author = {Chichti, Emna and George, Matthieu and Jean-Yves Delenne and Farhang Radja{\"\i} and Val{\'e}rie Lullien-Pellerina} } @article {66, title = {Optimizing water permeability through the hourglass shape of aquaporins}, journal = {Proceedings of the National Academy of Sciences}, volume = {110}, year = {2013}, month = {Oct-08-2013}, pages = {16367{\textendash}16372}, abstract = {

The ubiquitous aquaporin channels are able to conduct water across cell membranes, combining the seemingly antagonist functions of a very high selectivity with a remarkable permeability. Whereas molecular details are obvious keys to perform these tasks, the overall efficiency of transport in such nanopores is also strongly limited by viscous dissipation arising at the connection between the nanoconstriction and the nearby bulk reservoirs. In this contribution, we focus on these so-called entrance effects and specifically examine whether the characteristic hourglass shape of aquaporins may arise from a geometrical optimum for such hydrodynamic dissipation. Using a combination of finite-element calculations and analytical modeling, we show that conical entrances with suitable opening angle can indeed provide a large increase of the overall channel permeability. Moreover, the optimal opening angles that maximize the permeability are found to compare well with the angles measured in a large variety of aquaporins. This suggests that the hourglass shape of aquaporins could be the result of a natural selection process toward optimal hydrodynamic transport. Finally, in a biomimetic perspective, these results provide guidelines to design artificial nanopores with optimal performances.

}, doi = {10.1073/pnas.1306447110}, author = {Simon Gravelle and Joly, Laurent and Detcheverry, Fran{\c c}ois and Christophe Ybert and Cottin-Bizonne, C{\'e}cile and Lyd{\'e}ric Bocquet} } @proceedings {354, title = {Microscopic Origins of Shear Strength in Packings Composed of Elongated Particles}, journal = {9th International Workshop on Bifurcation and Degradation in Geomaterials (IWBDG 2011)}, volume = {Springer Series in Geomechanics and Geoengineering - ADVANCES IN BIFURCATION AND DEGRADATION IN GEOMATERIALS}, year = {2012}, month = {Apr-11-2012}, pages = {21-27}, address = {MAY 23-26 2011 Porquerolles, FRANCE}, abstract = {

We investigate the rheology, force transmission and texture of granular materials composed of elongated particles by means of contact dynamics simulations. The particles have a rounded-cap rectangular (RCR) shape described by a single elongation parameter varying from 0 for a circular particle to 1 for an infinitely thin or long particle. We study the quasi-static behavior, structural and force anisotropies as a function of the elongation parameter for packings submitted to biaxial compression. The shear strength is found to increase linearly with this parameter whereas the solid fraction both at the initial isotropic state and in the critical state is nonmonotonous. We show that for these elongated particles a harmonic decomposition of the stress tensor provides a fairly good approximation of the internal state. Our data suggest that the increase of shear strength with reflects both enhanced friction mobilization and anisotropic particle orientation as the elongation of the particles increases.

}, keywords = {Elongated particles, Fabric properties, force transmission, Harmonic decomposition}, url = {https://hal.archives-ouvertes.fr/hal-00686728}, author = {Emilien Az{\'e}ma and Farhang Radja{\"\i}}, editor = {St{\'e}phane Bonelli and Dascalu, Cristian and Fran{\c c}ois Nicot} } @article {53, title = {Set in stone? A perspective on the concrete sustainability challenge}, journal = {MRS bulletin}, volume = {37}, year = {2012}, month = {Apr-09-2012}, pages = {395{\textendash}402}, abstract = {

As the most abundant engineered material on Earth, concrete is essential to the physical infrastructure of all modern societies. There are no known materials that can replace concrete in terms of cost and availability. There are, however, environmental concerns, including the significant CO2 emissions associated with cement production, which create new incentives for university\–industry collaboration to address concrete sustainability. Herein, we examine one aspect of this challenge\—the translation of scientific understanding at the microscale into industrial innovation at the macroscale\—by seeking improvements in cement-paste processing, performance, and sustainability through control of the mechanisms that govern microstructure development. Specifically, we consider modeling, simulation, and experimental advances in fracture, dissolution, precipitation, and hydration of cement paste precursors, as well as properties of the hardened cement paste within concrete. The aim of such studies is to optimize the chemical reactivity, mechanical performance, and other physical properties of cement paste to enable more sustainable processing routes for this ubiquitous material.

}, doi = {10.1557/mrs.2012.55}, author = {Krystyn J. Van Vliet and Roland Jean-Marc Pellenq and Markus J Buehler and Jeffrey C Grossman and Hamlin M. Jennings and Franz-Josef Ulm and Sidney Yip} } @article {55, title = {Understanding and Controlling the Reactivity of the Calcium Silicate phases from First Principles}, journal = {Chemistry of Materials}, volume = {24}, year = {2012}, month = {Apr-10-2012}, pages = {1262{\textendash}1267}, abstract = {
Abstract Image

First principles calculations are employed to provide a fundamental understanding of the relationship between the reactivity of synthetic calcium silicate phases and their electronic structure. Our aim is to shed light on the wide range of hydration kinetics observed in different phases of calcium silicate. For example, while the dicalcium silicate (Ca2SiO4) phase slowly reacts with water, the tricalcium silicate (Ca3SiO5) shows much faster hydration kinetics. We show that the high reactivity of Ca3SiO5 is mainly related to the reactive sites around its more ionic oxygen atoms. Ca2SiO4 does not contain these types of oxygen atoms, although experiments suggest that impurities may play a role in changing the reactivity of these materials. We analyze the electronic structure of a wide range of possible substitutions in both Ca3SiO5 and Ca2SiO4 and show that while the influence of different types of impurities on structural properties is similar, their effect on reactivity is very different. Our calculations suggest that the variation of electronic structure is mainly related to the formation of new hybridized orbitals and the charge exchange between the impurity atoms and the bulk material. The charge localization upon introducing impurities is quantified to predict candidate substitutions that could increase the reactivity of Ca2SiO4, which would broaden the applicability of this lower temperature and thus less costly and energetically less demanding phase.

}, doi = {10.1021/cm203127m}, author = {Engin Durgun and Hegoi Manzano and Roland Jean-Marc Pellenq and Jeffrey C Grossman} } @article {298, title = {Use of UHPC in Bridge Structures: Material Modeling and Design}, journal = {Advances in Materials Science and Engineering}, year = {2012}, month = {Feb-11-2012}, pages = {Article Number: 319285}, abstract = {

Ultra-high-performance concrete (UHPC) is a promising new class of concrete material that is likely to make a significant contribution to addressing the challenges associated with the load capacity, durability, sustainability, economy, and environmental impact of concrete bridge infrastructures. This paper focuses on the material modeling of UHPC and design of bridge girders made of UHPC. A two-phase model used for modeling the behavior of UHPC was briefly discussed, and the model was implemented in a preliminary design case study. Based on the implemented design and the reported use of UHPC in bridge applications, the advantages, limitations, and future prospects of UHPC bridges were discussed, highlighting the need for innovative research and design to make optimum use of the favorable properties of the material in bridge structures.

}, issn = {1687-8434}, doi = {10.1155/2012/319285}, author = {Gunes, Oguz and Yesilmen, Seda and Gunes, Burcu and Franz-Josef Ulm} } @proceedings {356, title = {Compressive strength of an unsaturated granular material during cementation}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {308 - 311}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

The cohesive behaviour of unsaturated granular materials is due to the presence of cohesive bonds between grains. These bonds can have various physico-chemical characteristics and may evolve with environmental conditions. We study the case of a granular material partially saturated by an aqueous solution. The bonds are thus initially of capillary type and the mechanical strength is weak. At low relative humidity, the phase change of water involves crystallization of the solute at the contact points between grains, generating thus solid bonds. The mechanical strength of the material is then enhanced. An experimental study of the evolution of the mechanical strength during crystallization of the solute shows clearly the transition from capillary regime to cemented regime. This transition is not correlated with the mass of the crystallized solute, but rather with the residual degree of saturation. This behavior is analyzed here in the light of discrete element simulations. We introduce a local cohesion law that accounts for transition from capillary to cemented bonding. This law is formulated in terms of the degree of crystallization as a result of the evaporation of water at the boundary of the sample. The cohesion of the packing is initially of capillary type. A crystallization front then spreads from the sample boundaries to the center of the sample, and the strength increases as a result. Uniaxial compression allows us to determine the strength at different times. The numerical strength agrees well with the experimental data, and reveals strength enhancement as the solute crystallizes, as well as the transition from capillary to cementation regime.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.021}, author = {Jean-Yves Delenne and Souli{\'e}, Fabien and Moulay Sa{\"\i}d El Youssoufi and Farhang Radja{\"\i}} } @article {291, title = {Impact of Chemical Impurities on the Crystalline Cement Clinker Phases Determined by Atomistic Simulations}, journal = {Crystal Growth \& Design}, volume = {11}, year = {2011}, month = {Jul-2011}, pages = {2964 - 2972}, abstract = {
Abstract Image

The presence of chemical substitutions is believed to play a crucial role in the hydration reactions, structure, and elastic properties of cement clinker phases. Hence, substitutions are of great technological interest, as more efficient production of cement clinkers would result in a reduction of CO2 emissions, as well as possible economic benefits. Here we use a combination of classical and quantum mechanical simulation methods to study the detailed physicochemical changes of the clinker phases alite (Ca3SiO5) and belite (Ca2SiO4) when Mg2+, Al3+ and Fe3+ guest ions are incorporated into their structure. Using classical force field methods, we considered random substitutions among possible sites and different compositions in order to identify the preferential substitution sites on the crystalline structures. Then, the resulting structural changes that take place to accommodate the guest ions are investigated and discussed in detail. Using quantum mechanical density functional theory calculations the electronic structure of representative configurations has been computed to determine the potential impact of impurities on the reactivity.

}, issn = {1528-7483}, doi = {10.1021/cg200212c}, author = {Hegoi Manzano and Engin Durgun and Mohammad Javad Abdolhosseini Qomi and Franz-Josef Ulm and Roland Jean-Marc Pellenq and Jeffrey C Grossman} } @proceedings {352, title = {Modeling Porous Granular Aggregates}, journal = {9th International Workshop on Buifurcation and Degradation in Geomaterials (IWBDG 2011)}, volume = {Springer Series in Geomechanics and Geoengineering - ADVANCES IN BIFURCATION AND DEGRADATION IN GEOMATERIALS}, year = {2011}, month = {May-28-2011}, pages = {249 - 254}, publisher = {Springer Netherlands}, address = {MAY 23-26 2011 Porquerolles, FRANCE}, abstract = {

We rely on 3D simulations based on the Lattice Element Method (LEM) to analyze the failure of porous granular aggregates under tensile loading. We investigate crack growth by considering the number of broken bonds in the particle phase as a function of the matrix volume fraction and particle-matrix adhesion. Three regimes are evidenced, corresponding to no particle damage, particle abrasion and particle fragmentation, respectively. We also show that the probability density of strong stresses falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. Decreasing the matrix volume fraction leads to increasingly broader stress distribution and hence a higher stress concentration. Our findings are in agreement with 2D results previously reported in the literature.

}, isbn = {978-94-007-1420-5}, issn = {1866-8755}, doi = {10.1007/978-94-007-1421-2_32}, author = {Rafik Aff{\`e}s and Vincent Topin and Jean-Yves Delenne and Yann Monerie}, editor = {St{\'e}phane Bonelli and Dascalu, Cristian and Fran{\c c}ois Nicot} } @article {258, title = {The nanogranular origin of friction and cohesion in shale-A strength homogenization approach to interpretation of nanoindentation results}, journal = {International Journal for Numerical and Analytical Methods in Geomechanics}, volume = {35}, year = {2011}, month = {Dec-10-2011}, pages = {1854 - 1876}, abstract = {

An inverse micromechanics approach allows interpretation of nanoindentation results to deliver cohesive-frictional strength behavior of the porous clay binder phase in shale. A recently developed strength homogenization model, using the Linear Comparison Composite approach, considers porous clay as a granular material with a cohesive-frictional solid phase. This strength homogenization model is employed in a Limit Analysis Solver to study indentation hardness responses and develop scaling relationships for indentation hardness with clay packing density. Using an inverse approach for nanoindentation on a variety of shale materials gives estimates of packing density distributions within each shale and demonstrates that there exists shale-independent scaling relations of the cohesion and of the friction coefficient that vary with clay packing density. It is observed that the friction coefficient, which may be interpreted as a degree of pressure-sensitivity in strength, tends to zero as clay packing density increases to one. In contrast, cohesion reaches its highest value as clay packing density increases to one. The physical origins of these phenomena are discussed, and related to fractal packing of these nanogranular materials. Copyright \© 2010 John Wiley \& Sons, Ltd.

}, doi = {10.1002/nag.v35.1710.1002/nag.984}, author = {Bobko, Christopher P. and Gathier, Benjamin and J. Alberto Ortega and Franz-Josef Ulm and Borges, Lavinia and Younane N. Abousleiman} } @proceedings {347, title = {STRENGTH HOMOGENIZATION FOR COHESIVE-FRICTIONAL COMPOSITES: A LINEAR COMPARISON COMPOSITE APPROACH}, journal = {International Workshop on Multiscale and Multiphysics Processes in Geomechanics}, volume = {Springer Series in Geomechanics and Geoengineering}, year = {2011}, month = {Jan-2011}, pages = {57 - 60}, publisher = {Springer Berlin Heidelberg}, address = {JUN 23-25 2010 Stanford Univ, Stanford, CA}, abstract = {

In this work, we address the homogenization of cohesive-frictional strength properties of composite materials through the application of the Linear Comparison Composite (LCC) theory. The LCC methodology is implemented in a multiscale strength model relevant to geomaterials with heterogeneities associated with pore spaces and rigid-like grains. The proposed micromechanics solutions offer quantitative assessments of the effects of grain-scale properties and microstructure on the overall strength of the composite material Keywordscohesive-frictional materials\–linear comparison composite

}, isbn = {978-3-642-19629-4}, issn = {1866-8755}, doi = {10.1007/978-3-642-19630-0_15}, author = {J. Alberto Ortega and Gathier, Benjamin and Franz-Josef Ulm}, editor = {Wu, Wei and Borja, Ronaldo I.} } @proceedings {355, title = {Stress fields in granular solids: Effect of composition}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {568 - 573}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

We use the lattice element method to investigate stress fields at the sub-particle scale in granular solids composed of particles embedded in a cementing matrix. The stress distributions are found to be similar in 2D and 3D samples subjected to vertical loading with free lateral boundaries. We find that the number of strong forces falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. The influence of the matrix volume fraction and particle/matrix stiffness ratio with respect to stress distribution is analyzed in 2D and 3D. We show that both decreasing the matrix volume fraction and increasing the stiffness ratio lead to increasingly broader distributions within a limit beyond which the distribution is independent of one or both of these parameters.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.060}, author = {Vincent Topin and Farhang Radja{\"\i} and Jean-Yves Delenne} }