@article {657, title = {Bilirubin oxidase-based silica macrocellular robust catalyst for on line dyes degradation}, journal = {Enzyme and Microbial Technology}, volume = {120}, year = {2019}, month = {Jan-01-2019}, pages = {77 - 83}, abstract = {

We present a new heterogeneous biocatalyst based on the grafting of Bilirubin Oxidase from Bacillus pumilus into macrocellular Si(HIPE) materials dedicated to water treatment. Due to the host intrinsic high porosity and monolithic character, on-line catalytic process is reached. We thus used this biocatalyst toward uni-axial flux decolorization of Congo Red and Remazol Brilliant Blue (RBBR) at two different pH (4 and 8.2), both in presence or absence of redox mediator. In absence of redox mediators, 40\% decolorization efficiency was reached within 24 h at pH 4 for Congo Red and 80\% for RBBR at pH 8.2 in 24 h. In presence of 10 mu M ABTS, it respectively attained 100\% efficiency after 2h and 12h. We have also demonstrated that non-toxic species were generated upon dyes decolorization. These results show that unlike laccases, this new biocatalyst exhibits excellent decolorization properties over a wide range of pH. Beyond, this enzymatic-based heterogeneous catalyst can be reused during two months being simply stored at room temperature while maintaining its decolorization efficiency. This study shows that this biocatalyst is a promising and robust candidate toward wastewater treatments, both in acidic and alkaline conditions where in the latter efficient decolorization strategies were still missing.

}, issn = {01410229}, doi = {10.1016/j.enzmictec.2018.10.004}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0141022918303466}, author = {Roucher, Armand and Roussarie, Elodie and Gauvin, R{\'e}gis M. and Rouhana, Jad and Gounel, S{\'e}bastien and Stines-Chaumeil, Claire and Mano, Nicolas and Backov, Renal} } @article {665, title = {Cutting floating single-walled carbon nanotubes with a {\textquoteleft}CO2 blade{\textquoteright}}, journal = {Carbon}, volume = {143}, year = {2019}, month = {Mar-2019}, pages = {481 - 486}, abstract = {

Uniform ultra-short (\< 100 nm) single-walled carbon nanotubes (SWCNTs) with properties of rich chemistry, high dispersity and easy manipulation, are of great importance for constructing novel nanostructures and highly integrated miniature devices. Herein, we report a recent breakthrough in cutting long SWCNTs into uniform ultra-short segments in gas-phase using CO2 as a \&$\#$39;blade.\&$\#$39; SWCNTs synthesized by an aerosol reactor are directly introduced into a second reactor for gaseous cutting. The quality and the number concentration of shortened SWCNTs are enhanced after the gas-phase cutting process. Moreover, the growth and cutting of SWCNTs are accomplished in a continuous gas-phase process, thus allows direct dry deposition of ultra-short SWCNTs as individual macromolecules or thin films onto various substrates for multiple applications. (C) 2018 Elsevier Ltd. All rights reserved.

}, issn = {00086223}, doi = {10.1016/j.carbon.2018.11.035}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0008622318310558}, author = {Tian, Ying and Wei, Nan and Laiho, Patrik and Ahmad, Saeed and Yann Magnin and Liao, Yongping and Christophe Bichara and Jiang, Hua and Kauppinen, Esko I.} } @article {668, title = {Spontaneous rotation can stabilise ordered chiral active fluids}, journal = {Nature Communications}, volume = {10}, year = {2019}, month = {Feb-22-2019}, pages = { Article Number: 920 }, abstract = {

Active hydrodynamic theories are a powerful tool to study the emergent ordered phases of internally driven particles such as bird flocks, bacterial suspension and their artificial analogues. While theories of orientationally ordered phases are by now well established, the effect of chirality on these phases is much less studied. In this paper, we present a complete dynamical theory of orientationally ordered chiral particles in two-dimensional incompressible systems. We show that phase-coherent states of rotating chiral particles are remarkably stable in both momentum-conserved and non-conserved systems in contrast to their non-rotating counterparts. Furthermore, defect separation-which drives chaotic flows in non-rotating active fluids-is suppressed by intrinsic rotation of chiral active particles. We thus establish chirality as a source of dramatic stabilisation in active systems, which could be key in interpreting the collective behaviors of some biological tissues, cytoskeletal systems and collections of bacteria.

}, doi = {10.1038/s41467-019-08914-7}, url = {http://www.nature.com/articles/s41467-019-08914-7}, author = {Maitra, Ananyo and Lenz, Martin} } @article {579, title = {Computing the linear viscoelastic properties of soft gels using an optimally windowed chirp protocol}, journal = {Journal of Rheology}, volume = {62}, year = {2018}, month = {Jul-2018}, pages = {1037 - 1050}, abstract = {

We use molecular dynamics simulations to investigate the linear viscoelastic response of a model three-dimensional particulate gel. The numerical simulations are combined with a novel test protocol (the optimally windowed chirp or OWCh), in which a continuous exponentially varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that (i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and (ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous damping and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By developing a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path toward novel multiscale insight into the rheological response for such complex materials. (C) 2018 The Society of Rheology.

}, issn = {0148-6055}, doi = {10.1122/1.5018715}, url = {http://sor.scitation.org/doi/10.1122/1.5018715}, author = {Bouzid, Mehdi and Keshavarz, Bavand and Geri, Michela and Divoux, Thibaut and Emanuela Del Gado and McKinley, Gareth H.} } @article {577, title = {Entropy-driven stability of chiral single-walled carbon nanotubes}, journal = {Science}, volume = {362}, year = {2018}, month = {Oct-12-2018}, pages = {212 - 215}, abstract = {

Single-walled carbon nanotubes are hollow cylinders that can grow centimeters long via carbon incorporation at the interface with a catalyst. They display semiconducting or metallic characteristics, depending on their helicity, which is determined during their growth. To support the quest for a selective synthesis, we develop a thermodynamic model that relates the tube-catalyst interfacial energies, temperature, and the resulting tube chirality. We show that nanotubes can grow chiral because of the configurational entropy of their nanometer-sized edge, thus explaining experimentally observed temperature evolutions of chiral distributions. Taking the chemical nature of the catalyst into account through interfacial energies, we derive structural maps and phase diagrams that will guide a rational choice of a catalyst and growth parameters toward a better selectivity.

}, issn = {0036-8075}, doi = {10.1126/science.aat6228}, url = {http://www.sciencemag.org/lookup/doi/10.1126/science.aat6228}, author = {Yann Magnin and Amara, Hakim and Ducastelle, Francois and Loiseau, Annick and Christophe Bichara} } @article {580, title = {Improving the practicality and safety of artificial corneas: Pre-assembly and gamma-rays sterilization of the Boston Keratoprosthesis}, journal = {The Ocular Surface}, volume = {16}, year = {2018}, month = {Jul-2018}, pages = {322 - 330}, abstract = {

Purpose: To make the Boston keratoprosthesis (B-KPro), together with its carrier corneal graft, more easily procured, transported and stored, as well as less expensive, easier for the surgeon to implant and safer for the patient, it is proposed that the B-KPro-graft combination be pre-assembled by an expert technician, followed by sterilization with gamma ray irradiation (GI) allowing long-term storage at room temperature. For this to be possible, it must be shown that the B-KPro itself (not only the graft) remains unharmed by the irradiation.

Methods: Polymethyl methacrylate (PMMA) discs and B-KPros were submitted to either ethylene oxide sterilization or different doses of GI. Cell biocompatibility, mechanical strength and optical quality were evaluated. The feasibility of assembling the B-KPro to a corneal graft, and gamma-radiate afterwards, was also assessed.

Results: There were no differences in cell biocompatibility between the samples. The optical evaluation showed high levels of transparency for all the groups. The absorbance of ultraviolet was higher for the groups treated with GI. The mechanical evaluation by nanoindentation showed no alterations of the PMMA discs after GI. The flexure test revealed a similar mechanical behavior. Technically, pre-assembly and GI of the B-KPro revealed no problems.

Conclusions: Sterilization of B-KPro using GI has no detrimental influence on the device. The pre-assembly of B-KPro to a donor cornea, followed by gamma sterilization, emerges as an efficient and safe procedure. (C) 2018 Elsevier Inc. All rights reserved.

}, keywords = {Artificial corneas; Boston keratoprosthesis; Gamma radiation; Gamma rays; Preassembly; Sterilization; Polymethyl methacrylate}, issn = {15420124}, doi = {10.1016/j.jtos.2018.04.002}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1542012418300442}, author = {Gonzalez-Andrades, Miguel and Sharifi, Roholah and Islam, Mohammad Mirazul and Divoux, Thibaut and Haist, Michael and Paschalis, Eleftherios I. and Gelfand, Larisa and Mamodaly, Shamina and Di Cecilia, Luca and Cruzat, Andrea and Franz-Josef Ulm and Chodosh, James and Delori, Francois and Dohlman, Claes H.} } @article {533, title = {Mechanical strength of wet particle agglomerates}, journal = {Mechanics Research Communications}, volume = {92}, year = {2018}, month = {Sep-2018}, pages = {1 - 7}, abstract = {

Using particle dynamics simulations, we investigate the strength and microstructure of agglomerates of wet frictional particles subjected to axial compression. The numerical model accounts for the cohesive and viscous effects of the binding liquid up to a debonding distance with the liquid assumed to be distributed homogeneously inside the agglomerate. We show that wet agglomerates undergo plastic deformation due to the rearrangements of primary particles during compression. The compressive strength is thus characterized by the plastic threshold before the onset of failure by the irreversible loss of wet contacts between primary particles. We find that the agglomerate plastic threshold is proportional to the characteristic cohesive stress defined from the liquid-vapor surface tension and the mean diameter of primary particles, with a prefactor that is a nearly linear function of the debonding distance and increases with size span. We analyze the agglomerate microstructure and, considering only the cohesive capillary forces at all bonds between primary particles, we propose an expression of the plastic strength as a function of the texture parameters such as the wet coordination number and packing fraction. This expression is shown to be consistent with our simulations up to a multiplicative factor reflecting the distribution of the capillary bridges. (C) 2018 Published by Elsevier Ltd.

Fig. 1. Schematic drawing of the forces acting on particle i by a contacting particle j{\textellipsis}

Fig. 2. Schematic representation of diametrical compression test (a), and snapshots of{\textellipsis}

Fig. 3. Snapshot of a granule under diametrical compression for α=1

Fig. 4. Vertical strength σzz normalized by the reference stress σc for different{\textellipsis}

Fig. 5. Normalized plastic strength of the granule for several values of the debonding{\textellipsis}

Fig. 6. Normalized plastic strength σp/σc of the granules for different values of the{\textellipsis}

Fig. 7. The initial wet coordination number Z0 of the granules for different values of{\textellipsis}

Fig. 8. The prefactor η in Eq

Fig. 9. The ZΦs in Eq

}, issn = {00936413}, doi = {10.1016/j.mechrescom.2018.07.003}, url = {https://www-sciencedirect-com.libproxy.mit.edu/science/article/pii/S0093641318301216}, author = {Vo, Thanh-Trung and Patrick Mutabaruka and Saeid Nezamabadi and Jean-Yves Delenne and Izard, Edouard and Roland Jean-Marc Pellenq and Farhang Radja{\"\i}} } @article {658, title = {A methodology to calibrate and to validate effective solid potentials of heterogeneous porous media from computed tomography scans and laboratory-measured nanoindentation data}, journal = {Acta Geotechnica}, volume = {13}, year = {2018}, month = {Jan-12-2018}, pages = {1369 - 1394}, abstract = {

Built on the framework of effective interaction potentials using lattice element method, a methodology to calibrate and to validate the elasticity of solid constituents in heterogeneous porous media from experimentally measured nanoindentation moduli and imported scans from advanced imaging techniques is presented. Applied to computed tomography (CT) scans of two organic-rich shales, spatial variations of effective interaction potentials prove instrumental in capturing the effective elastic behavior of highly heterogeneous materials via the first two cumulants of experimentally measured distributions of nanoindentation moduli. After calibration and validation steps while implicitly accounting for mesoscale texture effects via CT scans, Biot poroelastic coefficients are simulated. Analysis of stress percolation suggests contrasting pathways for load transmission, a reflection of microtextural differences in the studied cases. This methodology to calibrate elastic energy content of real materials from advanced imaging techniques and experimental measurements paves the way to study other phenomena such as wave propagation and fracture while providing a platform to fine-tune effective behavior of materials given advancements in additive manufacturing and machine learning algorithms .

}, issn = {1861-1125}, doi = {10.1007/s11440-018-0687-9}, url = {http://link.springer.com/10.1007/s11440-018-0687-9}, author = {Monfared, Siavash and Hadrien Laubie and Farhang Radja{\"\i} and Hubler, Mija H. and Roland Jean-Marc Pellenq and Franz-Josef Ulm} } @article {610, title = {A minimal power model for human running performance}, journal = {PLOS ONE}, volume = {13}, year = {2018}, month = {Nov-16-2018}, pages = {e0206645}, abstract = {

Models for human running performances of various complexities and underlying principles have been proposed, often combining data from world record performances and bio-energetic facts of human physiology. The purpose of this work is to develop a novel, minimal and universal model for human running performance that employs a relative metabolic power scale. The main component is a self-consistency relation for the time dependent maximal power output. The analytic approach presented here is the first to derive the observed logarithmic scaling between world (and other) record running speeds and times from basic principles of metabolic power supply. Our hypothesis is that various female and male record performances (world, national) and also personal best performances of individual runners for distances from 800m to the marathon are excellently described by this model. Indeed, we confirm this hypothesis with mean errors of (often much) less than 1\%. The model defines endurance in a way that demonstrates symmetry between long and short racing events that are separated by a characteristic time scale comparable to the time over which a runner can sustain maximal oxygen uptake. As an application of our model, we derive personalized characteristic race speeds for different durations and distances.

}, keywords = {ENERGY-COST; OXYGEN-UPTAKE; ATHLETIC RECORDS; ECONOMY; RUNNERS; RUN; ENDURANCE; MARATHON; EXERCISE; EXHAUSTION}, doi = {10.1371/journal.pone.0206645}, url = {http://dx.plos.org/10.1371/journal.pone.0206645}, author = {Mulligan, Matthew and Adam, Guillaume and Emig, Thorsten}, editor = {Piknova, Barbora} } @article {627, title = {Multiscale modeling for bioresources and bioproducts}, journal = {Innovative Food Science \& Emerging Technologies}, volume = {46}, year = {2018}, month = {Avr-2018}, pages = {41 - 53}, abstract = {

Designing and processing complex matter and materials are key objectives of bioresource and bioproduct research. Modeling approaches targeting such systems have to account for their two main sources of complexity: their intrinsic multi-scale nature; and the variability and heterogeneity inherent to all living systems. Here we provide insight into methods developed at the Food \& Bioproduct Engineering division (CEPIA) of the French National Institute of Agricultural Research (INRA). This brief survey focuses on innovative research lines that tackle complexity by mobilizing different approaches with complementary objectives. On one hand cognitive approaches aim to uncover the basic mechanisms and laws underlying the emerging collective properties and macroscopic behavior of soft-matter and granular systems, using numerical and experimental methods borrowed from physics and mechanics. The corresponding case studies are dedicated to the structuring and phase behavior of biopolymers, powders and granular materials, and to the evolution of these structures caused by external constraints. On the other hand machine learning approaches can deal with process optimizations and outcome predictions by extracting useful information and correlations from huge datasets built from experiments at different length scales and in heterogeneous conditions. These predictive methods are illustrated in the context of cheese ripening, grape maturity prediction and bacterial production.

}, issn = {14668564}, doi = {10.1016/j.ifset.2017.09.015}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1466856417302230}, author = {Barnabe, M. and Blanc, Nicolas and Chabin, T. and Jean-Yves Delenne and Duri, A. and Frank, Xavier and Hugouvieux, V. and Lutton, E. and Mabille, F. and Saeid Nezamabadi and Perrot, N. and Farhang Radja{\"\i} and Ruiz, T. and Tonda, A.} } @article {631, title = {A nonequilibrium force can stabilize 2D active nematics}, journal = {Proceedings of the National Academy of Sciences}, volume = {115}, year = {2018}, month = {Jul-03-2018}, pages = {6934-6939}, abstract = {

Suspensions of actively driven anisotropic objects exhibit distinctively nonequilibrium behaviors, and current theories predict that they are incapable of sustaining orientational order at high activity. By contrast, here we show that nematic suspensions on a substrate can display order at arbitrarily high activity due to a previously unreported, potentially stabilizing active force. This force moreover emerges inevitably in theories of active orientable fluids under geometric confinement. The resulting nonequilibrium ordered phase displays robust giant number fluctuations that cannot be suppressed even by an incompressible solvent. Our results apply to virtually all experimental assays used to investigate the active nematic ordering of self-propelled colloids, bacterial suspensions, and the cytoskeleton and have testable implications in interpreting their nonequilibrium behaviors.

}, issn = {0027-8424}, doi = {10.1073/pnas.1720607115}, url = {http://www.pnas.org/lookup/doi/10.1073/pnas.1720607115}, author = {Maitra, Ananyo and Srivastava, Pragya and Marchetti, M. Cristina and Lintuvuori, Juho S. and Ramaswamy, Sriram and Lenz, Martin} } @article {629, title = {Time-Resolved Mechanical Spectroscopy of Soft Materials via Optimally Windowed Chirps}, journal = {Physical Review X}, volume = {8}, year = {2018}, month = {Dec-06-2018}, pages = {Article Number 041042 }, abstract = {

The ability to measure the bulk dynamic behavior of soft materials with combined time and frequency resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domains, mainly due to the use of elementary input signals that have not been designed for fast time-evolving systems such as materials undergoing gelation, curing, or self-healing. In this work, we develop an optimized and robust excitation signal for time-resolved mechanical spectroscopy through the introduction of joint frequency- and amplitude-modulated exponential chirps. Inspired by the biosonar signals of bats and dolphins, we optimize the signal profile to maximize the signal-to-noise ratio while minimizing spectral leakage with a carefully designed modulation of the envelope of the chirp, obtained using a cosine-tapered window function. A combined experimental and numerical investigation reveals that there exists an optimal range of window profiles (around 10\% of the total signal length) that minimizes the error with respect to standard single-frequency sweep techniques. The minimum error is set by the noise floor of the instrument, suggesting that the accuracy of an optimally windowed-chirp (OWCh) sequence is directly comparable to that achievable with a standard frequency sweep, while the acquisition time can be reduced by up to 2 orders of magnitude, for comparable spectral content. Finally, we demonstrate the ability of this optimized signal to provide time- and frequency-resolved rheometric data by studying the fast gelation process of an acid-induced protein gel using repeated OWCh pulse sequences. The use of optimally windowed chirps enables a robust time-resolved rheological characterization of a wide range of soft materials undergoing rapid mutation and has the potential to become an invaluable rheometric tool for researchers across different disciplines.

}, doi = {10.1103/PhysRevX.8.041042}, url = {https://link.aps.org/doi/10.1103/PhysRevX.8.041042}, author = {Geri, Michela and Keshavarz, Bavand and Divoux, Thibaut and Clasen, Christian and Curtis, Daniel J. and McKinley, Gareth H.} } @article {624, title = {Accurate classical short-range forces for the study of collision cascades in Fe{\textendash}Ni{\textendash}Cr}, journal = {Computer Physics Communications}, volume = {219}, year = {2017}, month = {Oct-2017}, pages = {11 - 19}, abstract = {

The predictive power of a classical molecular dynamics simulation is largely determined by the physical validity of its underlying empirical potential. In the case of high-energy collision cascades, it was recently shown that correctly modeling interactions at short distances is necessary to accurately predict primary damage production. An ab initio based framework is introduced for modifying an existing embedded-atom method FeNiCr potential to handle these short-range interactions. Density functional theory is used to calculate the energetics of two atoms approaching each other, embedded in the alloy, and to calculate the equation of state of the alloy as it is compressed. The pairwise terms and the embedding terms of the potential are modified in accordance with the ab initio results. Using this reparametrized potential, collision cascades are performed in Ni50Fe50, Ni80Cr20 and Ni33Fe33Cr33. The simulations reveal that alloying Ni and NiCr to Fe reduces primary damage production, in agreement with some previous calculations. Alloying Ni and NiFe to Cr does not reduce primary damage production, in contradiction with previous calculations.

}, issn = {00104655}, doi = {10.1016/j.cpc.2017.05.001}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0010465517301315}, author = {B{\'e}land, Laurent Karim and Tamm, Artur and Mu, Sai and Samolyuk, D. and Osetsky, N. and Aabloo, Alvo and Klintenberg, Mattias and Caro, Alfredo and Stoller, E.} } @article {239, title = {Disorder-induced stiffness degradation of highly disordered porous materials}, journal = {Journal of the Mechanics and Physics of Solids}, volume = {106}, year = {2017}, month = {Sep-2017}, chapter = {207-228}, abstract = {

The effective mechanical behavior of multiphase solid materials is generally modeled by means of homogenization techniques that account for phase volume fractions and elastic moduli without considering the spatial distribution of the different phases. By means of extensive numerical simulations of randomly generated porous materials using the lattice element method, the role of local textural properties on the effective elastic properties of disordered porous materials is investigated and compared with different continuum micromechanics-based models. It is found that the pronounced disorder-induced stiffness degradation originates from stress concentrations around pore clusters in highly disordered porous materials. We identify a single disorder parameter, \φsa, which combines a measure of the spatial disorder of pores (the clustering index, sa) with the pore volume fraction (the porosity, \φ) to scale the disorder-induced stiffness degradation. Thus, we conclude that the classical continuum micromechanics models with one spherical pore phase, due to their underlying homogeneity assumption fall short of addressing the clustering effect, unless additional texture information is introduced, e.g. in form of the shift of the percolation threshold with disorder, or other functional relations between volume fractions and spatial disorder; as illustrated herein for a differential scheme model representative of a two-phase (solid\–pore) composite model material.

Fig. 1. Two-dimensional porous media: (a) ordered system, (b) type 1 disorder (pores{\textellipsis}

Fig. 2. Two-point probability functions and associated microstructures of four systems{\textellipsis}

Fig. 3. Probability Density Function (PDF) of the local porosity (φa) and associated{\textellipsis}

Fig. 4. (a) Degrees of freedom of a link element between points i and j, (b) D3Q18 unit{\textellipsis}

Fig. 5. Dimensionless effective Young{\textquoteright}s modulus: Eeff(φ)/Es as function of the porosity{\textellipsis}

Fig. 6. Dimensionless effective Young{\textquoteright}s modulus: Eeff(φ)/Es as function of the porosity

Fig. 7. Ordered system under uniaxial strain, (a) schematic stress map, the darker the{\textellipsis}

Fig. 8. Dimensionless effective Young{\textquoteright}s modulus: Eeff(φ)/Es as function of the porosity

Fig. 9. Probability Density Function (PDF) of the normalized stress (σxx/〈σxx〉) in the{\textellipsis}

Fig. 10. Dimensionless disordered Young{\textquoteright}s modulus: F(φsa)=Eeff(φ,sa)/Eordered(φ) as{\textellipsis}

Fig. 11. Two-phase periodic porous solid

Fig. 12. Dimensionless disordered Young{\textquoteright}s modulus: FMT(φsa)=Eeff(φ,sa)/EMT(φ) as{\textellipsis}

Fig. 13. Integration path for the lower bound differential scheme

Fig. 14. Dimensionless effective Young{\textquoteright}s modulus: Eeff(φ)/Es as function of porosity the

Fig. 15. Dimensionless disordered Young{\textquoteright}s modulus: FMT(φsa)=Eeff(φ,sa)/EMT(φ) as{\textellipsis}

Fig. B.16. (a) Porosity as a function of the number of pores

Fig. D.17. High porosity limit geometry

Fig. E.18. Calculation of the local porosity in a square observation window

}, doi = {10.1016/j.jmps.2017.05.008}, author = {Hadrien Laubie and Monfared, Siavash and Farhang Radja{\"\i} and Roland Jean-Marc Pellenq and Franz-Josef Ulm} } @article {601, title = {Effect of particle size distribution on 3D packings of spherical particles}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 02030}, abstract = {

We use molecular dynamics simulations of frictionless spherical particles to investigate a class of polydisperse granular materials in which the particle size distribution is uniform in particle volumes. The particles are assembled in a box by uniaxial compaction under the action of a constant stress. Due to the absence of friction and the nature of size distribution, the generated packings have the highest packing fraction at a given size span, defined as the ratio of the largest size to the smallest size. We find that, up to = 5, the packing fraction is a nearly linear function of . While the coordination number is nearly constant due to the isostatic nature of the packings, we show that the connectivity of the particles evolves with . In particular, the proportion of particles with 4 contacts represents the largest proportion of particles mostly of small size. We argue that this particular class of particles occurs as a result of the high stability of local configurations in which a small particle is stuck by four larger particles.

}, doi = {10.1051/epjconf/201714002030}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714002030}, author = {Taiebat, Mahdi and Patrick Mutabaruka and Roland Jean-Marc Pellenq and Farhang Radja{\"\i}}, editor = {Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {591, title = {Effective Potentials and Elastic Properties in the Lattice-Element Method: Isotropy and Transverse Isotropy}, journal = {Journal of Nanomechanics and Micromechanics}, volume = {7}, year = {2017}, month = {Sep-2017}, pages = { Article Number: UNSP 04017007 }, abstract = {

Lattice approaches have emerged as a powerful tool to capture the effective mechanical behavior of heterogeneous materials using harmonic interactions inspired from beam-type stretch and rotational interactions between a discrete number of mass points. In this paper, the lattice element method (LEM) is reformulated within the conceptual framework of empirical force fields employed at the lattice scale. Within this framework, because classical harmonic formulations are but a Taylor expansion of nonharmonic potential expressions, they can be used to model both the linear and the nonlinear response of discretized material systems. Specifically, closed-form calibration procedures for such interaction potentials are derived for both the isotropic and the transverse isotropic elastic cases on cubic lattices, in the form of linear relations between effective elasticity properties and energy parameters that define the interactions. The relevance of the approach is shown by an application to the classical Griffith crack problem. In particular, it is shown that continuum-scale quantities of linear-elastic fracture mechanics, such as stress intensity factors (SIFs), are well captured by the method, which by its very discrete nature removes geometric discontinuities that provoke stress singularities in the continuum case. With its strengths and limitations thus defined, the proposed LEM is well suited for the study of multiphase materials whose microtextural information is obtained by, e.g., X-ray micro-computed tomography. (c) 2017 American Society of Civil Engineers.

}, issn = {2153-5434}, doi = {10.1061/(ASCE)NM.2153-5477.0000125}, url = {http://ascelibrary.org/doi/10.1061/\%28ASCE\%29NM.2153-5477.0000125}, author = {Hadrien Laubie and Monfared, Siavash and Farhang Radja{\"\i} and Roland Jean-Marc Pellenq and Franz-Josef Ulm} } @article {595, title = {Heat-induced aging of agar solutions: Impact on the structural and mechanical properties of agar gels}, journal = {Food Hydrocolloids}, volume = {64}, year = {2017}, month = {Mar-2017}, pages = {59 - 69}, abstract = {

Thermoreversible gels are commonly prepared by cooling down to ambient temperature, aqueous polymer solutions first brought to a boil for a short time. Here, we study the effect of the latter duration on the subsequent gelation of an agar solution. Increasing the incubation time at high temperature (T= 80 degrees C) from hours to a few days leads to the hydrolysis and the oxidation of the polysaccharides, and results in the decrease of the viscosity and the pH of the solution. Samples withdrew at different incubation times are cooled down to form gels whose structure and mechanical properties are systematically determined. Cryoelectron microscopy and X-ray diffraction experiments reveal that agar gels formed from solutions of increasing incubation times, display a coarser microstructure composed of micron-sized foils which result from the condensation of the polysaccharides, and contrast with the fibrous-like microstructure of gels prepared from a fresh agar solution. Along with structural changes, a prolonged incubation time of the agar solution at T = 80 degrees C leads to weaker gels than those made from fresher solutions, and extensive macro-indentation experiments coupled to direct visualization show that the gel rupture scenario turns from brittle to ductile-like as the incubation time increases. Our study suggests that the incubation time of agar solutions at high temperature could be used as an external control parameter to tune the mechanical properties of agar-based gels. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Agar; Aging; Gelation; Debonding; Indentation; Fracture}, issn = {0268005X}, doi = {10.1016/j.foodhyd.2016.10.020}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0268005X16305793}, author = {Mao, Bosi and Bentaleb, Ahmed and Louerat, Fr{\'e}d{\'e}ric and Divoux, Thibaut and Snabre, Patrick} } @article {584, title = {Impact of saccharides on the drying kinetics of agarose gels measured by in-situ interferometry}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {Jan-23-2017}, pages = { Article Number: 41185 }, abstract = {

Agarose gels are viscoelastic soft solids that display a porous microstructure filled with water at 90\% w/w or more. Despite an extensive use in food industry and microbiology, little is known about the drying kinetics of such squishy solids, which suffers from a lack of time-resolved local measurements. Moreover, only scattered empirical observations are available on the role of the gel composition on the drying kinetics. Here we study by in-situ interferometry the drying of agarose gels of various compositions cast in Petri dishes. The gel thinning is associated with the displacement of interference fringes that are analyzed using an efficient spatiotemporal filtering method, which allows us to assess local thinning rates as low as 10 nm/s with high accuracy. The gel thinning rate measured at the center of the dish appears as a robust observable to quantify the role of additives on the gel drying kinetics and compare the drying speed of agarose gels loaded with various non-gelling saccharides of increasing molecular weights. Our work shows that saccharides systematically decrease the agarose gel thinning rate up to a factor two, and exemplifies interferometry as a powerful tool to quantify the impact of additives on the drying kinetics of polymer gels.

}, doi = {10.1038/srep41185}, url = {http://www.nature.com/articles/srep41185}, author = {Mao, Bosi and Divoux, Thibaut and Snabre, Patrick} } @article {613, title = {Inorganic, Hybridized and Living Macrocellular Foams: {\textquotedblleft}Out of the Box{\textquotedblright} Heterogeneous Catalysis}, journal = {The Chemical Record}, volume = {18}, year = {2017}, month = {Dec-01-2017}, pages = {776-787}, abstract = {

With this personal account we show how the Integrative Chemistry, when combining the sol-gel process and concentrated emulsions, allows to trigger inorganic, hybrid or living materials when dedicated toward heterogeneous catalysis applications. In here we focus on 3D-macrocellular monolithic foams bearing hierarchical porosities and applications thereof toward heterogeneous catalysis where both activities and mass transport are enhanced. We thereby first depict the general background of emulsions, focusing on concentrated ones, acting as soft templates for the design of solid (HIPE) foams, HIPE being the acronym for High Internal Phase Emulsions while encompassing both sol-gel and polymer chemistry. Secondly we extend this approach toward the design of inorganic cellular materials labeled Si(HIPE) and hybrid organic-inorganic foams, labeled Organo-Si(HIPE), where heterogeneous catalysis applications are addressed considering acidic, metallic, enzymatic and bacterial-based modified Si-HIPE. Along, we will show how the fluid hydrodynamic within the macrocellular foams is offering advanced \"out of the box\" heterogeneous catalytic capabilities.

}, keywords = {catalysts; emulsion-templating; integrative chemistry; porous matter; sol-gel process}, doi = {10.1002/tcr.v18.7-810.1002/tcr.201700075}, url = {http://doi.wiley.com/10.1002/tcr.v18.7-8}, author = {Roucher, Armand and Depardieu, Martin and Pekin, Deniz and Morvan, Micka{\"e}l and Backov, Renal} } @article {410, title = {Magnetism as indirect tool for carbon content assessment in nickel nanoparticles}, journal = {Journal of Applied Physics}, volume = {122}, year = {2017}, month = {Jul-12-2017}, pages = {213902}, abstract = {

We report a combined experimental and theoretical study to ascertain carbon solubility in nickel nanoparticles embedded into a carbon matrix via the one-pot method. This original approach is based on the experimental characterization of the magnetic properties of Ni at room temperature and Monte Carlo simulations used to calculate the magnetization as a function of C content in Ni nanoparticles. Other commonly used experimental methods fail to accurately determine the chemical analysis of these types of nanoparticles. Thus, we could assess the C content within Ni nanoparticles and it decreases from 8 to around 4\ at. \% with increasing temperature during the synthesis. This behavior could be related to the catalytic transformation of dissolved C in the Ni particles into graphite layers surrounding the particles at high temperature. The proposed approach is original and easy to implement experimentally since only magnetization measurements at room temperature are needed. Moreover, it can be extended to other types of magnetic nanoparticles dissolving carbon.

}, issn = {0021-8979}, doi = {10.1063/1.5006138}, url = {http://aip.scitation.org/doi/10.1063/1.5006138http://aip.scitation.org/doi/pdf/10.1063/1.5006138}, author = {Oumellal, Y. and Yann Magnin and {\'\i}nez de Yuso, A. and Aguiar Hualde, J. M. and Amara, H. and Paul-Boncour, V. and Matei Ghimbeu, C. and Malouche, A. and Christophe Bichara and Roland Jean-Marc Pellenq and Zlotea, C.} } @article {615, title = {Many-body heat radiation and heat transfer in the presence of a nonabsorbing background medium}, journal = {Physical Review B}, volume = {95}, year = {2017}, month = {Feb-15-2017}, abstract = {

Heat radiation and near-field radiative heat transfer can be strongly manipulated by adjusting geometrical shapes, optical properties, or the relative positions of the objects involved. Typically, these objects are considered as embedded in vacuum. By applying the methods of fluctuational electrodynamics, we derive general closed-form expressions for heat radiation and heat transfer in a system of N arbitrary objects embedded in a passive nonabsorbing background medium. Taking into account the principle of reciprocity, we explicitly prove the symmetry and positivity of transfer in any such system. Regarding applications, we find that the heat radiation of a sphere as well as the heat transfer between two parallel plates is strongly enhanced by the presence of a background medium. Regarding near- and far-field transfer through a gas like air, we show that a microscopic model (based on gas particles) and a macroscopic model (using a dielectric contrast) yield identical results. We also compare the radiative transfer through a medium like air and the energy transfer found from kinetic gas theory.

}, issn = {2469-9950}, doi = {10.1103/PhysRevB.95.085413}, url = {https://link.aps.org/doi/10.1103/PhysRevB.95.085413}, author = {M{\"u}ller, Boris and Incardone, Roberta and Antezza, Mauro and Emig, Thorsten and Kr{\"u}ger, Matthias} } @article {586, title = {Mesoscale Poroelasticity of Heterogeneous Media}, journal = {Journal of Nanomechanics and Micromechanics}, volume = {7}, year = {2017}, month = {Oct-19-2017}, pages = {Article Number: UNSP 04017016 }, abstract = {

The poromechanics of heterogeneous media is reformulated in a discrete framework using the lattice element method (LEM) that accounts for the presence of interfaces as well as local microtextural and elastic variations. The exchange of mechanical information between pore and solid(s) is captured by means of force field potentials for these domains, which eliminate the requirement of scale separability of continuum-based poromechanics approaches. In congruence with mu VT and NPT ensembles of statistical mechanics, discrete expressions for Biot poroelastic coefficients are derived. Considering harmonic-type interaction potentials for each link, analytical expressions for both isotropic and transversely isotropic effective elasticity are presented. The theory is validated against continuum-based expressions of Biot poroelastic coefficients for porous media with isotropic and transversely isotropic elastic solid behavior. (C) 2017 American Society of Civil Engineers.

}, issn = {2153-5434}, doi = {10.1061/(ASCE)NM.2153-5477.0000136}, url = {http://ascelibrary.org/doi/10.1061/\%28ASCE\%29NM.2153-5477.0000136}, author = {Monfared, Siavash and Hadrien Laubie and Farhang Radja{\"\i} and Roland Jean-Marc Pellenq and Franz-Josef Ulm} } @article {241, title = {Model representations of kerogen structures: An insight from density functional theory calculations and spectroscopic measurements}, journal = {Scientific Reports}, volume = {7}, year = {2017}, month = {Aug-01-2017}, pages = {Article Number: 7068}, abstract = {

Molecular structures of kerogen control hydrocarbon production in unconventional reservoirs. Significant progress has been made in developing model representations of various kerogen structures. These models have been widely used for the prediction of gas adsorption and migration in shale matrix. However, using density functional perturbation theory (DFPT) calculations and vibrational spectroscopic measurements, we here show that a large gap may still remain between the existing model representations and actual kerogen structures, therefore calling for new model development. Using DFPT, we calculated Fourier transform infrared (FTIR) spectra for six most widely used kerogen structure models. The computed spectra were then systematically compared to the FTIR absorption spectra collected for kerogen samples isolated from Mancos, Woodford and Marcellus formations representing a wide range of kerogen origin and maturation conditions. Limited agreement between the model predictions and the measurements highlights that the existing kerogen models may still miss some key features in structural representation. A combination of DFPT calculations with spectroscopic measurements may provide a useful diagnostic tool for assessing the adequacy of a proposed structural model as well as for future model development. This approach may eventually help develop comprehensive infrared (IR)-fingerprints for tracing kerogen evolution.

}, doi = {10.1038/s41598-017-07310-9}, author = {Weck, Philippe F. and Kim, Eunja and Wang, Yifeng and Kruichak, Jessica N. and Mills, Melissa M. and Matteo, Edward N. and Roland Jean-Marc Pellenq} } @article {582, title = {Nonlinear Viscoelasticity and Generalized Failure Criterion for Polymer Gels}, journal = {ACS Macro Letters}, volume = {6}, year = {2017}, month = {Jun-12--2017}, pages = {663 - 667}, abstract = {

Polymer gels behave as soft viscoelastic solids and exhibit a generic nonlinear mechanical response characterized by pronounced stiffening prior to irreversible failure, most often through macroscopic fractures. Here, we describe this scenario for a model protein gel using an integral constitutive equation built upon the linear and the nonlinear viscoelastic properties of the gel. We show that this formalism predicts quantitatively the gel mechanical response in shear start-up experiments, up to the onset of macroscopic failure. Moreover, we couple the computed stress response with Bailey\&$\#$39;s durability criterion for brittle solids in order to predict the critical values of the stress sigma(c) and strain gamma(c) at failure. The excellent agreement between theory and experiments suggests that failure in this soft viscoelastic gel is a Markovian process and that Bailey\&$\#$39;s failure criterion extends beyond hard materials such as metals, glasses, or minerals.

}, issn = {2161-1653}, doi = {10.1021/acsmacrolett.7b00213}, url = {http://pubs.acs.org/doi/10.1021/acsmacrolett.7b00213}, author = {Keshavarz, Bavand and Divoux, Thibaut and Manneville, S{\'e}bastien and McKinley, Gareth H.} } @article {597, title = {Peridynamics simulation of the comminution of particles containing microcraks}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 07018}, abstract = {

In this study, we rely on a \’bond-based\’ peridynamic approach to investigate the strength and failure of 2D particles containing a collection of 1D microcracks. The mechanical tests were performed on disks under diametral compression. In an extensive parametric study, the distribution of microcracks was varied for different particle sizes. The evolution of yield stress with diameter and the probability of failure in terms of Weibull distributions are investigated in detail. Finally, by means of a floodfill algorithm, we analyze the variation of the mean fragment size as a function of the density of defects.

}, doi = {10.1051/epjconf/201714007018}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714007018}, author = {Blanc, Nicolas and Frank, Xavier and Mayer-Laigle, Claire and Farhang Radja{\"\i} and Jean-Yves Delenne}, editor = {Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {607, title = {Scaling behavior of immersed granular flows}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 09044}, abstract = {

The shear behavior of granular materials immersed in a viscous fluid depends on fluid properties (viscosity, density), particle properties (size, density) and boundary conditions (shear rate, confining pressure). Using computational fluid dynamics simulations coupled with molecular dynamics for granular flow, and exploring a broad range of the values of parameters, we show that the parameter space can be reduced to a single parameter that controls the packing fraction and effective friction coefficient. This control parameter is a modified inertial number that incorporates viscous effects.

}, doi = {10.1051/epjconf/201714009044}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714009044}, author = {L. Amarsid and Jean-Yves Delenne and Patrick Mutabaruka and Yann Monerie and Perales, F. and Farhang Radja{\"\i}}, editor = {Saeid Nezamabadi and Luding, S.} } @article {605, title = {Small solar system bodies as granular systems}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 14011}, abstract = {

Asteroids and other Small Solar System Bodies (SSSBs) are currently of great scientific and even industrial interest. Asteroids exist as the permanent record of the formation of the Solar System and therefore hold many clues to its understanding as a whole, as well as insights into the formation of planetary bodies. Additionally, SSSBs are being investigated in the context of impact risks for the Earth, space situational awareness and their possible industrial exploitation (asteroid mining). In all these aspects, the knowledge of the geophysical characteristics of SSSB surface and internal structure are of great importance. Given their size, constitution, and the evidence that many SSSBs are not simple monoliths, these bodies should be studied and modelled as self-gravitating granular systems in general, or as granular systems in micro-gravity environments in particular contexts. As such, the study of the geophysical characteristics of SSSBs is a multi-disciplinary effort that lies at the crossroads between Granular Mechanics, Celestial Mechanics, Soil Mechanics, Aerospace Engineering and Computer Sciences.

}, doi = {10.1051/epjconf/201714014011}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714014011}, author = {Hestroffer, Daniel and Adriano Campo Bagat{\'\i}n and Losert, Wolfgang and Opsomer, Eric and S{\'a}nchez, Paul and Scheeres, Daniel J. and Staron, Lydie and Taberlet, Nicolas and Yano, Hajime and Eggl, Siegfried and Lecomte, Charles-Edouard and Murdoch, Naomi and Farhang Radja{\"\i} and Richardson, Derek C. and Salazar, Marcos and Schwartz, Stephen R. and Tanga, Paolo}, editor = {Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {599, title = {Strength of wet agglomerates of spherical particles: effects of friction and size distribution}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 08021}, abstract = {

We investigate the mechanical behavior of wet granular agglomerates composed of spherical particles by means of molecular dynamics simulations. The capillary cohesion force is modeled as an attraction force at the contact between two particles and expressed as an explicit function of the gap and volume of the liquid bridge. We are interested in the effect of the friction coefficient between primary particles. The agglomerates are subjected to diametrical compression tests. We find that the deformation is ductile involving particle rearrangements. However, a well-defined stress peak is observed and the peak stress is used as a measure of the compressive strength of the agglomerate. The strength increases with friction coefficient but levels off at friction coefficients above 0.4. Furthermore, the compressive strength is an increasing function of particle size span.

}, doi = {10.1051/epjconf/201714008021}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714008021}, author = {Vo, Thanh-Trung and Patrick Mutabaruka and Jean-Yves Delenne and Saeid Nezamabadi and Farhang Radja{\"\i}}, editor = {Luding, S.} } @article {243, title = {Topological Control on the Structural Relaxation of Atomic Networks under Stress}, journal = {Physical Review Letters}, volume = {119}, year = {2017}, month = {Jul-21-2017}, pages = {Article Number: 035502}, abstract = {

Upon loading, atomic networks can feature delayed irreversible relaxation. However, the effect of composition and structure on relaxation remains poorly understood. Herein, relying on accelerated molecular dynamics simulations and topological constraint theory, we investigate the relationship between atomic topology and stress-induced structural relaxation, by taking the example of creep deformations in calcium silicate hydrates (C-S-H), the binding phase of concrete. Under constant shear stress, C-S-H is found to feature delayed logarithmic shear deformations. We demonstrate that the propensity for relaxation is minimum for isostatic atomic networks, which are characterized by the simultaneous absence of floppy internal modes of relaxation and eigenstress. This suggests that topological nanoengineering could lead to the discovery of nonaging materials.

Figure

Figure

Figure

}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.119.035502}, author = {Mathieu Bauchy and Wang, Mengyi and Yu, Yingtian and Wang, Bu and Krishnan, M. Anoop and Enrico Masoero and Franz-Josef Ulm and Roland Jean-Marc Pellenq} } @article {583, title = {Understanding rheological hysteresis in soft glassy materials}, journal = {Soft Matter}, volume = {13}, year = {2017}, month = {Mar-07-2017}, pages = {1834-1852}, abstract = {

Motivated by recent experimental studies of rheological hysteresis in soft glassy materials, we study numerically strain rate sweeps in simple yield stress fluids and viscosity bifurcating yield stress fluids. Our simulations of downward followed by upward strain rate sweeps, performed within fluidity models and the soft glassy rheology model, successfully capture the experimentally observed monotonic decrease of the area of the rheological hysteresis loop with sweep time in simple yield stress fluids, and the bell shaped dependence of hysteresis loop area on sweep time in viscosity bifurcating fluids. We provide arguments explaining these two different functional forms in terms of differing tendencies of simple and viscosity bifurcating fluids to form shear bands during the sweeps, and show that the banding behaviour captured by our simulations indeed agrees with that reported experimentally. We also discuss the difference in hysteresis behaviour between inelastic and viscoelastic fluids. Our simulations qualitatively agree with the experimental data discussed here for four different soft glassy materials.

}, issn = {1744-683X}, doi = {10.1039/C6SM02581A}, url = {http://xlink.rsc.org/?DOI=C6SM02581A}, author = {Radhakrishnan, Rangarajan and Divoux, Thibaut and Manneville, S{\'e}bastien and Fielding, Suzanne M.} } @article {263, title = {Viscoinertial regime of immersed granular flows}, journal = {Physical Review E}, volume = {96}, year = {2017}, month = {Oct-10-2017}, pages = {Article Number: 012901}, abstract = {

By means of extensive coupled molecular dynamics\–lattice Boltzmann simulations, accounting for grain dynamics and subparticle resolution of the fluid phase, we analyze steady inertial granular flows sheared by a viscous fluid. We show that, for a broad range of system parameters (shear rate, confining stress, fluid viscosity, and relative fluid-grain density), the frictional strength and packing fraction can be described by a modified inertial number incorporating the fluid effect. In a dual viscous description, the effective viscosity diverges as the inverse square of the difference between the packing fraction and its jamming value, as observed in experiments. We also find that the fabric and force anisotropies extracted from the contact network are well described by the modified inertial number, thus providing clear evidence for the role of these key structural parameters in dense suspensions.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, issn = {2470-0045}, doi = {10.1103/PhysRevE.96.012901}, author = {L. Amarsid and Jean-Yves Delenne and Patrick Mutabaruka and Yann Monerie and Perales, F. and Farhang Radja{\"\i}} } @article {581, title = {Yield stress materials in soft condensed matter}, journal = {Reviews of Modern Physics}, volume = {89}, year = {2017}, month = {Aug-21-2017}, pages = { Article Number: 035005 }, abstract = {

A comprehensive review is presented of the physical behavior of yield stress materials in soft condensed matter, which encompasses a broad range of materials from colloidal assemblies and gels to emulsions and non-Brownian suspensions. All these disordered materials display a nonlinear flow behavior in response to external mechanical forces due to the existence of a finite force threshold for flow to occur: the yield stress. Both the physical origin and rheological consequences associated with this nonlinear behavior are discussed and an overview is given of experimental techniques available to measure the yield stress. Recent progress is discussed concerning a microscopic theoretical description of the flow dynamics of yield stress materials, emphasizing, in particular, the role played by relaxation time scales, the interplay between shear flow and aging behavior, the existence of inhomogeneous shear flows and shear bands, wall slip, and nonlocal effects in confined geometries.

}, issn = {0034-6861}, doi = {10.1103/RevModPhys.89.035005}, url = {https://link.aps.org/doi/10.1103/RevModPhys.89.035005}, author = {Bonn, Daniel and Denn, Morton M. and Berthier, Ludovic and Divoux, Thibaut and Manneville, S{\'e}bastien} } @article {638, title = {Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles}, journal = {Chemistry - A European Journal}, volume = {22}, year = {2016}, month = {Jul-04-2016}, pages = {9660-9666}, abstract = {

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested.

}, doi = {10.1002/chem.201601351}, url = {http://doi.wiley.com/10.1002/chem.201601351}, author = {Deliere, Ludovic and Benoit A. Coasne and Topin, Sylvain and Gr{\'e}au, Claire and Moulin, Christophe and David Farrusseng} } @proceedings {338, title = {Contribution of mechanical factors to the variability of root architecture: Quantifying the past history of interaction forces between growing roots and soil grains}, journal = {2016 IEEE INTERNATIONAL CONFERENCE ON FUNCTIONAL-STRUCTURAL PLANT GROWTH MODELING, SIMULATION, VISUALIZATION AND APPLICATIONS (FSPMA)}, year = {2016}, month = {Nov-11-2016}, pages = {52-60}, publisher = {I E E E}, address = {NOV 07-11, 2016, Qingdao, PEOPLES R CHINA }, abstract = {

The relation between a growing root and the soil movement has often been under-estimated. The present work aims to determine how grains in granular soils are reorganized by the action of growing roots, and in turn how the resulting forces acting on root tips modify their development. For this purpose, we have developed a 2D Discrete Element Model (DEM) able to compute a numerical growth of a single root inside a granular medium, taking into account the grain-grain and the root-grain contact forces during the growth. First in silico simulations were carried out in order to : 1-quantify the influence of the granular structure (grain diameter distribution and gaps) and root mechanical properties (root bending stiffness) on the evolution of reaction forces applied to a single root during its growth; 2-highlight \“group effects\”, e.g. how the reorganization of grains and their interaction forces due to a given growing root can affect the mechanical signal perceived by its near neighbours; 3-investigate how the presence of initial channels within the granular medium can effect the growth trajectory and minimize the resistance to penetration. All simulations were carried out assuming that root growth direction was only driven by external forces. Simlation results allowed the extraction of general physical laws that will be used further to provide mechanoperceptive indicators and analyze experimental data provided by phenotyping platforms. The final objective will be to quantify the response of plants to mechanical stresses in terms of root elongation rate, root straightness and ramification.

}, doi = {10.1109/FSPMA.2016.7818288}, author = {Fakih, Mahmoud and Jean-Yves Delenne and Farhang Radja{\"\i} and Fourcaud, Thierry} } @article {621, title = {The crucial effect of early-stage gelation on the mechanical properties of cement hydrates}, journal = {Nature Communications}, volume = {7}, year = {2016}, month = {Jul-15-2016}, pages = {Article number 12106}, abstract = {

Gelation and densification of calcium\–silicate\–hydrate take place during cement hydration. Both processes are crucial for the development of cement strength, and for the long-term evolution of concrete structures. However, the physicochemical environment evolves during cement formation, making it difficult to disentangle what factors are crucial for the mechanical properties. Here we use Monte Carlo and Molecular Dynamics simulations to study a coarse-grained model of cement formation, and investigate the equilibrium and arrested states. We can correlate the various structures with the time evolution of the interactions between the nano-hydrates during the preparation of cement. The novel emerging picture is that the changes of the physicochemical environment, which dictate the evolution of the effective interactions, specifically favour the early gel formation and its continuous densification. Our observations help us understand how cement attains its unique strength and may help in the rational design of the properties of cement and related materials.

}, doi = {10.1038/ncomms12106}, url = {http://www.nature.com/articles/ncomms12106}, author = {Katerina Ioannidou and Matej, Kandu{\v c} and Li, Lunna and Frenkel, Daan and Dobnikar, Jure and Emanuela Del Gado} } @article {269, title = {An equation of state for granular media at the limit state of isotropic compression}, journal = {EPL (Europhysics Letters)}, volume = {114}, year = {2016}, month = {Apr-2016}, pages = {Article Number: 14004}, abstract = {

It is well believed that the volumetric entropy of Edwards captures part of the physics of granular media, but it is still unclear whether it can be applied to granular systems under mechanical stress. By working out a recent proposal by Aste, Di Matteo et al. to measure Edwards\&$\#$39; compactivity from the volume distribution of Vorono\ï or Delaunay tessellations (Phys. Rev. E, 77 (2008) 021309), and assuming that the total volume divides into elementary cells of fixed minimal volume, we derive an equation of state relating the compactivity to the packing fraction, and we show by extensive molecular-dynamics simulations that this equation and its underlying assumption describe well the volumetric aspects of both the limit state of isotropic compression and the limit state of shear (also called critical state in soil mechanics) for three-dimensional ensembles of mono-disperse spheres, for a broad range of the sliding and rolling friction coefficients. In addition, by using the limit state of isotropic compression as testing ground, we find that the compactivity, the entropy per elementary cell and the number of elementary cells per grain computed by this method are the same within statistical precision, either by using Vorono\ï, Delaunay, or centroidal Vorono\ï tessellations, allowing thus for an objective definition. This means that not only Aste\&$\#$39;s cell method is robust and suitable to measure Edwards\&$\#$39; compactivity of granular systems under mechanical stress but also the actual nature of the elementary cells might be unimportant.

}, issn = {0295-5075}, doi = {10.1209/0295-5075/114/14004}, author = {Oquendo, W. F. and Mu{\~n}oz, J. D. and Farhang Radja{\"\i}} } @article {196, title = {Mesoscale texture of cement hydrates}, journal = {Proceedings of the National Academy of Sciences}, volume = {113}, year = {2016}, month = {Feb-23-2016}, pages = {2029 - 2034}, abstract = {

Strength and other mechanical properties of cement and concrete rely upon the formation of calcium\–silicate\–hydrates (C\–S\–H) during cement hydration. Controlling structure and properties of the C\–S\–H phase is a challenge, due to the complexity of this hydration product and of the mechanisms that drive its precipitation from the ionic solution upon dissolution of cement grains in water. Departing from traditional models mostly focused on length scales above the micrometer, recent research addressed the molecular structure of C\–S\–H. However, small-angle neutron scattering, electron-microscopy imaging, and nanoindentation experiments suggest that its mesoscale organization, extending over hundreds of nanometers, may be more important. Here we unveil the C\–S\–H mesoscale texture, a crucial step to connect the fundamental scales to the macroscale of engineering properties. We use simulations that combine information of the nanoscale building units of C\–S\–H and their effective interactions, obtained from atomistic simulations and experiments, into a statistical physics framework for aggregating nanoparticles. We compute small-angle scattering intensities, pore size distributions, specific surface area, local densities, indentation modulus, and hardness of the material, providing quantitative understanding of different experimental investigations. Our results provide insight into how the heterogeneities developed during the early stages of hydration persist in the structure of C\–S\–H and impact the mechanical performance of the hardened cement paste. Unraveling such links in cement hydrates can be groundbreaking and controlling them can be the key to smarter mix designs of cementitious materials.

Fig. 1.

}, issn = {0027-8424}, doi = {10.1073/pnas.1520487113}, author = {Katerina Ioannidou and Konrad J. Krakowiak and Mathieu Bauchy and Christian G. Hoover and Enrico Masoero and Sidney Yip and Franz-Josef Ulm and Pierre E. Levitz and Roland Jean-Marc Pellenq and Emanuela Del Gado} } @article {325, title = {A molecular informed poroelastic model for organic-rich, naturally occurring porous geocomposites}, journal = {Journal of the Mechanics and Physics of Solids}, volume = {88}, year = {2016}, month = {Mar-2016}, pages = {186 - 203}, abstract = {

Molecular simulation results on organic maturity (mature and immature kerogen as the two asymptotic cases) are introduced into a continuum micromechanics based model for organic-rich shales. Through a fundamental functional relationship that constrains microporous kerogen density and elasticity variable spaces and within the framework of effective media theory; the model bridges the gap between asymptotic cases of organic maturity with texture as the overriding theme, specifically a matrix/inclusion (Mori\–Tanaka) texture for immature systems and a granular (self-consistent) texture for mature ones. The utility of the molecular results merged into a continuum framework is demonstrated by estimating kerogen\&$\#$39;s microporosity () from nanoindentation measurements. The effect of burial and diagenetic processes on the effective poroelasticity of these porous, naturally occurring geocomposites are captured by introduction of imperfect interfaces. Finally, the performance of the model is fully characterized by ranking the normalized contribution of uncertainty of input to the overall behavior and parameters of interest to geophysicists and geomechanicians such as degree of anisotropy and in situ stresses.

Fig.1. Clay type distribution in the studied samples

Fig.2. Schematics for the multi-scale maturity dependent model for organic-rich shales

Fig.3. A Scanning Electron Microscope (SEM) image on Haynesville sample

Fig.4. Calibration quality check by comparing predicted macroscopic values (drained{\textellipsis}

Fig.5. Validation by means of nanoindentation for Woodford on the left and Haynesville{\textellipsis}

Fig.6. Bulk modulus of kerogen against density for two of the samples studied by{\textellipsis}

}, issn = {00225096}, doi = {10.1016/j.jmps.2015.12.006}, author = {Monfared, Siavash and Franz-Josef Ulm} } @article {640, title = {Nanoporous chalcogenides for adsorption and gas separation}, journal = {Physical Chemistry Chemical Physics}, volume = {18}, year = {2016}, month = {May-21-2016}, pages = {13449-13458}, abstract = {

The adsorption and gas separation properties of amorphous porous chalcogenides such as GeS2 are investigated using statistical mechanics molecular simulation. Using a realistic molecular model of such amorphous adsorbents, we show that they can be used efficiently to separate different gases relevant to environmental and energy applications (H-2, CO2, CH4, N-2). In addition to shedding light on the microscopic adsorption mechanisms, we show that coadsorption in this novel class of porous materials can be described using the ideal adsorbed solution theory (IAST). Such a simple thermodynamic model, which allows avoiding complex coadsorption measurements, describes the adsorption of mixture from pure component adsorption isotherms. Our results, which are found to be in good agreement with available experimental data, paves the way for the design of gas separation membranes using the large family of porous chalcogenides.

}, issn = {1463-9076}, doi = {10.1039/C6CP00467A}, url = {http://xlink.rsc.org/?DOI=C6CP00467A}, author = {Guido Ori and Carlo Massobrio and Pradel, Annie and Ribes, Miche and Benoit A. Coasne} } @article {641, title = {Probing Interconnectivity in Hierarchical Microporous/Mesoporous Materials Using Adsorption and Nuclear Magnetic Resonance Diffusion}, journal = {The Journal of Physical Chemistry C}, volume = {120}, year = {2016}, month = {Jan-28-2016}, pages = {1562-1569}, abstract = {

Adsorption and transport in hierarchical materials are investigated by means of adsorption and nuclear magnetic resonance experiments. Using micro/mesoporous zeolites with well-defined mesoporosity, we show that adsorption at a given pressure can be described as a simple linear combination of the adsorbed amounts taken at the same pressure for the pure microporous (zeolite FAU-Y) and mesoporous (Al-MCM-41) solids. Such a quantitative decomposition allows us to demonstrate the ability of diffusion measurements by Pulsed Field Gradient Nuclear Magnetic Resonance (PFG NMR) to probe interconnectivity in hierarchical solids. On the one hand, transport in the mechanical mixtures can be described as the superimposition of diffusion in pure microporous and mesoporous solids. On the other hand, PFG NMR for the hierarchical sample provides an effective diffusivity that is intermediate between those for the pure zeolite and mesoporous silica. Furthermore, this effective diffusivity is slower than the linear combination of the two diffusivities weighted by the number of molecules present in each phase (used in the independent domain and fast-exchange theories) clearly showing interconnectivities and transfer limitations between the microporous and mesoporous domains. We also discuss the ability of combining theories such as the fast exchange model and the effective medium theory to quantitatively predict diffusion in such microporous/mesoporous materials.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b10129}, url = {http://pubs.acs.org/doi/10.1021/acs.jpcc.5b10129}, author = {Anne Galarneau and Guenneau, Flavien and Gedeon, Antoine and Mereib, Diaa and Rodriguez, Jeremy and Fajula, Fran{\c c}ois and Benoit A. Coasne} } @article {585, title = {Simultaneous Rheoelectric Measurements of Strongly Conductive Complex Fluids}, journal = {Physical Review Applied}, volume = {6}, year = {2016}, month = {Dec-09-2016}, pages = { Article Number: 064004 }, abstract = {

We introduce an modular fixture designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a nontoxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements at values as low as 1 Pa. Motivated by applications such as flow batteries, we use the capabilities of this design to perform an extensive set of rheoelectric experiments on gels formulated from attractive carbon-black particles, at concentrations ranging from 4 to 15 wt \%. First, experiments on gels at rest prepared with different shear histories show a robust power-law scaling between the elastic modulus G(0)\&$\#$39; and the conductivity sigma(0) of the gels-i.e., G(0)\&$\#$39; similar to sigma(alpha)(0), with alpha = 1.65 +/- 0.04, regardless of the gel concentration. Second, we report conductivity measurements performed simultaneously with creep experiments. Changes in conductivity in the early stage of the experiments, also known as the Andrade-creep regime, reveal for the first time that plastic events take place in the bulk, while the shear rate gamma decreases as a weak power law of time. The subsequent evolution of the conductivity and the shear rate allows us to propose a local yielding scenario that is in agreement with previous velocimetry measurements. Finally, to establish a set of benchmark data, we determine the constitutive rheological and electrical behavior of carbon-black gels. Corrections first introduced for mechanical measurements regarding shear inhomogeneity and wall slip are carefully extended to electrical measurements to accurately distinguish between bulk and surface contributions to the conductivity. As an illustrative example, we examine the constitutive rheoelectric properties of five different grades of carbon-black gels and we demonstrate the relevance of this rheoelectric apparatus as a versatile characterization tool for strongly conductive complex fluids and their applications.

}, doi = {10.1103/PhysRevApplied.6.064004}, url = {https://link.aps.org/doi/10.1103/PhysRevApplied.6.064004}, author = {Helal, Ahmed and Divoux, Thibaut and McKinley, Gareth H.} } @article {179, title = {Advances in design and modeling of porous materials}, journal = {The European Physical Journal Special Topics}, volume = {224}, year = {2015}, month = {Jul-2015}, pages = {1653 - 1653}, abstract = {

This special issue of the European Physical Journal Special Topics is dedicated to selected papers from the symposium \“High surface area porous and granular materials\” organized in the frame of the conference \“Mat\ériaux 2014\”, held on November 24\–28, 2014 in Montpellier, France.

Porous materials and granular materials gather a wide variety of heterogeneous, isotropic or anisotropic media made of inorganic, organic or hybrid solid skeletons, with open or closed porosity, and pore sizes ranging from the centimeter scale to the sub-nanometer scale. Their technological and industrial applications cover numerous areas from building and civil engineering to microelectronics, including also metallurgy, chemistry, health, waste water and gas effluent treatment. Many emerging processes related to environmental protection and sustainable development also rely on this class of materials. Their functional properties are related to specific transfer mechanisms (matter, heat, radiation, electrical charge), to pore surface chemistry (exchange, adsorption, heterogeneous catalysis) and to retention inside confined volumes (storage, separation, exchange, controlled release). The development of innovative synthesis, shaping, characterization and modeling approaches enables the design of advanced materials with enhanced functional performance. The papers collected in this special issue offer a good overview of the state-of-the-art and science of these complex media.

We would like to thank all the speakers and participants for their contribution to the success of the symposium. We also express our gratitude to the organization committee of \“Mat\´eriaux 2014\”. We finally thank the reviewers and the staff of the European Physical Journal Special Topics who made the publication of this special issue possible.

}, issn = {1951-6355}, doi = {10.1140/epjst/e2015-02487-6}, author = {Ayral, Andre and Calas-Etienne, Sylvie and Benoit A. Coasne and Deratani, Andr{\'e} and Evstratov, Alexis and Anne Galarneau and Grande, Daniel and Hureau, Matthieu and Jobic, Herv{\'e} and Morlay, Catherine and Parmentier, Julien and Prelot, B{\'e}n{\'e}dicte and Rossignol, Sylvie and Simon-Masseron, Ang{\'e}lique and Thibault-Starzyk, Fr{\'e}d{\'e}ric} } @proceedings {98, title = {Is cement a glassy material?}, journal = {Euro-C Conference}, volume = {COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, VOL 1}, year = {2015}, month = {Jun-22-2015}, pages = {169-176}, publisher = {CRC PRESS-TAYLOR \& FRANCIS GROUP}, address = {MAR 24-27, 2014, St Anton am Alberg, AUSTRIA}, abstract = {

The nature of Calcium-Silicate-Hydrate (C-S-H), the binding phase of cement, remains a controversial question. In particular, contrary to the former crystalline model, it was recently proposed that its nanoscale structure was actually amorphous. To elucidate this issue, we analyzed the structure of a realistic simulation of C-S-H, and compared the latter to crystalline tobermorite, a natural analogue to cement, and to an artificial ideal glass. Results clearly support that C-S-H is amorphous. However, its structure shows an intermediate degree of order, retaining some characteristics of the crystal while acquiring an overall glass-like disorder. Thanks to a detailed quantification of order and disorder, we show that its amorphous state mainly arises from its hydration.

}, isbn = {978-1-138-02641-4; 978-1-315-76203-6}, doi = {10.1201/b16645-19}, author = {Mathieu Bauchy and Mohammad Javad Abdolhosseini Qomi and Roland Jean-Marc Pellenq and Franz-Josef Ulm}, editor = {Bicanic, N and Mang, H and Meschke, G and DeBorst, R} } @proceedings {332, title = {Creep of Bulk C-S-H: Insights from Molecular Dynamics Simulations}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES }, year = {2015}, month = {Sep-17-2015}, pages = {511-516}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

Understanding the physical origin of creep in calcium\–silicate\–hydrate (C\–S\–H) is of primary importance, both for fundamental and practical interest. Here, we present a new method, based on molecular dynamics simulation, allowing us to simulate the long-term visco-elastic deformations of C\–S\–H. Under a given shear stress, C\–S\–H features a gradually increasing shear strain, which follows a logarithmic law. The computed creep modulus is found to be independent of the shear stress applied and is in excellent agreement with nanoindentation measurements, as extrapolated to zero porosity.

}, doi = {10.1061/978078447934610.1061/9780784479346.061}, author = {Mathieu Bauchy and Enrico Masoero and Franz-Josef Ulm and Roland Jean-Marc Pellenq}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {331, title = {C-S-H across Length Scales: From Nano to Micron}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES }, year = {2015}, month = {Sep-17-2015}, pages = {39-48}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

Despite their impact on longevity, serviceability, and environmental footprint of our built infrastructure, the chemo-physical origins of nanoscale properties of cementitious materials, and their link to macroscale properties still remain rather obscure. Here, we discuss a multi-scale approach that describes different aspects of physical properties of C-S-H at the nano- and meso-scales. These include dynamics of water, thermal properties and mechanical behavior of C-S-H and its effect on properties of cement paste at different scales.

}, doi = {10.1061/978078447934610.1061/9780784479346.006}, url = {http://ascelibrary.org/doi/book/10.1061/9780784479346http://ascelibrary.org/doi/pdf/10.1061/9780784479346http://ascelibrary.org/doi/10.1061/9780784479346.006http://ascelibrary.org/doi/pdf/10.1061/9780784479346.006}, author = {Mohammad Javad Abdolhosseini Qomi and Enrico Masoero and Mathieu Bauchy and Franz-Josef Ulm and Emanuela Del Gado and Roland Jean-Marc Pellenq}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {335, title = {Hydration Kinetics and Gel Morphology of C-S-H}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {565-573}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

Calcium-silicate hydrate (C-S-H) is the main binder in cement and concrete. It starts forming from the early stages of cement hydration and it progressively densifies as cement sets. C-S-H nanoscale building blocks form a cohesive gel, whose structure and mechanics are still poorly understood, in spite of its practical importance. Here we review a statistical physics approach recently developed, which allows us to investigate the C-S-H gel formation under the out-of-equilibrium conditions typical of cement hydration. Our approach is based on colloidal particles, precipitating in the pore solution and interacting with effective forces associated to the ionic environment. We present the evolution of the space filling of C-S-H with different particle interactions and compare them with experimental data at different lime concentrations. Moreover, we discuss the structural features of C-S-H in the mesoscale in terms of the scattering intensity. The comparison of our early stage C-S-H structures with small angle neutron scattering (SANS) experiments shows that long range spatial correlations and structural heterogeneties that develop in that early stages of hydration persist also in the hardened paste.

}, doi = {10.1061/978078447934610.1061/9780784479346.069}, author = {Katerina Ioannidou and Enrico Masoero and Pierre E. Levitz and Roland Jean-Marc Pellenq and Emanuela Del Gado}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @article {151, title = {Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials}, journal = {Cement and Concrete Research}, volume = {67}, year = {2015}, month = {Jan-2015}, pages = {271 - 285}, abstract = {

A novel approach for the chemo-mechanical characterization of cement-based materials is presented, which combines the classical grid indentation technique with elemental mapping by scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS). It is illustrated through application to an oil-well cement system with siliceous filler. The characteristic X-rays of major elements (silicon, calcium and aluminum) are measured over the indentation region and mapped back on the indentation points. Measured intensities together with indentation hardness and modulus are considered in a clustering analysis within the framework of Finite Mixture Models with Gaussian component density function. The method is able to successfully isolate the calcium-silica-hydrate gel at the indentation scale from its mixtures with other products of cement hydration and anhydrous phases; thus providing a convenient means to link mechanical response to the calcium-to-silicon ratio quantified independently via X-ray wavelength dispersive spectroscopy. A discussion of uncertainty quantification of the estimated chemo-mechanical properties and phase volume fractions, as well as the effect of chemical observables on phase assessment is also included.

}, issn = {00088846}, doi = {10.1016/j.cemconres.2014.09.001}, author = {Konrad J. Krakowiak and Wilson, William and James, Simon and Musso, Simone and Franz-Josef Ulm} } @proceedings {334, title = {Kinetic Simulations of Cement Creep: Mechanisms from Shear Deformations of Glasses}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete StructuresCONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {555-564}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015, Vienna, AustriaReston, VA}, abstract = {

The logarithmic deviatoric creep of cement paste is a technical and scientific challenge. Transition State Theory (TST) indicates that some nanoscale mechanisms of shear deformation, associated with a specific kind of strain hardening, can explain the type of deviatoric creep observed experimentally in mature cement pastes. To test this possible explanation, we simulate the shear deformations of a colloidal model of cement hydrates at the nanoscale. Results from quasi-static simulations indicate a strain hardening analogous to that postulated by the TST approach. Additional results from oscillatory shear (fatigue) simulations show an increase of deformation with number of loading cycles that is consistent with the observed creep. These findings indicate that nanoscale simulations can improve our current understanding of the mechanisms underlying creep, with potential to go beyond the logarithmic creep and explore the onset of failure during tertiary creep.

}, doi = {10.1061/978078447934610.1061/9780784479346.068}, author = {Enrico Masoero and Mathieu Bauchy and Emanuela Del Gado and Hegoi Manzano and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @proceedings {330, title = {The Meso-Scale Texture of Cement Hydrate Gels: Out-of-Equilibrium Evolution and Thermodynamic Driving}, journal = {10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures CONCREEP 10}, volume = {CONCREEP 10: MECHANICS AND PHYSICS OF CREEP, SHRINKAGE, AND DURABILITY OF CONCRETE AND CONCRETE STRUCTURES}, year = {2015}, month = {Sep-17-2015}, pages = {34-38}, publisher = {American Society of Civil Engineers}, address = {September 21{\textendash}23, 2015 Vienna, AustriaReston, VA}, abstract = {

By the end of cement hydration calcium-silicate-hydrate (C-S-H) gels extends over tens and hundreds of nanometers. Their complex texture affects directly, and to a large extent, the macroscopic hygrothermal and mechanical behavior of cement. Here we review a statistical physics approach recently developed, which allows us to investigate the gel formation under the out-of-equilibrium conditions typical of cement hydration and the role of the nano-scale structure in C\—S\—H mechanics upon hardening. Our investigations have unveiled the role, in the C-S-H gels, of nano-scale structural and mechanical heterogeneities that develop due to the the far-from-equilibrium physico-chemical environment in which the material forms. A subtle interplay between the out-of-equilibrium evolution and the effective interactions emerging between the nano-scale units of the gels at different stages of the hydration process ultimately determines the mesoscale texture of cement hydrates and their material properties.

}, doi = {10.1061/978078447934610.1061/9780784479346.005}, author = {Emanuela Del Gado and Katerina Ioannidou and Enrico Masoero and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip}, editor = {Hellmich, Christian and Pichler, Bernhard and Kollegger, Johann} } @article {150, title = {Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time}, journal = {Cement and Concrete Research}, volume = {67}, year = {2015}, month = {Jan-2015}, pages = {103 - 121}, abstract = {

With ever more challenging (T,p) environments for cementing applications in oil and gas wells, there is a need to identify the fundamental mechanisms of fracture resistant oil well cements. We report results from a multi-technique investigation of behavior and properties of API class G cement and silica-enriched cement systems subjected to hydrothermal curing from 30\ \°C to 200\ \°C; including electron probe microanalysis, X-ray diffraction, thermogravimetry analysis, electron microscopy, neutron scattering (SANS), and fracture scratch testing. The results provide a new insight into the link between system chemistry, micro-texture and micro-fracture toughness. We suggest that the strong correlation found between chemically modulated specific surface and fracture resistance can explain the drop in fracture properties of neat oil-well cements at elevated temperatures; the fracture property enhancement in silica-rich cement systems, between 110\° and 175\ \°C; and the drop in fracture properties of such systems through prolonged curing over 1\ year at 200\ \°C.

Fig.1. Particle size distribution of the silica flour (ground quartz) incorporated{\textellipsis}

Fig.2. Location of the {\textquotedblleft}chemical poles{\textquotedblright} of the cement clinker and cement hydration{\textellipsis}

Fig.3. Simplified schematic of: (a) the cement paste microstructure cured at room{\textellipsis}

Fig.4. A schematic of the effect of adding an extra dimension, Al, to the statistical{\textellipsis}

Fig.5. X-ray powder diffraction spectra with qualitative analysis of the major phases{\textellipsis}

Fig.6. Thermal gravimetric analysis (TGA) carried out on samples cured in the{\textellipsis}

}, issn = {00088846}, doi = {10.1016/j.cemconres.2014.08.008}, author = {Konrad J. Krakowiak and Jeffrey J. Thomas and Musso, Simone and James, Simon and Ange-Therese Akono and Franz-Josef Ulm} } @proceedings {357, title = {Rheology and Micromechanical Analysis of Granular Media Composed of Platy Particles: A Step Toward the DEM Simulation of Clayey Soils}, journal = {15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE) / 8th South American Congress on Rock Mechanics (SCRM)}, volume = {FROM FUNDAMENTALS TO APPLICATIONS IN GEOTECHNICS }, year = {2015}, month = {2015}, pages = {1357-1364}, address = {NOV 15-18 2015 Buenos Aires, ARGENTINA}, abstract = {

This work was carried out in the framework of a larger project devoted
to the micro-mechanical modeling of clayey soils by means of discrete element
simulations. Here, we study the rheology and microstructure of granular media
composed of platy particles. The particles are three-dimensional square plates,
approximated as spheropolyhedra. Several samples composed of particles of
different levels of platyness (related to the ratio of length to thickness) were
numerically prepared and sheared up to large deformations. Specifically, we
revisit and analyze in detail an ordering phenomenon described briefly in a
previous paper [1] and investigate its consequences in terms of the alignment of
particles and cluster formation. We find that particle alignment is strongly
enhanced by the degree of platyness and leads to the formation of face-connected
clusters. Due to dynamics, this spontaneous clustering is a robust characteristic of
granular systems composed of platy particles even in the absence of attraction
forces.

}, doi = {10.3233/978-1-61499-603-3-1357}, author = {Boton, Mauricio and Estrada, Nicolas and Emilien Az{\'e}ma}, editor = {Manzanal, D and Sfriso, AO} } @book {647, title = {Springer Series in Materials ScienceMolecular Dynamics Simulations of Disordered MaterialsFirst-Principles Modeling of Binary Chalcogenides: Recent Accomplishments and New Achievements}, volume = {215}, year = {2015}, pages = {313 - 344}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Cham}, abstract = {

This contribution is focussed on a set of first-principles molecular dynamics results obtained over the past fifteen years for disordered chalcogenides. In the first part, we sketch and review the historical premises underlying research efforts devoted to the understanding of structural properties in liquid and glassy GexSe1-x systems. We stress the importance of selecting well performing exchange-correlation functionals (within density functional theory) to achieve a correct description of short and intermediate range order. In the second part, we provide a specific, comparative example of structural analysis for chalcogenide GeX4 systems differing by the chemical identity of the X atom. We are able to demonstrate that the correct account of differences between the coordination environments of the two corresponding glasses requires system sizes substantially larger than similar to 100 atoms.

}, isbn = {978-3-319-15674-3}, issn = {0933-033X}, doi = {10.1007/978-3-319-15675-010.1007/978-3-319-15675-0_12}, url = {http://link.springer.com/10.1007/978-3-319-15675-0}, author = {Bouzid, A. and Le Roux, S. and Guido Ori and Tugene, Christine and Boero, M. and Carlo Massobrio}, editor = {Carlo Massobrio and Du, Jincheng and Bernasconi, Marco and Salmon, Philip S.} } @book {648, title = {Springer Series in Materials ScienceMolecular Dynamics Simulations of Disordered MaterialsMolecular Modeling of Glassy Surfaces}, volume = {215}, year = {2015}, pages = {345 - 365}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Cham}, abstract = {

Progress in computational materials science has allowed the development of realistic models for a wide range of materials including both crystalline and glassy solids. In recent years, with the growing interest in nanoparticles and porous materials, more attention has been devoted to the design of realistic models of glassy surfaces and finely divided materials. The structural disorder in glassy surfaces, however, poses a major challenge which consists of describing such surfaces using computer simulations. In this paper, we show how atomic-scale simulations can be used to develop and investigate the properties of glassy surfaces. We illustrate how both first principles calculations and classical molecular mechanics can be used to follow the trajectory at finite temperature of these systems, and obtain statistical thermodynamic averages to compare against available experiments. Both glassy oxide (silica) and non-oxide (chalcogenide) surfaces are considered.

}, isbn = {978-3-319-15674-3}, issn = {0933-033X}, doi = {10.1007/978-3-319-15675-010.1007/978-3-319-15675-0_13}, url = {http://link.springer.com/10.1007/978-3-319-15675-0}, author = {Guido Ori and Carlo Massobrio and Bouzid, A. and Benoit A. Coasne}, editor = {Carlo Massobrio and Du, Jincheng and Bernasconi, Marco and Salmon, Philip S.} } @article {180, title = {Structure and Dynamics of Ionic Liquids Confined in Amorphous Porous Chalcogenides}, journal = {Langmuir}, volume = {31}, year = {2015}, month = {Jun-23-2015}, pages = {6742 - 6751}, abstract = {
Abstract Image

Besides the abundant literature on ionic liquids in porous silica and carbon, the confinement of such intriguing liquids in porous chalcogenides has received very little attention. Here, molecular simulation is employed to study the structural and dynamical properties of a typical ionic liquid confined in a realistic molecular model of amorphous chalcogenide with various pore sizes and surface chemistries. Using molecular dynamics in the isobaric\–isothermal (NPT) ensemble, we consider confinement conditions relevant to real samples. Both the structure and self-dynamics of the confined phase are found to depend on the surface-to-volume ratio of the host confining material. Consequently, most properties of the confined ionic liquid can be written as a linear combination of surface and bulk-like contributions, arising from the ions in contact with the surface and the ions in the pore center, respectively. On the other hand, collective dynamical properties such as the ionic conductivity remain close to their bulk counterpart and almost insensitive to pore size and surface chemistry. These results, which are in fair agreement with available experimental data, provide a basis for the development of novel applications using hybrid organic\–inorganic solids consisting of ionic liquids confined in porous chalcogenides.

}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.5b00982}, author = {Guido Ori and Carlo Massobrio and Pradel, Annie and Ribes, Michel and Benoit A. Coasne} } @article {152, title = {Transient dynamics of a 2D granular pile}, journal = {The European Physical Journal E}, volume = {38}, year = {2015}, month = {May-26-2015}, pages = {Article Number: 47}, abstract = {

We investigate by means of Contact Dynamics simulations the transient dynamics of a 2D granular pile set into motion by applying shear velocity during a short time interval to all particles. The spreading dynamics is directly controlled by the input energy whereas in recent studies of column collapse the dynamics scales with the initial potential energy of the column. As in column collapse, we observe a power-law dependence of the runout distance with respect to the input energy with nontrivial exponents. This suggests that the power-law behavior is a generic feature of granular dynamics, and the values of the exponents reflect the distribution of kinetic energy inside the material. We observe two regimes with different values of the exponents: the low-energy regime reflects the destabilization of the pile by the impact with a runout time independent of the input energy whereas the high-energy regime is governed by the input energy. We show that the evolution of the pile in the high-energy regime can be described by a characteristic decay time and the available energy after the pile is destabilized.

https://static-content.springer.com/image/art\%3A10.1140\%2Fepje\%2Fi2015-15047-x/MediaObjects/10189_2015_133_Figa_HTML.gif
}, issn = {1292-8941}, doi = {10.1140/epje/i2015-15047-x}, author = {Patrick Mutabaruka and Krishna Kumar and Kenichi Soga and Farhang Radja{\"\i} and Jean-Yves Delenne} } @article {107, title = {An artificial primitive mimic of the Gramicidin-A channel}, journal = {Nature Communications}, volume = {5}, year = {2014}, month = {Jun-26-2014}, type = {Article}, abstract = {

Gramicidin A (gA) is the simplest known natural channel, and important progress in improving conduction activity has previously been obtained with modified natural gAs. However, simple artificial systems mimicking the gA functions are unknown. Here we show that gA can be mimicked using a simple synthetic triazole or {\textquoteleft}T-channel\&$\#$39; forming compound (TCT), having similar constitutional functions as the natural gAs. As in gA channels, the carbonyl moieties of the TCT, which point toward the T-channel core and surround the transport direction, are solvated by water. The net-dipolar alignment of water molecules along the chiral pore surfaces influences the conduction of protons/ions, envisioned to diffuse along dipolar hydrophilic pathways. Theoretical simulations and experimental assays reveal that the conduction through the T-channel, similar to that in gA, presents proton/water conduction, cation/anion selectivity and large open channel-conductance states. T-channels-associating supramolecular chirality with dipolar water alignment-represent an artificial primitive mimic of gA.

Molecular structures and crystal packing.

Molecular simulations of water molecules and ions confined within T-channel.

Bilayer membrane transport experiments.

Single channel conductance of T-channels under {\textquoteleft}early stage{\textquoteright} conductance records.

}, issn = {2041-1723}, doi = {10.1038/ncomms5142}, author = {Barboiu, Mihail and Le Duc, Yann and Gilles, Arnaud and Pierre-Andre Cazade and Michau, Mathieu and Yves-Marie Legrand and Arie Van Der Lee and Benoit A. Coasne and Parvizi, Paria and Post, Joshua and Fyles, Thomas} } @article {89, title = {Effect of Gas Adsorption on Acoustic Wave Propagation in MFI Zeolite Membrane Materials: Experiment and Molecular Simulation}, journal = {Langmuir}, volume = {30}, year = {2014}, month = {Aug-04-2014}, pages = {10336-10343}, type = {Article}, abstract = {
Abstract Image

The present study reports on the development of a characterization method of porous membrane materials which consists of considering their acoustic properties upon gas adsorption. Using acoustic microscopy experiments and atomistic molecular simulations for helium adsorbed in a silicalite-1 zeolite membrane layer, we showed that acoustic wave propagation could be used, in principle, for controlling the membranes operando. Molecular simulations, which were found to fit experimental data, showed that the compressional modulus of the composite system consisting of silicalite-1 with adsorbed He increases linearly with the He adsorbed amount while its shear modulus remains constant in a large range of applied pressures. These results suggest that the longitudinal and Rayleigh wave velocities (VL and VR) depend on the He adsorbed amount whereas the transverse wave velocity VT remains constant.

}, issn = {0743-7463}, doi = {10.1021/la502182k}, author = {Manga, Etoungh D. and Blasco, Hugues and J. Philippe Da-Costa and Drobek, Martin and Ayral, Andre and Le Clezio, Emmanuel and Despaux, Gilles and Benoit A. Coasne and Julbe, Anne} } @article {273, title = {Effect of size polydispersity versus particle shape in dense granular media}, journal = {Physical Review E}, volume = {90}, year = {2014}, month = {Jul-21-2014}, pages = {Article Number: 012202}, abstract = {

We present a detailed analysis of the morphology of granular systems composed of frictionless pentagonal particles by varying systematically both the size span and particle shape irregularity, which represent two polydispersity parameters of the system. The microstructure is characterized in terms of various statistical descriptors such as global and local packing fractions, radial distribution functions, coordination number, and fraction of floating particles. We find that the packing fraction increases with the two parameters of polydispersity, but the effect of shape polydispersity for all the investigated structural properties is significant only at low size polydispersity where the positional and/or orientational ordering of the particles prevail. We focus in more detail on the class of side/side contacts, which is the interesting feature of our system as compared to a packing of disks. We show that the proportion of such contacts has weak dependence on the polydispersity parameters. The side- side contacts do not percolate but they define clusters of increasing size as a function of size polydispersity and decreasing size as a function of shape polydispersity. The clusters have anisotropic shapes but with a decreasing aspect ratio as polydispersity increases. This feature is argued to be a consequence of strong force chains (forces above the mean), which are mainly captured by side-side contacts. Finally, the force transmission is intrinsically multiscale, with a mean force increasing linearly with particle size.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, issn = {1539-3755}, doi = {10.1103/PhysRevE.90.012202}, author = {Duc-Hanh Nguyen and {\'e}ma, Emilien and Farhang Radja{\"\i} and Philippe Sornay} } @article {275, title = {Initiation of immersed granular avalanches}, journal = {Physical Review E}, volume = {89}, year = {2014}, month = {May-09-2014}, pages = {Article Number: 052203}, abstract = {

By means of coupled molecular dynamics-computational fluid dynamics simulations, we analyze the initiation of avalanches in a granular bed of spherical particles immersed in a viscous fluid and inclined above its angle of repose. In quantitative agreement with experiments, we find that the bed is unstable for a packing fraction below 0.59 but is stabilized above this packing fraction by negative excess pore pressure induced by the effect of dilatancy. From detailed numerical data, we explore the time evolution of shear strain, packing fraction, excess pore pressures, and granular microstructure in this creeplike pressure redistribution regime, and we show that they scale excellently with a characteristic time extracted from a model based on the balance of granular stresses in the presence of a negative excess pressure and its interplay with dilatancy. The cumulative shear strain at failure is found to be ≃ 0.2, in close agreement with the experiments, irrespective of the initial packing fraction and inclination angle. Remarkably, the avalanche is triggered when dilatancy vanishes instantly as a result of fluctuations while the average dilatancy is still positive (expanding bed) with a packing fraction that declines with the initial packing fraction. Another nontrivial feature of this creeplike regime is that, in contrast to dry granular materials, the internal friction angle of the bed at failure is independent of dilatancy but depends on the inclination angle, leading therefore to a nonlinear dependence of the excess pore pressure on the inclination angle. We show that this behavior may be described in terms of the contact network anisotropy, which increases with a nearly constant connectivity and levels off at a value (critical state) that increases with the inclination angle. These features suggest that the behavior of immersed granular materials is controlled not only directly by hydrodynamic forces acting on the particles but also by the influence of the fluid on the granular microstructure.

}, issn = {1539-3755}, doi = {10.1103/PhysRevE.89.052203}, author = {Patrick Mutabaruka and Jean-Yves Delenne and Kenichi Soga and Farhang Radja{\"\i}} } @proceedings {99, title = {Modelling cement at fundamental scales: From atoms to engineering strength and durability}, journal = {Euro-C Conference}, volume = {COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, VOL 1}, year = {2014}, month = {2014}, pages = {139-148}, publisher = {CRC Press-Taylor \& Francis Group}, address = {MAR 24-27, 2014, St Anton am Alberg, AUSTRIA}, abstract = {

The mechanics and rheology of cement pastes are largely determined by the Calcium-Silicate-Hydrate (C-S-H) gel, which is normally the main binding phase. The C-S-H gel is an amorphous material with a nanoscale pore network. Here we consider a model structure of the gel, where a continuous molecular model of non-porous C-S-H is combined with a colloidal model that incorporates the porosity of the gel. Numerical simulations predict mechanical properties and microscopic processes associated with yielding under shear. The proposed model can now be used to extract further properties and to contribute to a broader effort aimed at describing and engineering the multi-scale structure and mechanical behaviour of the cement paste. We finally discuss the opportunities offered by our model with respect to the scientific and technological challenges of modelling and controlling ageing and creep over long time scales.

}, isbn = {978-1-138-02641-4; 978-1-315-76203-6}, doi = {10.1201/b16645-16}, author = {Enrico Masoero and Hamlin M. Jennings and Franz-Josef Ulm and Emanuela Del Gado and Hegoi Manzano and Roland Jean-Marc Pellenq and Sidney Yip}, editor = {Bicanic, N and Mang, H and Meschke, G and DeBorst, R} } @article {650, title = {Molecular dynamics simulation of amorphous HfO 2 for resistive RAM applications}, journal = {Modelling and Simulation in Materials Science and Engineering}, volume = {22}, year = {2014}, month = {Sep-2014}, pages = { Article Number 065006 }, abstract = {

HfO2 is widely investigated as the favoured material for resistive RAM device implementation. The structural features of HfO2 play a fundamental role in the switching mechanisms governing resistive RAM operations, and a comprehensive understanding of the relation between the atomistic properties and final device behaviour is still missing. In addition, despite the fact that ultra-scaled 10 nm resistive RAM will probably be made of amorphous HfO2, a deeper investigation of the structure is necessary. In this paper, the classical molecular dynamics technique was used to investigate the disordered atomic configuration of amorphous HfO2. The influence of density on both the atomistic structure and the diffusion of O species was carefully analysed. The results achieved show that the atomistic structure of an amorphous HfO2 system is strongly affected by the density, and the amorphous system is rearranged in an atomic configuration similar to the crystalline configuration at similar densities. The diffusion of oxygen atoms increases with the decrease of the density, consistent with a less-packed atomic structure which allows for easier movement of this species.

}, issn = {0965-0393}, doi = {10.1088/0965-0393/22/6/065006}, url = {http://stacks.iop.org/0965-0393/22/i=6/a=065006?key=crossref.b7d708e3a43b9124ea539668eee311b0}, author = {Broglia, G and Guido Ori and Larcher, L and Montorsi, M} } @article {70, title = {Multiphase equation of state for carbon addressing high pressures and temperatures}, journal = {Phys Rev. B}, volume = {89}, year = {2014}, month = {Jun-2014}, chapter = {224109}, abstract = {

We present a 5-phase equation of state for elemental carbon which addresses a wide range of density and temperature conditions: 3g/cc\<\ρ\<20g/cc,0K\<T\<\∞. The phases considered are diamond, BC8, simple cubic, simple hexagonal, and the liquid/plasma state. The solid phase free energies are constrained by density functional theory (DFT) calculations. Vibrational contributions to the free energy of each solid phase are treated within the quasiharmonic framework. The liquid free energy model is constrained by fitting to a combination of DFT molecular dynamics performed over the range 10000K\<T\<100000K, and path integral quantum Monte Carlo calculations for T\>100000K (both for \ρ between 3 and 12 g/cc, with select higher- \ρ DFT calculations as well). The liquid free energy model includes an atom-in-jellium approach to account for the effects of ionization due to temperature and pressure in the plasma state, and an ion-thermal model which includes the approach to the ideal gas limit. The precise manner in which the ideal gas limit is reached is greatly constrained by both the highest-temperature DFT data and the path integral data, forcing us to discard an ion-thermal model we had used previously in favor of a new one. Predictions are made for the principal Hugoniot and the room-temperature isotherm, and comparisons are made to recent experimental results.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, doi = {10.1103/PhysRevB.89.224109}, author = {L. X. Benedict and K. P. Driver and S. Hamel and B. Militzer and T. Qi and Alfredo A. Correa and Andres Sa{\`u}l and E. Schwegler} } @article {96, title = {Nano-scale mechanics of colloidal C-S-H gels}, journal = {Soft Matter}, volume = {10}, year = {2014}, month = {Jan-21-2014}, pages = {491-499}, type = {Article}, abstract = {

Gels of calcium-silicate-hydrates (C-S-H) are the glue that is largely responsible for the mechanical properties of cement. Despite their practical relevance, their nano-scale structure and mechanics are still mainly unexplored, because of the difficulties in characterizing them in a complex material like cement. We propose a colloidal model to investigate the gel mechanics emerging in the critical range of length-scales from several tens to hundreds of nanometers. We show that the size polydispersity of the hydrates and size-dependent effective interactions can explain the mechanical heterogeneities detected in nano-indentation experiments. We also show how these features control the arising of irreversible structural rearrangements under deformation, which are good candidates as nano-scale mechanisms underlying mechanical aging and slow structural relaxation in the gels.

Graphical abstract: Nano-scale mechanics of colloidal C{\textendash}S{\textendash}H gels
}, issn = {1744-683X}, doi = {10.1039/c3sm51815a}, author = {Enrico Masoero and Emanuela Del Gado and Roland Jean-Marc Pellenq and Sidney Yip and Franz-Josef Ulm} } @proceedings {348, title = {Pavement infrastructures footprint: The impact of pavement properties on vehicle fuel consumption}, journal = {Euro-C Conference}, volume = {COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES}, year = {2014}, month = {Mar-2014}, pages = {1051-1058}, address = {MAR 24-27 2014 St Anton am Alberg, AUSTRIA}, abstract = {

A novel mechanistic model based on an infinite beam on elastic foundation is developed to
quantify the impact of pavement structural and material properties on pavement deflection and consequently on
vehicle fuel consumption. The model can also account for the effect of temperature and vehicle speed on fuel
consumption. A simplified expression for evaluating the energy dissipation for practical purposes is proposed
and used to investigate the impact of various pavement design systems on fuel consumption. GPS (General Pave-
ment Studies) sections from the FHWA\’s Long Term Pavement Performance program (FHWA 2011) are used
for this study. These sections consist of asphalt concrete (AC), portland cement concrete (PCC) and composite
pavements. The model quantifies the impact of temperature and vehicle speed on the fuel consumption and
confirms that those impacts are negligible for PCC and significant for AC pavements due to their viscoelasticity.

}, url = {https://cshub.mit.edu/sites/default/files/documents/louhghalam-Euro-C-2014.pdf}, author = {Arghavan Louhghalam and Mehdi Akbarian and Franz-Josef Ulm}, editor = {Bicanic, N and Mang, H and Meschke, G} } @proceedings {100, title = {Poro-chemo-fracture-mechanics ... bottom-up: Application to risk of fracture design of oil and gas cement sheath at early ages}, journal = {Euro-C Conference}, volume = {COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, VOL 1 }, year = {2014}, month = {Jan-2014}, pages = {61-67}, publisher = {CRC PRESS-TAYLOR \& FRANCIS GROUP}, address = {MAR 24-27, 2014, St Anton am Alberg, AUSTRIA}, abstract = {

With ever more challenging (T, p) environments for cementing applications in oil and gas wells, there is a need to change the classical paradigm of constitutive modeling of the early-age behavior of cementitious materials in oil-and gas well applications. Herein, we propose a bottom-up approach, which starts at the molecular scale of calcium-silicate-hydrates (C-S-H), and propagates this understanding via incremental poroelastic upscaling methods to the meso-and macroscale, and ultimately to the scale of engineering applications. With a clear focus on engineering risk-of-fracture evaluations, we show how to integrate this bottom-up approach with fracture mechanics.

}, isbn = {978-1-138-02641-4; 978-1-315-76203-6}, doi = {10.1201/b16645-8}, author = {Franz-Josef Ulm and Muhannad Abuhaikal and Thomas Alexander Petersen and Roland Jean-Marc Pellenq}, editor = {Bicanic, N and Mang, H and Meschke, G and DeBorst, R} } @proceedings {345, title = {Shear flow of dense granular suspensions by computer simulations}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Apr-2014}, pages = {467-472}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

We analyze the shear flow of dense granular materials composed of circular particles immersed in a viscous fluid by means of Molecular Dynamics simulations interfaced with the Lattice Boltzmann Method. A homogeneous flow of the suspension is obtained through periodic boundary conditions and by directly applying a confining pressure on the granular phase and shearing the fluid phase. The stead-state rheology can be described in terms of effective friction coefficient and packing fraction of the suspension as a function of the ratio of viscous shear stress to confining pressure (frictional description), on one hand, and in terms of normal and shear viscosities of the suspension as a function of the packing fraction (viscous description), on the other hand. We show that the simulation data are consistent with both descriptions and in close agreement with the corresponding scaling laws observed in recent experiments.

}, url = {http://prodinra.inra.fr/record/369542}, author = {L. Amarsid and Patrick Mutabaruka and Jean-Yves Delenne}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin} } @article {261, title = {A soft matter in construction {\textendash} Statistical physics approach to formation and mechanics of C{\textendash}S{\textendash}H gels in cement}, journal = {The European Physical Journal Special Topics}, volume = {223}, year = {2014}, month = {Oct-2014}, pages = {2285 - 2295}, abstract = {

Calcium-silicate hydrate (C-S-H) is the main binding agent in cement and concrete. It forms at the beginning of cement hydration, it progressively densifies as cement hardens and is ultimately responsible of concrete performances. This hydration product is a cohesive nano-scale gel, whose structure and mechanics are still poorly understood, in spite of its practical importance. Here we review some of the open questions for this fascinating material and a statistical physics approach recently developed, which allows us to investigate the gel formation under the out-of-equilibrium conditions typical of cement hydration and the role of the nano-scale structure in C-S-H mechanics upon hardening. Our approach unveils how some distinctive features of the kinetics of cement hydration can be related to changes in the morphology of the gels and elucidates the role of nano-scale mechanical heterogeneities in the hardened C-S-H.

}, issn = {1951-6355}, doi = {10.1140/epjst/e2014-02264-1}, author = {Emanuela Del Gado and Katerina Ioannidou and Enrico Masoero and Alain Baronnet and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip} } @article {310, title = {Stimuli-Responsive Cement-Reinforced Rubber}, journal = {ACS Applied Materials \& Interfaces}, volume = {6}, year = {2014}, month = {May-14-2014}, pages = {6962 - 6968}, abstract = {
Abstract Image

In this work, we report the successful development of a cement\–rubber reactive composite with reversible mechanical properties. Initially, the composite behaves like rubber containing inert filler, but when exposed to water, it increases in volume and reaches a stiffness that is intermediate between that of hydrogenated nitrile butadiene rubber (HNBR) and hydrated cement, while maintaining a relatively large ductility characteristic of rubber. After drying, the modulus increases even further up to 400 MPa. Wet/drying cycles prove that the elastic modulus can reversibly change between 150 and 400 MPa. Utilizing attenuated total reflection Fourier transform infrared spectroscopy), we demonstrate that the high pH produced by the hydration of cement triggers the hydrolysis of the rubber nitrile groups into carboxylate anions. Thus, the salt bridges, generated between the carboxylate anions of the elastomer and the cations of the filler, are responsible for the reversible variations in volume and elastic modulus of the composite as a consequence of environmental moisture exposure. These results reveal that cement nanoparticles can successfully be used to accomplish a twofold task: (a) achieve an original postpolymerization modification that allows one to work with carboxylate HNBR (HXNBR) not obtained by direct copolymerization of carboxylate monomers with butadiene, and (b) synthesize a stimuli-responsive polymeric composite. This new type of material, having an ideal behavior for sealing application, could be used as an alternative to cement for oil field zonal isolation applications.

}, issn = {1944-8244}, doi = {10.1021/am500774k}, author = {Musso, Simone and Robisson, Agathe and Sudeep Maheshwar and Franz-Josef Ulm} } @article {86, title = {Surface of glassy GeS2: A model based on a first-principles approach}, journal = {Physical Review B}, volume = {90}, year = {2014}, month = {Jul-2014}, type = {Article}, chapter = {045423}, abstract = {

First-principles calculations within the framework of the density functional theory are used to construct realistic models for the surface of glassy GeS2(g\−GeS2). Both calculations at T=0 K and at finite temperature (T=300 K) are considered. This allows for a comparison between the structural and electronic properties of surface and bulk g\−GeS2. Although the g\−GeS2 surface recovers the main tetrahedral structural motif of bulk g\−GeS2, the number of fourfold coordinated Ge atoms and twofold coordinated S atoms is smaller than in the bulk. On the contrary, the surface system features a larger content of overcoordinated S atoms and threefold coordinated Ge atoms. This effect is more important for the g\−GeS2 surface relaxed at 0 K. Maximally localized Wannier functions (WF) are used to inspect the nature of the chemical bonds of the structural units present at the g\−GeS2 surface. We compare the ability of several charge derivation methods to capture the atomic charge variations induced by a coordination change. Our estimate for the charges allows exploiting the first-principles results as a data base to construct a reliable interatomic force field.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, issn = {1098-0121}, doi = {10.1103/PhysRevB.90.045423}, author = {Guido Ori and Carlo Massobrio and Bouzid, A. and Boero, M. and Benoit A. Coasne} } @article {35, title = {Adsorption of Aromatic Hydrocarbon Molecules at the Surface of Ice, As Seen by Grand Canonical Monte Carlo Simulation}, journal = {The Journal of Physical Chemistry C}, volume = {117}, year = {2013}, month = {Apr-2013}, pages = {6719{\textendash}6729}, abstract = {
Abstract Image

The adsorption of four aromatic hydrocarbon compounds, benzene, naphthalene, anthracene, and phenanthrene, at the surface of Ih ice is investigated by grand canonical Monte Carlo (GCMC) computer simulation under tropospheric conditions at 200 K. By systematic variation of the value of adsorbate chemical potential in the simulations, the adsorption isotherms are determined. It is found that adsorption follows the Langmuir mechanism only up to a rather low relative pressure value in every case. In this range specific surface sites, called \α sites, to which adsorbate molecules can be bound particularly strongly in specific orientation, are occupied. In these \α sites, presumably the dangling OH bonds of the ice surface form O\–H....\π-type hydrogen bonds with the delocalized \π electrons of the adsorbed aromatic molecule lying parallel with the ice surface. Once these \α sites are saturated, lateral interactions become increasingly important, leading to large fluctuations of the lateral density of the adsorption layer and an increasing deviation of the adsorption isotherm from the Langmuir shape. The adsorption layer is found to be strictly monomolecular and even unsaturated in every case, as condensation well precedes the saturation of this monolayer for all four aromatic adsorbates considered in this study.

}, doi = {10.1021/jp401532x}, author = {M{\'e}sz{\'a}r, Zsuzsanna E and Gy{\"o}rgy Hantal and Picaud, Sylvain and Jedlovszky, P{\'a}l} } @proceedings {366, title = {AIP Conference ProceedingsTumbling sandpiles in a fluid}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jul-2013}, pages = {662-665}, publisher = {AIP}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

By means of contact dynamics simulations interfaced with computational fluid dynamics, we analyze the effect of a suspending fluid on the dynamics of collapse and spread of a granular column. We find that the runout distance increases as a power law with the aspect ratio of the column and, for a given aspect ratio, it may be the same in the grain-inertial and fluid-inertial regimes but with considerably longer duration in the latter case. We show that, in both viscous and fluid-inertial regimes, this behavior results from compensation between two effects of the fluid: 1) reduction of the kinetic energy during collapse and 2) enhancement of the flow by lubrication during spread.

}, doi = {10.1063/1.4812018}, author = {Farhang Radja{\"\i} and Vincent Topin and Perales, F. and Yann Monerie}, editor = {Yu, A and Dong, K and Yang, R} } @article {77, title = {First-principles molecular dynamics study of glassy GeS2: Atomic structure and bonding properties}, journal = {Physical Review B}, volume = {88}, year = {2013}, month = {Nov-04-2013}, type = {Article}, abstract = {

The structure of glassy GeS2 is studied in the framework of density functional theory, by using a fully self-consistent first-principles molecular dynamics (FPMD) scheme. A comparative analysis is performed with previous molecular dynamics data obtained within the Harris functional (HFMD) total energy approach. The calculated total neutron structure factor exhibits an unprecedented agreement with the experimental counterpart. In particular, the height of the first sharp diffraction peak (FSDP) improves considerably upon the HFMD results. Both the Ge and the S subnetworks are affected by a consistent number of miscoordinations, coexisting with the main tetrahedral structural motif. Glassy GeS2 features a short-range order quite similar to the one found in glassy GeSe2, a notable exception being the larger number of edge-sharing connections. An electronic structure localization analysis, based on the Wannier functions formalism, provides evidence of a more enhanced ionic character in glassy GeS2 when compared to glassy GeS2.

}, issn = {1098-0121}, doi = {10.1103/PhysRevB.88.174201}, author = {Celino, M. and Le Roux, S. and Guido Ori and Benoit A. Coasne and Bouzid, A. and Boero, M. and Carlo Massobrio} } @proceedings {370, title = {GRANULAR SLUMPING IN A FLUID : FOCUS ON RUNOUT DISTANCES}, journal = {3rd International Conference on Particle-based Methods}, volume = {PARTICLE-BASED METHODS III: FUNDAMENTALS AND APPLICATIONS}, year = {2013}, month = {Sept-2013}, pages = {115-123}, address = {SEP 18-20 2013 Stuttgart, GERMANY}, author = {Vincent Topin and Yann Monerie and Perales, F.}, editor = {Bischoff, M and Ramm, E and Onate, E} } @article {25, title = {Large pressure enhancements in confined phases: effect of surface chemistry and roughness}, journal = {J. Chem. Phys.}, volume = {139}, year = {2013}, month = {Oct-10-2013}, chapter = {144701}, abstract = {

Experiments and simulations both suggest that the pressure experienced by an adsorbed phase confined within a carbon nanoporous material can be several orders of magnitude larger than the bulk phase pressure in equilibrium with the system. To investigate this pressure enhancement, we report a molecular-simulation study of the pressure tensor of argon confined in slit-shaped nanopores with walls of various models, including carbon and silica materials. We show that the pressure is strongly enhanced by confinement, arising from the effect of strongly attractive wall forces; confinement within purely repulsive walls does not lead to such enhanced pressures. Simulations with both the Lennard-Jones and Barker-Fisher-Watts intermolecular potentials for argon-argon interactions give rise to similar results. We also show that an increase in the wall roughness significantly decreases the in-pore pressure due to its influence on the structure of the adsorbate. Finally, we demonstrate that the pressures calculated from the mechanical (direct pressure tensor calculations) and the thermodynamic (volume perturbation method) routes yield almost identical results, suggesting that both methods can be used to calculate the local pressure tensor components in the case of these planar geometries.

Image of FIG. 1.
Image of FIG. 2.
Image of FIG. 3.
Image of FIG. 4.
}, doi = {10.1063/1.4824125}, author = {Yun Long and Jeremy C. Palmer and Benoit A. Coasne and Malgorzata Sliwinska-Bartkowiak and George Jackson and Erich A. Mueller and Keith E. Gubbins} } @article {103, title = {On the molecular origin of high-pressure effects in nanoconfinement: The role of surface chemistry and roughness}, journal = {Journal of Chemical Physics}, volume = {139}, year = {2013}, month = {Oct-14-2013}, type = {Article}, abstract = {

Experiments and simulations both suggest that the pressure experienced by an adsorbed phase confined within a carbon nanoporous material can be several orders of magnitude larger than the bulk phase pressure in equilibrium with the system. To investigate this pressure enhancement, we report a molecular-simulation study of the pressure tensor of argon confined in slit-shaped nanopores with walls of various models, including carbon and silica materials. We show that the pressure is strongly enhanced by confinement, arising from the effect of strongly attractive wall forces; confinement within purely repulsive walls does not lead to such enhanced pressures. Simulations with both the Lennard-Jones and Barker-Fisher-Watts intermolecular potentials for argon-argon interactions give rise to similar results. We also show that an increase in the wall roughness significantly decreases the in-pore pressure due to its influence on the structure of the adsorbate. Finally, we demonstrate that the pressures calculated from the mechanical (direct pressure tensor calculations) and the thermodynamic (volume perturbation method) routes yield almost identical results, suggesting that both methods can be used to calculate the local pressure tensor components in the case of these planar geometries. (C) 2013 AIP Publishing LLC.

}, issn = {0021-9606}, doi = {10.1063/1.4824125}, author = {Yun Long and Jeremy C. Palmer and Benoit A. Coasne and Malgorzata Sliwinska-Bartkowiak and George Jackson and Erich A. Mueller and Keith E. Gubbins} } @article {219, title = {Reactive elastomeric composites: When rubber meets cement}, journal = {Composites Science and Technology}, volume = {75}, year = {2013}, month = {Feb-11-2013}, pages = {77 - 83}, abstract = {

This paper describes a novel reactive composite material comprised of hydrogenated nitrile butadiene rubber (HNBR) compounded with slag cement. The composite initially looks and behaves like rubber, but when exposed to water it simultaneously swells and stiffens due to hydration of the cement component. The material eventually reaches a stiffness that is intermediate between that of HNBR and hydrated cement, while maintaining a relatively large ductility that is more characteristic of rubber. This behavior, which is ideal for sealing applications, differentiates this material from conventional swellable materials that become less stiff upon swelling. The development of this new type of material was motivated by the requirements of oilfield zonal isolation, where alternatives to cement are needed for some challenging sealing applications. A mechanism for the swelling and stiffening of the reactive composite is proposed: water diffuses into the HNBR matrix and is converted to bound water through hydration reactions with the cement, causing the effective solid filler content of the composite to increase. A model is proposed that treats the composite as a cellular solid with a continuous filler phase (hydrated cement). This model is able to reproduce the observed increase in the elastic modulus with time during exposure to water.

Elastic modulus ratio (current/initial) as a function of swelling, for HNBR ...

Kinetics of swelling of all three materials during approximately 1month of ...

Evolution of the elastic modulus of all three materials during approximately ...

Tensile stress{\textendash}strain curves for HNBR-cement (61{\textendash}39\% by volume, pre-exposure) ...

Schematic of the hydration process occurring inside the HNBR-cement material, ...

SEM images of HNBR-cement material before (left) and after (right) hydration. It ...

}, issn = {02663538}, doi = {10.1016/j.compscitech.2012.11.012}, author = {Robisson, Agathe and Sudeep Maheshwar and Musso, Simone and Jeffrey J. Thomas and Auzerais, Francois M. and Han, Dingzhi and Qu, Meng and Franz-Josef Ulm} } @article {60, title = {Simple views on surface stress and surface energy concepts}, journal = {Advances in Natural Sciences: Nanoscience and Nanotechnology}, volume = {5}, year = {2013}, month = {Nov-27-2013}, pages = {013002}, abstract = {

Some aspects of the thermodynamics and mechanics of solid surfaces, in particular with respect to surface stress and surface energy, are reviewed. The purpose is to enlighten the deep differences between these two physical quantities. We consider successively the case of atomic flat surfaces and the case of vicinal surfaces characterized by surface stress discontinuities. Finally, experimental examples, concerning Si surfaces, are described.

}, doi = {10.1088/2043-6262/5/1/013002}, author = {M{\"u}ller, Pierre and Andres Sa{\`u}l and Leroy, Fr{\'e}d{\'e}ric} } @conference {36, title = {Water Isotherms, Shrinkage and Creep of Cement Paste: Hypotheses, Models and Experiments}, booktitle = {Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Zdenek P. Ba{\.z}ant}, year = {2013}, month = {Sep-25-2013}, publisher = {ASCE Publications}, organization = {ASCE Publications}, abstract = {

Cement paste has a complex mesoscale structure, and small changes in its pore network potentially cause large variation in measurements such as the water isotherm (also nitrogen). We deconvolute the water isotherm with the help of advanced computational techniques, hypotheses, and a re-examination of published data. The pore system is divided into four different categories, each containing water with its own physical properties. By viewing the highly interdependent roles of water in each of the pore categories as a system, new insights are gained regarding possible mechanisms that control drying, shrinkage, and creep, and experimental strategies for verification.

}, doi = {10.1061/9780784413111.015}, author = {Hamlin M. Jennings and Enrico Masoero and Pinson, Matthew B and Strekalova, Elena G and Patrick A Bonnaud and Hegoi Manzano and Qing Ji and Jeffrey J. Thomas and Roland Jean-Marc Pellenq and Franz-Josef Ulm and others} } @article {216, title = {Water self-diffusion at the surface of silica glasses: effect of hydrophilic to hydrophobic transition}, journal = {Molecular Physics}, volume = {111}, year = {2013}, month = {Nov-2013}, pages = {3410 - 3417}, abstract = {

We study water dynamics at a silica aqueous interface. Both hydrophilic (hydroxylated) surfaces and hydrophobic surfaces (dehydroxylated upon irradiation) have been generated from atomistic simulations. A new method for the calculation of the normal self-diffusion coefficients based on the calculation of mean first passage times is proposed. It uses the Smoluchowski theory of Brownian motion and it takes proper account of the layering of the molecules. In the case of parallel self-diffusion coefficients, a decrease is found compared to the bulk values. It can be described in terms of hydrodynamic boundary conditions induced by the surface confinement. This hydrodynamic explanation is not enough to interpret the case of normal self-diffusion coefficients for which an important diminution is found. Normal self-diffusion coefficients appear to depend strongly on the hydrophilicity of the surface. They tend towards their bulk value only at long distances from the surfaces. The first layer of water molecules is found to be partially adsorbed.

}, issn = {0026-8976}, doi = {10.1080/00268976.2013.861084}, author = {Bertrand Siboulet and Molina, J. and Benoit A. Coasne and Turq, P. and Jean-Francois Dufreche} } @article {294, title = {Collapse Dynamics and Runout of Dense Granular Materials in a Fluid}, journal = {Physical Review Letters}, volume = {109}, year = {2012}, month = {Nov-02-2012}, pages = {Article Number: 188001}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.109.188001}, author = {Vincent Topin and Yann Monerie and Perales, F. and Farhang Radja{\"\i}} } @article {57, title = {Confined water dissociation in microporous defective silicates: Mechanism, dipole distribution, and impact on substrate properties}, journal = {Journal of the American Chemical Society}, volume = {134}, year = {2012}, month = {Feb-01-2012}, pages = {2208{\textendash}2215}, abstract = {
Abstract Image

Interest in microporous materials has risen in recent years, as they offer a confined environment that is optimal to enhance chemical reactions. Calcium silicate hydrate (C-S-H) gel, the main component of cement, presents a layered structure with sub-nanometer-size disordered pores filled with water and cations. The size of the pores and the hydrophilicity of the environment make C-S-H gel an excellent system to study the possibility of confined water reactions. To investigate it, we have performed molecular dynamics simulations using the ReaxFF force field. The results show that water does dissociate to form hydroxyl groups. We have analyzed the water dissociation mechanism, as well as the changes in the structure and water affinity of the C-S-H matrix and water polarization, comparing the results with the behavior of water in a defective zeolite. Finally, we establish a relationship between water dissociation in C-S-H gel and the increase of hardness due to a transformation from a two- to a three-dimensional structure.

}, doi = {10.1021/ja209152n}, author = {Hegoi Manzano and Moeini, Sina and Marinelli, Francis and Adri CT Van Duin and Franz-Josef Ulm and Roland Jean-Marc Pellenq} } @article {51, title = {Hydration of calcium oxide surface predicted by reactive force field molecular dynamics}, journal = {Langmuir}, volume = {28}, year = {2012}, month = {Mar-06-2012}, pages = {4187{\textendash}4197}, abstract = {
Abstract Image

In this work, we present the parametrization of Ca\–O/H interactions within the reactive force field ReaxFF, and its application to study the hydration of calcium oxide surface. The force field has been fitted using density functional theory calculations on gas phase calcium\–water clusters, calcium oxide bulk and surface properties, calcium hydroxide, bcc and fcc Ca, and proton transfer reactions in the presence of calcium. Then, the reactive force field has been used to study the hydration of the calcium oxide {001} surface with different water contents. Calcium oxide is used as a catalyzer in many applications such as CO2 sequestration and biodiesel production, and the degree of surface hydroxylation is a key factor in its catalytic performance. The results show that the water dissociates very fast on CaO {001} bare surfaces without any defect or vacancy. The surface structure is maintained up to a certain amount of water, after which the surface undergoes a structural rearrangement, becoming a disordered calcium hydroxyl layer. This transformation is the most probable reason for the CaO catalytic activity decrease.

}, doi = {10.1021/la204338m}, author = {Hegoi Manzano and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Markus J Buehler and Adri CT Van Duin} } @article {299, title = {Mechanistic Approach to Pavement-Vehicle Interaction and Its Impact on Life-Cycle Assessment}, journal = {Transportation Research Record: Journal of the Transportation Research Board}, year = {2012}, month = {Dec-2012}, pages = {171 - 179}, abstract = {

The accuracy and the comprehensiveness of any pavement life-cycle assessment are limited by the ability of the supporting science to quantify the environmental impact. Pavement-vehicle interaction represents a significant knowledge gap that has important implications for many pavement life-cycle assessment studies. In the current study, the authors assumed that a mechanistic model that linked pavement structure and properties to fuel consumption could contribute to closing the uncertainty gap of pavement-vehicle interaction in life-cycle assessment of pavements. The simplest mechanistic pavement model, a Bernoulli-Euler beam on a viscoelastic foundation subjected to a moving load, was considered. Wave propagation properties derived from falling weight deflectometer time history data of FHWA\&$\#$39;s Long-Term Pavement Performance program were used to calibrate top-layer and substrate moduli for various asphalt and concrete systems. The model was validated against recorded deflection data. The mechanistic response was used to determine gradient force and rolling resistance to link deflection to vehicle fuel consumption. A comparison with independent field data provided realistic order-of-magnitude estimates of fuel consumption related to pavement-vehicle interaction as predicted by the model.

}, issn = {0361-1981}, doi = {10.3141/2306-20}, author = {Mehdi Akbarian and Moeini-Ardakani, Seyed and Franz-Josef Ulm and Nazzal, Munir} } @article {48, title = {Nanostructure and nanomechanics of cement: polydisperse colloidal packing}, journal = {Physical review letters}, volume = {109}, year = {2012}, month = {Oct-10-2012}, pages = { Article Number: 155503}, abstract = {

Cement setting and cohesion are governed by the precipitation and growth of calcium-silicate-hydrate, through a complex evolution of microstructure. A colloidal model to describe nucleation, packing, and rigidity of calcium-silicate-hydrate aggregates is proposed. Polydispersity and particle size dependent cohesion strength combine to produce a spectrum of packing fractions and of corresponding elastic properties that can be tested against nanoindentation experiments. Implications regarding plastic deformations and reconciling current structural characterizations are discussed.

Figure

Figure

Figure

}, doi = {10.1103/PhysRevLett.109.155503}, author = {Enrico Masoero and Emanuela Del Gado and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Sidney Yip} } @article {58, title = {Structure and properties of nanoscale materials: theory and atomistic computer simulation}, journal = {International Journal of Nanotechnology}, volume = {9}, year = {2012}, month = {2012}, pages = {576{\textendash}604}, abstract = {

We present a review of a few research topics developed within the \"Theory and Atomistic Computer Simulation\" Department at CINaM. The bottom line of the scientific activity is to use up\–to\–date theoretical and computer simulation techniques to address physics and materials science problems, often at the nanometric scale, in close contact with experimental groups. It ranges from the study of the structure and properties of molecular systems for organic electronics to metallic clusters and alloys, magnetic oxides, nuclear fuels and carbon\–based nanostructures. These studies are motivated by fundamental research questions as well as more applied goals including environmental and energy issues, or information technologies. This broad spectrum of activities requires a large range of techniques, from theory and ab initio calculations to semi\–empirical models incorporated in Monte Carlo or molecular dynamics simulations.

}, doi = {10.1504/IJNT.2012.045335 }, author = {Christophe Bichara and Marsal, P and Mottet, C and Roland Jean-Marc Pellenq and F. Ribeiro and Andres Sa{\`u}l and G. Tr{\'e}glia and Weissker, H{\textendash}Ch} } @article {295, title = {Tensile strength and fracture of cemented granular aggregates}, journal = {The European Physical Journal E}, volume = {35}, year = {2012}, month = {Nov-2012}, pages = { Article Number: 117}, abstract = {

Cemented granular aggregates include a broad class of geomaterials such as sedimentary rocks and some biomaterials such as the wheat endosperm. We present a 3D lattice element method for the simulation of such materials, modeled as a jammed assembly of particles bound together by a matrix partially filling the interstitial space. From extensive simulation data, we analyze the mechanical properties of aggregates subjected to tensile loading as a function of matrix volume fraction and particle-matrix adhesion. We observe a linear elastic behavior followed by a brutal failure along a fracture surface. The effective stiffness before failure increases almost linearly with the matrix volume fraction. We show that the tensile strength of the aggregates increases with both the increasing tensile strength at the particle-matrix interface and decreasing stress concentration as a function of matrix volume fraction. The proportion of broken bonds in the particle phase reveals a range of values of the particle-matrix adhesion and matrix volume fraction for which the cracks bypass the particles and hence no particle damage occurs. This limit is shown to depend on the relative toughness of the particle-matrix interface with respect to the particles.

}, issn = {1292-8941}, doi = {10.1140/epje/i2012-12117-7}, author = {Rafik Aff{\`e}s and Jean-Yves Delenne and Yann Monerie and Farhang Radja{\"\i} and Vincent Topin} } @article {55, title = {Understanding and Controlling the Reactivity of the Calcium Silicate phases from First Principles}, journal = {Chemistry of Materials}, volume = {24}, year = {2012}, month = {Apr-10-2012}, pages = {1262{\textendash}1267}, abstract = {
Abstract Image

First principles calculations are employed to provide a fundamental understanding of the relationship between the reactivity of synthetic calcium silicate phases and their electronic structure. Our aim is to shed light on the wide range of hydration kinetics observed in different phases of calcium silicate. For example, while the dicalcium silicate (Ca2SiO4) phase slowly reacts with water, the tricalcium silicate (Ca3SiO5) shows much faster hydration kinetics. We show that the high reactivity of Ca3SiO5 is mainly related to the reactive sites around its more ionic oxygen atoms. Ca2SiO4 does not contain these types of oxygen atoms, although experiments suggest that impurities may play a role in changing the reactivity of these materials. We analyze the electronic structure of a wide range of possible substitutions in both Ca3SiO5 and Ca2SiO4 and show that while the influence of different types of impurities on structural properties is similar, their effect on reactivity is very different. Our calculations suggest that the variation of electronic structure is mainly related to the formation of new hybridized orbitals and the charge exchange between the impurity atoms and the bulk material. The charge localization upon introducing impurities is quantified to predict candidate substitutions that could increase the reactivity of Ca2SiO4, which would broaden the applicability of this lower temperature and thus less costly and energetically less demanding phase.

}, doi = {10.1021/cm203127m}, author = {Engin Durgun and Hegoi Manzano and Roland Jean-Marc Pellenq and Jeffrey C Grossman} } @proceedings {356, title = {Compressive strength of an unsaturated granular material during cementation}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {308 - 311}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

The cohesive behaviour of unsaturated granular materials is due to the presence of cohesive bonds between grains. These bonds can have various physico-chemical characteristics and may evolve with environmental conditions. We study the case of a granular material partially saturated by an aqueous solution. The bonds are thus initially of capillary type and the mechanical strength is weak. At low relative humidity, the phase change of water involves crystallization of the solute at the contact points between grains, generating thus solid bonds. The mechanical strength of the material is then enhanced. An experimental study of the evolution of the mechanical strength during crystallization of the solute shows clearly the transition from capillary regime to cemented regime. This transition is not correlated with the mass of the crystallized solute, but rather with the residual degree of saturation. This behavior is analyzed here in the light of discrete element simulations. We introduce a local cohesion law that accounts for transition from capillary to cemented bonding. This law is formulated in terms of the degree of crystallization as a result of the evaporation of water at the boundary of the sample. The cohesion of the packing is initially of capillary type. A crystallization front then spreads from the sample boundaries to the center of the sample, and the strength increases as a result. Uniaxial compression allows us to determine the strength at different times. The numerical strength agrees well with the experimental data, and reveals strength enhancement as the solute crystallizes, as well as the transition from capillary to cementation regime.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.021}, author = {Jean-Yves Delenne and Souli{\'e}, Fabien and Moulay Sa{\"\i}d El Youssoufi and Farhang Radja{\"\i}} } @article {291, title = {Impact of Chemical Impurities on the Crystalline Cement Clinker Phases Determined by Atomistic Simulations}, journal = {Crystal Growth \& Design}, volume = {11}, year = {2011}, month = {Jul-2011}, pages = {2964 - 2972}, abstract = {
Abstract Image

The presence of chemical substitutions is believed to play a crucial role in the hydration reactions, structure, and elastic properties of cement clinker phases. Hence, substitutions are of great technological interest, as more efficient production of cement clinkers would result in a reduction of CO2 emissions, as well as possible economic benefits. Here we use a combination of classical and quantum mechanical simulation methods to study the detailed physicochemical changes of the clinker phases alite (Ca3SiO5) and belite (Ca2SiO4) when Mg2+, Al3+ and Fe3+ guest ions are incorporated into their structure. Using classical force field methods, we considered random substitutions among possible sites and different compositions in order to identify the preferential substitution sites on the crystalline structures. Then, the resulting structural changes that take place to accommodate the guest ions are investigated and discussed in detail. Using quantum mechanical density functional theory calculations the electronic structure of representative configurations has been computed to determine the potential impact of impurities on the reactivity.

}, issn = {1528-7483}, doi = {10.1021/cg200212c}, author = {Hegoi Manzano and Engin Durgun and Mohammad Javad Abdolhosseini Qomi and Franz-Josef Ulm and Roland Jean-Marc Pellenq and Jeffrey C Grossman} } @proceedings {352, title = {Modeling Porous Granular Aggregates}, journal = {9th International Workshop on Buifurcation and Degradation in Geomaterials (IWBDG 2011)}, volume = {Springer Series in Geomechanics and Geoengineering - ADVANCES IN BIFURCATION AND DEGRADATION IN GEOMATERIALS}, year = {2011}, month = {May-28-2011}, pages = {249 - 254}, publisher = {Springer Netherlands}, address = {MAY 23-26 2011 Porquerolles, FRANCE}, abstract = {

We rely on 3D simulations based on the Lattice Element Method (LEM) to analyze the failure of porous granular aggregates under tensile loading. We investigate crack growth by considering the number of broken bonds in the particle phase as a function of the matrix volume fraction and particle-matrix adhesion. Three regimes are evidenced, corresponding to no particle damage, particle abrasion and particle fragmentation, respectively. We also show that the probability density of strong stresses falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. Decreasing the matrix volume fraction leads to increasingly broader stress distribution and hence a higher stress concentration. Our findings are in agreement with 2D results previously reported in the literature.

}, isbn = {978-94-007-1420-5}, issn = {1866-8755}, doi = {10.1007/978-94-007-1421-2_32}, author = {Rafik Aff{\`e}s and Vincent Topin and Jean-Yves Delenne and Yann Monerie}, editor = {St{\'e}phane Bonelli and Dascalu, Cristian and Fran{\c c}ois Nicot} } @proceedings {353, title = {Onset of Immersed Granular Avalanches by DEM-LBM Approach}, journal = {9th International Workshop on Buifurcation and Degradation in Geomaterials (IWBDG 2011)}, volume = {Springer Series in Geomechanics and Geoengineering - ADVANCES IN BIFURCATION AND DEGRADATION IN GEOMATERIALS}, year = {2011}, month = {May-28-2011}, pages = {109 - 115}, publisher = {Springer Netherlands}, address = {MAY 23-26 2011 Porquerolles, FRANCE}, abstract = {

We present 3D grain-fluid simulations based on the discrete element method interfaced with the lattice Boltzmann method and applied to investigate the initiation of underwater granular flows. We prepare granular beds of 800 spherical grains with different values of the initial solid fraction in a biperiodic rectangular box. In order to trigger an avalanche, the bed is instantaneously tilted to a finite slope angle above the maximum angle of stability. We simulate the dynamics of the transient flow for different solid fractions. In agreement with the experimental work of Iverson (Water Resour Res 36(7):1897\–1910, 2000) and Pailha et\ al. (Phys Fluids 20(11):111701, 2008), we find that the flow onset is controlled by the initial solid fraction.

}, isbn = {978-94-007-1420-5}, issn = {1866-8755}, doi = {10.1007/978-94-007-1421-210.1007/978-94-007-1421-2_14}, author = {Jean-Yves Delenne and Mansouri, M. and Farhang Radja{\"\i} and Moulay Sa{\"\i}d El Youssoufi and Seridi, A.}, editor = {St{\'e}phane Bonelli and Dascalu, Cristian and Fran{\c c}ois Nicot} } @proceedings {355, title = {Stress fields in granular solids: Effect of composition}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {568 - 573}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

We use the lattice element method to investigate stress fields at the sub-particle scale in granular solids composed of particles embedded in a cementing matrix. The stress distributions are found to be similar in 2D and 3D samples subjected to vertical loading with free lateral boundaries. We find that the number of strong forces falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. The influence of the matrix volume fraction and particle/matrix stiffness ratio with respect to stress distribution is analyzed in 2D and 3D. We show that both decreasing the matrix volume fraction and increasing the stiffness ratio lead to increasingly broader distributions within a limit beyond which the distribution is independent of one or both of these parameters.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.060}, author = {Vincent Topin and Farhang Radja{\"\i} and Jean-Yves Delenne} }