@article {659, title = {Bulk Photodriven CO2 Conversion through TiO2@Si(HIPE) Monolithic Macrocellular Foams}, journal = {Advanced Functional Materials}, volume = {3}, year = {2019}, month = {Jan-07-2019}, pages = {1807767}, abstract = {

Operating photo-induced reactions exclusively on catalyst surfaces while not exploiting the full catalyst volume generates a major footprint penalty for the photocatalytic reactor and leads to an inefficient use of the catalytic material. Photonic investigations clearly show that the solid foams have a strongly multidiffusive character, with photons being significantly trapped within the sample cores while addressing a photon mean free path lt = 20.1 \± 1.3 \µm. This 3D process both greatly limits back-reactions and promotes outstanding selectivity toward methane (around 80\%) generation, and even ethane (around 18\%) through C-C coupling reaction, with residual carbon monoxide and dihydrogen contents (around 2\%). Silica\–titania TiO2@Si(HIPE) self-standing macrocellular catalysts lead to optimal efficient thicknesses up to 20 times those of powders, thereby enhancing the way for real 3D-photodriven catalytic processes above the millimeter scale and up to a 6 mm thickness. A rather simple Langmuir\–Hinshelwood based kinetic model is proposed which highlights the strong dependence of photocatalytic reaction rates on light scattering and the crucial role on oxidation back-reactions. In addition, a strong correlation between light attenuation coefficient and photon mean free path and median pore aperture diameter is demonstrated, offering thus a tool for photocatalytic behavior prediction.

}, doi = {10.1002/adfm.201807767}, url = {http://doi.wiley.com/10.1002/adfm.201807767}, author = {Bernadet, Sophie and Tavernier, Eug{\'e}nie and Ta, Duc-Minh and Vall{\'e}e, Renaud A. L. and Ravaine, Serge and F{\'e}cant, Antoine and Backov, Renal} } @article {665, title = {Cutting floating single-walled carbon nanotubes with a {\textquoteleft}CO2 blade{\textquoteright}}, journal = {Carbon}, volume = {143}, year = {2019}, month = {Mar-2019}, pages = {481 - 486}, abstract = {

Uniform ultra-short (\< 100 nm) single-walled carbon nanotubes (SWCNTs) with properties of rich chemistry, high dispersity and easy manipulation, are of great importance for constructing novel nanostructures and highly integrated miniature devices. Herein, we report a recent breakthrough in cutting long SWCNTs into uniform ultra-short segments in gas-phase using CO2 as a \&$\#$39;blade.\&$\#$39; SWCNTs synthesized by an aerosol reactor are directly introduced into a second reactor for gaseous cutting. The quality and the number concentration of shortened SWCNTs are enhanced after the gas-phase cutting process. Moreover, the growth and cutting of SWCNTs are accomplished in a continuous gas-phase process, thus allows direct dry deposition of ultra-short SWCNTs as individual macromolecules or thin films onto various substrates for multiple applications. (C) 2018 Elsevier Ltd. All rights reserved.

}, issn = {00086223}, doi = {10.1016/j.carbon.2018.11.035}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0008622318310558}, author = {Tian, Ying and Wei, Nan and Laiho, Patrik and Ahmad, Saeed and Yann Magnin and Liao, Yongping and Christophe Bichara and Jiang, Hua and Kauppinen, Esko I.} } @article {627, title = {Multiscale modeling for bioresources and bioproducts}, journal = {Innovative Food Science \& Emerging Technologies}, volume = {46}, year = {2018}, month = {Avr-2018}, pages = {41 - 53}, abstract = {

Designing and processing complex matter and materials are key objectives of bioresource and bioproduct research. Modeling approaches targeting such systems have to account for their two main sources of complexity: their intrinsic multi-scale nature; and the variability and heterogeneity inherent to all living systems. Here we provide insight into methods developed at the Food \& Bioproduct Engineering division (CEPIA) of the French National Institute of Agricultural Research (INRA). This brief survey focuses on innovative research lines that tackle complexity by mobilizing different approaches with complementary objectives. On one hand cognitive approaches aim to uncover the basic mechanisms and laws underlying the emerging collective properties and macroscopic behavior of soft-matter and granular systems, using numerical and experimental methods borrowed from physics and mechanics. The corresponding case studies are dedicated to the structuring and phase behavior of biopolymers, powders and granular materials, and to the evolution of these structures caused by external constraints. On the other hand machine learning approaches can deal with process optimizations and outcome predictions by extracting useful information and correlations from huge datasets built from experiments at different length scales and in heterogeneous conditions. These predictive methods are illustrated in the context of cheese ripening, grape maturity prediction and bacterial production.

}, issn = {14668564}, doi = {10.1016/j.ifset.2017.09.015}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1466856417302230}, author = {Barnabe, M. and Blanc, Nicolas and Chabin, T. and Jean-Yves Delenne and Duri, A. and Frank, Xavier and Hugouvieux, V. and Lutton, E. and Mabille, F. and Saeid Nezamabadi and Perrot, N. and Farhang Radja{\"\i} and Ruiz, T. and Tonda, A.} } @article {624, title = {Accurate classical short-range forces for the study of collision cascades in Fe{\textendash}Ni{\textendash}Cr}, journal = {Computer Physics Communications}, volume = {219}, year = {2017}, month = {Oct-2017}, pages = {11 - 19}, abstract = {

The predictive power of a classical molecular dynamics simulation is largely determined by the physical validity of its underlying empirical potential. In the case of high-energy collision cascades, it was recently shown that correctly modeling interactions at short distances is necessary to accurately predict primary damage production. An ab initio based framework is introduced for modifying an existing embedded-atom method FeNiCr potential to handle these short-range interactions. Density functional theory is used to calculate the energetics of two atoms approaching each other, embedded in the alloy, and to calculate the equation of state of the alloy as it is compressed. The pairwise terms and the embedding terms of the potential are modified in accordance with the ab initio results. Using this reparametrized potential, collision cascades are performed in Ni50Fe50, Ni80Cr20 and Ni33Fe33Cr33. The simulations reveal that alloying Ni and NiCr to Fe reduces primary damage production, in agreement with some previous calculations. Alloying Ni and NiFe to Cr does not reduce primary damage production, in contradiction with previous calculations.

}, issn = {00104655}, doi = {10.1016/j.cpc.2017.05.001}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0010465517301315}, author = {B{\'e}land, Laurent Karim and Tamm, Artur and Mu, Sai and Samolyuk, D. and Osetsky, N. and Aabloo, Alvo and Klintenberg, Mattias and Caro, Alfredo and Stoller, E.} } @article {601, title = {Effect of particle size distribution on 3D packings of spherical particles}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 02030}, abstract = {

We use molecular dynamics simulations of frictionless spherical particles to investigate a class of polydisperse granular materials in which the particle size distribution is uniform in particle volumes. The particles are assembled in a box by uniaxial compaction under the action of a constant stress. Due to the absence of friction and the nature of size distribution, the generated packings have the highest packing fraction at a given size span, defined as the ratio of the largest size to the smallest size. We find that, up to = 5, the packing fraction is a nearly linear function of . While the coordination number is nearly constant due to the isostatic nature of the packings, we show that the connectivity of the particles evolves with . In particular, the proportion of particles with 4 contacts represents the largest proportion of particles mostly of small size. We argue that this particular class of particles occurs as a result of the high stability of local configurations in which a small particle is stuck by four larger particles.

}, doi = {10.1051/epjconf/201714002030}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714002030}, author = {Taiebat, Mahdi and Patrick Mutabaruka and Roland Jean-Marc Pellenq and Farhang Radja{\"\i}}, editor = {Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {588, title = {From cellulose to kerogen: molecular simulation of a geological process}, journal = {Chemical Science}, volume = {8}, year = {2017}, month = {Dec-01-2017}, pages = {8325-8335}, abstract = {

The process by which organic matter decomposes deep underground to form petroleum and its underlying kerogen matrix has so far remained a no man\&$\#$39;s land to theoreticians, largely because of the geological (Myears) timescale associated with the process. Using reactive molecular dynamics and an accelerated simulation framework, the replica exchange molecular dynamics method, we simulate the full transformation of cellulose into kerogen and its associated fluid phase under prevailing geological conditions. We observe in sequence the fragmentation of the cellulose crystal and production of water, the development of an unsaturated aliphatic macromolecular phase and its aromatization. The composition of the solid residue along the maturation pathway strictly follows what is observed for natural type III kerogen and for artificially matured samples under confined conditions. After expulsion of the fluid phase, the obtained microporous kerogen possesses the structure, texture, density, porosity and stiffness observed for mature type III kerogen and a microporous carbon obtained by saccharose pyrolysis at low temperature. As expected for this variety of precursor, the main resulting hydrocarbon is methane. The present work thus demonstrates that molecular simulations can now be used to assess, almost quantitatively, such complex chemical processes as petrogenesis in fossil reservoirs and, more generally, the possible conversion of any natural product into bio-sourced materials and/or fuel.

}, issn = {2041-6520}, doi = {10.1039/C7SC03466K}, url = {http://xlink.rsc.org/?DOI=C7SC03466K}, author = {Atmani, Lea and Christophe Bichara and Roland Jean-Marc Pellenq and Henri Van Damme and Adri CT Van Duin and Raza, Zamaan and Truflandier, Lionel A. and Ama{\"e}l Obliger and Kralert, Paul G. and Franz-Josef Ulm and Jean-Marc Leyssale} } @proceedings {336, title = {Modelling Transient Dynamics of Granular Slopes: MPM and DEM}, journal = {PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON THE MATERIAL POINT METHOD (MPM 2017) Book Series: Procedia Engineering }, volume = {175}, year = {2017}, month = {Jul-17-2017}, pages = {94 - 101}, publisher = {Elsevier Ltd.}, address = {JAN 10-13, 2017, Delft, NETHERLANDS}, abstract = {

Transient granular flows, such as rock falls, debris flows, and aerial and submarine avalanches, occur very often in nature. In the geotechnical context, transient movements of large granular slopes are a substantial factor of risk due to their destructive force and the transformations the y may produce in the landscape. This paper investigates the ability of MPM, a continuum approach, to reproduce the evolution of a granular slope destabilised by an external energy source. In particular, a central issue is whether the power-law dependence of run-out distance and time observed with respect to the initial geometry or energy can be reproduced by a simple Mohr-Coulomb plastic behaviour. The effect of base friction on the run-out kinematics is studied by comparing the data obtained from the DEM and MPM simulations. The mechanism of energy dissipation is primarily through friction and the MPM is able to predict the run-out response in good agreement with the DEM simulations. At very low excitation energies, the DEM simulations show longer run-out in comparison to the MPM due to local destabilization at the flow front. At low input energies, a larger fraction of the energy is consumed in the destabilisation process, hence the amount energy available for flow is less. However, at higher input energy, where most of the energy is dissipated during the spreading phase, the run-out distance has a weak dependence on the distribution of velocity in the granular mass.

}, issn = {18777058}, doi = {10.1016/j.proeng.2017.01.032}, author = {Krishna Kumar and Kenichi Soga and Jean-Yves Delenne and Farhang Radja{\"\i}}, editor = {Rohe, A and Kenichi Soga and Teunissen, H} } @proceedings {337, title = {MPM with Frictional Contact for Application to Soft Particulate Materials}, journal = {PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON THE MATERIAL POINT METHOD (MPM 2017) Book Series: Procedia Engineering }, volume = {175}, year = {2017}, month = {Mar-23-2017}, pages = {141 - 147}, publisher = {Elsevier Ltd.}, address = {JAN 10-13, 2017, Delft, NETHERLANDS}, abstract = {

Soft particle materials are composed of discrete particles that can undergo large deformations without rupture. Most food products, many powders, colloidal pastes, vesicles and biological cells are soft particle systems. In order to model such materials, we present an efficient numerical approach combining an implicit formulation of the Material Point Method (MPM) and Contact Dynamics (CD) method. The MPM deals with bulk variables of an individual particle by discretizing it as a collection of material points, whereas the CD allows for the treatment of frictional contacts between particles. This model is applied for the simulation of the uniaxial compression of 2D soft-particle packings. The compaction is a nonlinear process in which new contacts are formed between particles and the contact areas increase. The change of particle shapes allows these materials to reach high packing fraction. We find that the contact specific surface, the orientation anisotropy and the aspect ratio of particles increase as a function of the packing fraction but at different rates. We also evidence the effect of friction, which favors strong stress chains and thus the elongation of particles, leading to larger values of the orientation anisotropy and the aspect ratio at a given level of packing fraction as compared to a frictionless particle packing.

}, issn = {18777058}, doi = {10.1016/j.proeng.2017.01.044}, author = {Saeid Nezamabadi and Thanh Hai Nguyen and Jean-Yves Delenne and Julien Averseng and Frank, Xavier and Farhang Radja{\"\i}}, editor = {Rohe, A and Kenichi Soga and Teunissen, H} } @article {590, title = {Production of H 2 by water radiolysis in cement paste under electron irradiation: A joint experimental and theoretical study}, journal = {Cement and Concrete Research}, volume = {100}, year = {2017}, month = {Oct-2017}, pages = {110 - 118}, abstract = {

Long-term confinement of nuclear waste is one of the main challenges faced by the nuclear industry. Fission products such as Sr-90 and Cs-137, both beta(-) emitters known to induce serious health hazards, represent the largest fraction of nuclear waste. Cement is a good candidate to store them, provided it can resist the effects of irradiation over time. Here, we have investigated the effects of beta(-) decay on cement by performing electron irradiation experiments on different samples. We show that H-2 production in cement, the main effect of water radiolysis, depends strongly on composition and relative humidity. First-principles calculations indicate that the water-rich interlayer regions with Ca2+ ions act as electron traps that promote the formation of H-2. They also show that holes localize in water-rich regions in low Ca content samples and are then able to participate in H-2 production. This work provides new understanding of radiolysis effects in cements.

}, issn = {00088846}, doi = {10.1016/j.cemconres.2017.05.022}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0008884617302065}, author = {Le Caer, Sophie and Dezerald, Lucile and Boukari, Khaoula and Laine, Maxime and Taupin, s{\'e}bastien and Kavanagh, Ryan M. and Johnston, Conrad S.N. and Foy, Eddy and Charpentier, Thibault and Konrad J. Krakowiak and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Tribello, Gareth A. and Kohanoff, Jorge J. and Andres Sa{\`u}l} } @article {605, title = {Small solar system bodies as granular systems}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 14011}, abstract = {

Asteroids and other Small Solar System Bodies (SSSBs) are currently of great scientific and even industrial interest. Asteroids exist as the permanent record of the formation of the Solar System and therefore hold many clues to its understanding as a whole, as well as insights into the formation of planetary bodies. Additionally, SSSBs are being investigated in the context of impact risks for the Earth, space situational awareness and their possible industrial exploitation (asteroid mining). In all these aspects, the knowledge of the geophysical characteristics of SSSB surface and internal structure are of great importance. Given their size, constitution, and the evidence that many SSSBs are not simple monoliths, these bodies should be studied and modelled as self-gravitating granular systems in general, or as granular systems in micro-gravity environments in particular contexts. As such, the study of the geophysical characteristics of SSSBs is a multi-disciplinary effort that lies at the crossroads between Granular Mechanics, Celestial Mechanics, Soil Mechanics, Aerospace Engineering and Computer Sciences.

}, doi = {10.1051/epjconf/201714014011}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714014011}, author = {Hestroffer, Daniel and Adriano Campo Bagat{\'\i}n and Losert, Wolfgang and Opsomer, Eric and S{\'a}nchez, Paul and Scheeres, Daniel J. and Staron, Lydie and Taberlet, Nicolas and Yano, Hajime and Eggl, Siegfried and Lecomte, Charles-Edouard and Murdoch, Naomi and Farhang Radja{\"\i} and Richardson, Derek C. and Salazar, Marcos and Schwartz, Stephen R. and Tanga, Paolo}, editor = {Saeid Nezamabadi and Luding, S. and Jean-Yves Delenne} } @article {637, title = {Adsorption in heterogeneous porous media: Hierarchical and composite solids}, journal = {Microporous and Mesoporous Materials}, volume = {229}, year = {2016}, month = {Jul-15-2016}, pages = {145 - 154}, abstract = {

Experiment and molecular simulation are used to investigate adsorption in heterogeneous porous media consisting of hierarchical solids (combining different porosity scales) or composite solids (such as silver nanoparticles adsorbed at the external surface of zeolite). It is shown that adsorption in such heterogeneous materials can be written as a linear combination of the adsorption isotherms in its different domains (i.e. porosity scales for the hierarchical sample and constituents for the composite sample). In the case of the composite material, we also show that the linear combination can be used with weighing parameters obtained for a different adsorbate. Such a superimposition principle, which is validated using well-characterized experimental samples, is of interest for characterization purpose as well as industrial applications as they can be used to determine accurately the amount of phases in a given sample (volume corresponding to a given porosity scale or constituent). In contrast, significant departure between the experimental adsorption isotherm and the linear combination can be used to detect coupling effects between the different domains or restrained access to a given domain type. Such a characterization strategy of complex heterogeneous media is complementary to other experiments, such as those probing capillary hysteresis shapes, scanning curves and subloops, which allow determining the distribution of domains within the framework of the independent domain theory. (C) 2016 Elsevier Inc. All rights reserved.

}, issn = {13871811}, doi = {10.1016/j.micromeso.2016.04.011}, url = {https://linkinghub.elsevier.com/retrieve/pii/S1387181116301032}, author = {Deliere, Ludovic and Fran{\c c}ois Villemot and David Farrusseng and Anne Galarneau and Topin, Sylvain and Benoit A. Coasne} } @article {638, title = {Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles}, journal = {Chemistry - A European Journal}, volume = {22}, year = {2016}, month = {Jul-04-2016}, pages = {9660-9666}, abstract = {

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested.

}, doi = {10.1002/chem.201601351}, url = {http://doi.wiley.com/10.1002/chem.201601351}, author = {Deliere, Ludovic and Benoit A. Coasne and Topin, Sylvain and Gr{\'e}au, Claire and Moulin, Christophe and David Farrusseng} } @article {252, title = {Data analytics for simplifying thermal efficiency planning in cities}, journal = {Journal of The Royal Society Interface}, volume = {13}, year = {2016}, month = {Apr-2016}, pages = {Article Number: 20150971}, abstract = {

More than 44\% of building energy consumption in the USA is used for space heating and cooling, and this accounts for 20\% of national CO2emissions. This prompts the need to identify among the 130 million households in the USA those with the greatest energy-saving potential and the associated costs of the path to reach that goal. Whereas current solutions address this problem by analysing each building in detail, we herein reduce the dimensionality of the problem by simplifying the calculations of energy losses in buildings. We present a novel inference method that can be used via a ranking algorithm that allows us to estimate the potential energy saving for heating purposes. To that end, we only need consumption from records of gas bills integrated with a building\&$\#$39;s footprint. The method entails a statistical screening of the intricate interplay between weather, infrastructural and residents\&$\#$39; choice variables to determine building gas consumption and potential savings at a city scale. We derive a general statistical pattern of consumption in an urban settlement, reducing it to a set of the most influential buildings\&$\#$39; parameters that operate locally. By way of example, the implications are explored using records of a set of (N= 6200) buildings in Cambridge, MA, USA, which indicate that retrofitting only 16\% of buildings entails a 40\% reduction in gas consumption of the whole building stock. We find that the inferred heat loss rate of buildings exhibits a power-law data distribution akin to Zipf\&$\#$39;s law, which provides a means to map an optimum path for gas savings per retrofit at a city scale. These findings have implications for improving the thermal efficiency of cities\&$\#$39; building stock, as outlined by current policy efforts seeking to reduce home heating and cooling energy consumption and lower associated greenhouse gas emissions.

}, issn = {1742-5689}, doi = {10.1098/rsif.2015.0971}, author = {Mohammad Javad Abdolhosseini Qomi and Noshadravan, Arash and Sobstyl, Jake M. and Toole, Jameson and Ferreira, Joseph and Roland Jean-Marc Pellenq and Franz-Josef Ulm and Gonzalez, Marta C.} } @article {642, title = {How Ion Condensation Occurs at a Charged Surface: A Molecular Dynamics Investigation of the Stern Layer for Water{\textendash}Silica Interfaces}, journal = {The Journal of Physical Chemistry C}, volume = {120}, year = {2016}, month = {Jan-21-2016}, pages = {963-973}, abstract = {

We investigate the Stern layer of charged silicawater interfaces by calculating the ionsurface interaction from molecular dynamics simulations. The McMillanMayer potentials of mean force between a charged oxygen site and a lithium or cesium cation have been calculated. Contact ion pairs (CIPs) are important for the adsorption and desorption of ions, especially for lithium. An activation energy appears, which can result in a large estimated relaxation time. In the case of lithium, time scales needed to bind or unbind ions to and from the surface are found to be very long (up to the order of seconds for some surfaces), which implies that molecular dynamics cannot always be fully equilibrated. This work provides a new image of the Stern layer: it is not a continuous layer but a set of Bjerrum pairs. As a matter of fact, quantitative (macroscopic) treatments of such systems with localized surface charges require a three-dimensional model, contrary to the more commonly used one- or two-dimensional theoretical treatments.

}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b08836}, url = {http://pubs.acs.org/doi/10.1021/acs.jpcc.5b08836}, author = {Hocine, Sarah and Hartkamp, Remco and Bertrand Siboulet and Duvail, Magali and Benoit A. Coasne and Turq, P. and Jean-Francois Dufreche} } @article {179, title = {Advances in design and modeling of porous materials}, journal = {The European Physical Journal Special Topics}, volume = {224}, year = {2015}, month = {Jul-2015}, pages = {1653 - 1653}, abstract = {

This special issue of the European Physical Journal Special Topics is dedicated to selected papers from the symposium \“High surface area porous and granular materials\” organized in the frame of the conference \“Mat\ériaux 2014\”, held on November 24\–28, 2014 in Montpellier, France.

Porous materials and granular materials gather a wide variety of heterogeneous, isotropic or anisotropic media made of inorganic, organic or hybrid solid skeletons, with open or closed porosity, and pore sizes ranging from the centimeter scale to the sub-nanometer scale. Their technological and industrial applications cover numerous areas from building and civil engineering to microelectronics, including also metallurgy, chemistry, health, waste water and gas effluent treatment. Many emerging processes related to environmental protection and sustainable development also rely on this class of materials. Their functional properties are related to specific transfer mechanisms (matter, heat, radiation, electrical charge), to pore surface chemistry (exchange, adsorption, heterogeneous catalysis) and to retention inside confined volumes (storage, separation, exchange, controlled release). The development of innovative synthesis, shaping, characterization and modeling approaches enables the design of advanced materials with enhanced functional performance. The papers collected in this special issue offer a good overview of the state-of-the-art and science of these complex media.

We would like to thank all the speakers and participants for their contribution to the success of the symposium. We also express our gratitude to the organization committee of \“Mat\´eriaux 2014\”. We finally thank the reviewers and the staff of the European Physical Journal Special Topics who made the publication of this special issue possible.

}, issn = {1951-6355}, doi = {10.1140/epjst/e2015-02487-6}, author = {Ayral, Andre and Calas-Etienne, Sylvie and Benoit A. Coasne and Deratani, Andr{\'e} and Evstratov, Alexis and Anne Galarneau and Grande, Daniel and Hureau, Matthieu and Jobic, Herv{\'e} and Morlay, Catherine and Parmentier, Julien and Prelot, B{\'e}n{\'e}dicte and Rossignol, Sylvie and Simon-Masseron, Ang{\'e}lique and Thibault-Starzyk, Fr{\'e}d{\'e}ric} } @article {150, title = {Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time}, journal = {Cement and Concrete Research}, volume = {67}, year = {2015}, month = {Jan-2015}, pages = {103 - 121}, abstract = {

With ever more challenging (T,p) environments for cementing applications in oil and gas wells, there is a need to identify the fundamental mechanisms of fracture resistant oil well cements. We report results from a multi-technique investigation of behavior and properties of API class G cement and silica-enriched cement systems subjected to hydrothermal curing from 30\ \°C to 200\ \°C; including electron probe microanalysis, X-ray diffraction, thermogravimetry analysis, electron microscopy, neutron scattering (SANS), and fracture scratch testing. The results provide a new insight into the link between system chemistry, micro-texture and micro-fracture toughness. We suggest that the strong correlation found between chemically modulated specific surface and fracture resistance can explain the drop in fracture properties of neat oil-well cements at elevated temperatures; the fracture property enhancement in silica-rich cement systems, between 110\° and 175\ \°C; and the drop in fracture properties of such systems through prolonged curing over 1\ year at 200\ \°C.

Fig.1. Particle size distribution of the silica flour (ground quartz) incorporated{\textellipsis}

Fig.2. Location of the {\textquotedblleft}chemical poles{\textquotedblright} of the cement clinker and cement hydration{\textellipsis}

Fig.3. Simplified schematic of: (a) the cement paste microstructure cured at room{\textellipsis}

Fig.4. A schematic of the effect of adding an extra dimension, Al, to the statistical{\textellipsis}

Fig.5. X-ray powder diffraction spectra with qualitative analysis of the major phases{\textellipsis}

Fig.6. Thermal gravimetric analysis (TGA) carried out on samples cured in the{\textellipsis}

}, issn = {00088846}, doi = {10.1016/j.cemconres.2014.08.008}, author = {Konrad J. Krakowiak and Jeffrey J. Thomas and Musso, Simone and James, Simon and Ange-Therese Akono and Franz-Josef Ulm} } @article {147, title = {Roughness-Induced Vehicle Energy Dissipation: Statistical Analysis and Scaling}, journal = {Journal of Engineering Mechanics}, volume = {141}, year = {2015}, month = {Nov-2015}, pages = {Number: 04015046 }, abstract = {

The energy dissipated in a vehicle suspension system due to road roughness affects rolling resistance and the resulting fuel consumption and greenhouse gas emission. The key parameters driving this dissipation mechanism are identified via dimensional analysis. A mechanistic model is proposed that relates vehicle dynamic properties and road roughness statistics to vehicle dissipated energy and thus fuel consumption. A scaling relationship between the dissipated energy and the most commonly used road roughness index, the International Roughness Index (IRI), is also established. It is shown that the dissipated energy scales with IRI squared and scaling of dissipation with vehicle speed V depends on road waviness number w in the form of Vw\−2. The effect of marginal probability distribution of the road roughness profile on dissipated energy is examined. It is shown that although the marginal distribution of the road profile does not affect the identified scaling relationships, the multiplicative factor in these relationships does change from one distribution to another. As an example of practical application, the model is calibrated with the empirical HDM-4 model for different vehicle classes.

}, issn = {0733-9399}, doi = {10.1061/(ASCE)EM.1943-7889.0000944}, author = {Arghavan Louhghalam and Tootkaboni, Mazdak and Franz-Josef Ulm} } @book {647, title = {Springer Series in Materials ScienceMolecular Dynamics Simulations of Disordered MaterialsFirst-Principles Modeling of Binary Chalcogenides: Recent Accomplishments and New Achievements}, volume = {215}, year = {2015}, pages = {313 - 344}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Cham}, abstract = {

This contribution is focussed on a set of first-principles molecular dynamics results obtained over the past fifteen years for disordered chalcogenides. In the first part, we sketch and review the historical premises underlying research efforts devoted to the understanding of structural properties in liquid and glassy GexSe1-x systems. We stress the importance of selecting well performing exchange-correlation functionals (within density functional theory) to achieve a correct description of short and intermediate range order. In the second part, we provide a specific, comparative example of structural analysis for chalcogenide GeX4 systems differing by the chemical identity of the X atom. We are able to demonstrate that the correct account of differences between the coordination environments of the two corresponding glasses requires system sizes substantially larger than similar to 100 atoms.

}, isbn = {978-3-319-15674-3}, issn = {0933-033X}, doi = {10.1007/978-3-319-15675-010.1007/978-3-319-15675-0_12}, url = {http://link.springer.com/10.1007/978-3-319-15675-0}, author = {Bouzid, A. and Le Roux, S. and Guido Ori and Tugene, Christine and Boero, M. and Carlo Massobrio}, editor = {Carlo Massobrio and Du, Jincheng and Bernasconi, Marco and Salmon, Philip S.} } @article {73, title = {Physics and technological aspects of nanofluidics}, journal = {Lab on a Chip}, volume = {14}, year = {2014}, month = {Jun-2014}, pages = {3143 - 3158}, abstract = {

From a physical perspective, nanofluidics represents an extremely rich domain. It hosts many mechanisms acting on the nanoscale, which combine together or interact with the confinement to generate new phenomena. Superfast flows in carbon nanotubes, nonlinear electrokinetic transport, slippage over smooth surfaces, nanobubble stability, etc. are the most striking phenomena that have been unveiled over the past few years, and some of them are still awaiting an explanation. One may anticipate that new nanofluidic effects will be discovered in the future, but at the moment, the technological barrier is high. Fabrication of nanochannels is most often a tour de force, slow and costly. However, with the accumulation of technological skills along with the use of new nanofluidic materials (like nanotubes), nanofluidics is becoming increasingly accessible to experimentalists. Among the technological challenges faced by the field, fabricating devices mimicking natural nanometric systems, such as aquaporins, ionic pumps or kidney osmotic filtering, seems the most demanding in terms of groundbreaking ideas. Nanoflow characterization remains delicate, although considerable progress has been achieved over the past years. The targeted application of nanofluidics is not only in the field of genomics and membrane science \– with disruptive developments to be expected for water purification, desalination, and energy harvesting \– but also for oil and gas production from unconventional reservoirs. Today, in view of the markets that are targeted, nanofluidics may well impact the industry more than microfluidics; this would represent an unexpected paradox. These successes rely on using a variety of materials and technologies, using state-of-the-art nanofabrication, or low-tech inexpensive approaches. As a whole, nanofluidics is a fascinating field that is facing considerable challenges today. It possesses a formidable potential and offers much space for creative groundbreaking ideas.

Graphical abstract: Physics and technological aspects of nanofluidics
}, isbn = {1473-0197}, doi = {10.1039/C4LC00325J }, author = {Lyd{\'e}ric Bocquet and Tabeling, Patrick} } @article {91, title = {Role of Silver Nanoparticles in Enhanced Xenon Adsorption Using Silver-Loaded Zeolites}, journal = {Journal of Physical Chemistry C }, volume = {118}, year = {2014}, month = {Oct-06-2014}, pages = {25032-25040}, type = {Article}}, abstract = {
Abstract Image

Molecular simulation is used to unravel the adsorption mechanisms of xenon on Ag-doped ZSM-5 zeolite. We show that silver nanoparticles, which form at the external surface of zeolite crystallites, are responsible for enhanced xenon physisorption at very low pressure. We also propose a simple model of adsorption on such composite materials made up of silver-exchanged zeolites and silver nanoparticles adsorbed at the zeolite surface. This model, which allows predicting the adsorption of other gases without any additional parameters, provides a tool to characterize the amount of reduced silver as well as the silver particle size distribution (in good agreement with transmission electron microscopy images). The presence of a majority of silver nanoparticles is further characterized by means of X-ray diffraction and X-ray Absorption Spectroscopy at the silver K edge.

}, issn = {1932-7447}, doi = {10.1021/jp507590a}, author = {Deliere, Ludovic and Topin, Sylvain and Benoit A. Coasne and Fontaine, Jean-Pierre and De Vito, Sophie and Den Auwer, Christophe and Solari, Pier Lorenzo and Daniel, Cecile and Schuurman, Yves and David Farrusseng} } @article {82, title = {Surfactant Behavior of Ionic Liquids Involving a Drug: From Molecular Interactions to Self-Assembly}, journal = {Langmuir}, volume = {30}, year = {2014}, month = {Feb-2014}, pages = {1229-1238}, type = {Article}, abstract = {
Abstract Image

Aggregates formed in an aqueous medium by three ionic liquids CnMImIbu made up of 1-alkyl-3-methyl-imidazolium cation (n = 4, 6, 8) and ibuprofenate anion are investigated. Dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), 1H nuclear magnetic resonance measurements, and atom-scale molecular dynamics simulations are used to shed light on the main interactions governing the formation of the aggregates and their composition. At high concentration, mixed micelles are formed with a composition that depends on the imidazolium alkyl chain length. For the shortest alkyl chain, micelles are mainly composed of ibuprofenate anions with some imidazolium cations intercalated between the anions. Upon increasing the alkyl chain length, the composition of the aggregates gets enriched in imidazolium cations and aggregates of stoichiometric composition are obtained. Attractive interactions between these aggregates led to the formation of larger aggregates. As suggested by molecular simulations, these larger aggregates might constitute the early stage of phase separation. Transitions from micelles to vesicles or ribbons are observed due to dilution effects and changes in the chemical composition of the aggregates. We also show that aggregation can be probed using simple microscopic quantities such as radial distribution functions and average solvation numbers.

}, issn = {0743-7463}, doi = {10.1021/la404166y}, author = {Tourne-Peteilh, Corine and Benoit A. Coasne and In, Martin and Brevet, David and Devoisselle, Jean-Marie and Andre Vioux and Lydie Viau} } @article {24, title = {Adsorption of Volatile Organic Compounds in pure silica CHA, *BEA, MFI and STT-type zeolites}, journal = {Microp. Mesop. Mater.}, volume = {173}, year = {2013}, month = {Jun-2013}, pages = {147{\textendash}154}, abstract = {

Four pure silica zeolites, chabazite (CHA-structure type) and SSZ-23 (STT-structure type) with cage-like structure and silicalite-1 (MFI-structure type) and beta (\∗BEA-structure type) with channel structure, were synthesized and fully characterized. Their sorption properties were examined using gravimetric method combined with Grand Canonical Monte Carlo simulations (GCMC). Of particular interest is the large difference in the adsorption rates of n-hexane, p-xylene and acetone observed for these zeosils at 25, 75 and 150\ \°C. As expected, in most cases, a decrease in the adsorption capacity is observed with increasing the molar volume of the used probe molecule and the temperature. An exception is observed for the pure silica CHA-type zeolite due to its small pore size which prevents molecules from entering its porosity. However, at higher temperature, the window size widens slightly and allows n-hexane and acetone, which have kinetic diameter close to the pore opening, to enter easily in chabazite. As a result, for this zeosil, an increase in the adsorption capacity compared to that obtained at 25\ \°C is observed. All these zeosils are promising for technological uses in car exhaust gas decontamination.

Image for unlabelled figure

}, doi = {10.1016/j.micromeso.2013.02.009}, author = {A. F. Cosseron and T. J. Daou and L. Tzanis and H. Nouali and I. Deroche and Benoit A. Coasne and V. Tchaber and J. Patarin} } @proceedings {365, title = {AIP Conference Proceedings A multiscale description of failure in granular materials}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jun-18-2013}, pages = {585-588}, publisher = {AIP}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

This paper presents conditions of initiation and development of failure in granular materials through a twodimensional discrete element model. General condition for the effective development of failure and its physical characteristics are recalled. Then relation between failure and the second order work expressed in terms of microscopic variables is discussed. Eventually, correspondence between a localized mode of failure marked with shear band patterns and space distribution of negative values of microscopic second-order work is investigated.

}, doi = {10.1063/1.4811999}, author = {Hadda, Nejib and Fran{\c c}ois Nicot and Sibille, Luc and Farhang Radja{\"\i} and Tordesillas, Antoinette and Darve, F{\'e}lix}, editor = {Yu, A and Dong, K and Yang, R} } @proceedings {366, title = {AIP Conference ProceedingsTumbling sandpiles in a fluid}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jul-2013}, pages = {662-665}, publisher = {AIP}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

By means of contact dynamics simulations interfaced with computational fluid dynamics, we analyze the effect of a suspending fluid on the dynamics of collapse and spread of a granular column. We find that the runout distance increases as a power law with the aspect ratio of the column and, for a given aspect ratio, it may be the same in the grain-inertial and fluid-inertial regimes but with considerably longer duration in the latter case. We show that, in both viscous and fluid-inertial regimes, this behavior results from compensation between two effects of the fluid: 1) reduction of the kinetic energy during collapse and 2) enhancement of the flow by lubrication during spread.

}, doi = {10.1063/1.4812018}, author = {Farhang Radja{\"\i} and Vincent Topin and Perales, F. and Yann Monerie}, editor = {Yu, A and Dong, K and Yang, R} } @proceedings {368, title = {Comparison of the effects of rolling resistance and angularity in sheared granular media}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jul-2013}, pages = {891-894}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

In this paper, we compare the effect of rolling resistance at the contacts in granular systems composed of disks with the effect of angularity in granular systems composed of regular polygonal particles. For this purpose, we use contact dynamics simulations. By means of a simple shear numerical device, we investigate the mechanical behavior of these materials in the steady state in terms of shear strength, solid fraction, force and fabric anisotropies, and probability distribution of contact forces. We find that, based on the energy dissipation associated with relative rotation between two particles in contact, the effect of rolling resistance can explicitly be identified with that of the number of sides in a regular polygonal particle. This finding supports the use of rolling resistance as a shape parameter accounting for particle angularity and shows unambiguously that one of the main influencing factors behind the mechanical behavior of granular systems composed of noncircular particles is the partial hindrance of rotations as a result of angular particle shape.

}, keywords = {angularity, anisotropy, force distribution, Granular material, rolling resistance, Shear strength, solid fraction}, url = {https://hal.archives-ouvertes.fr/hal-00842799}, author = {Estrada, Nicolas and Emilien Az{\'e}ma and Farhang Radja{\"\i} and Taboada, Alfredo}, editor = {Yu, A and Dong, K and Yang, R} } @article {46, title = {ESEM Study of the Humidity-Induced Swelling of Clay Film}, journal = {Langmuir}, volume = {29}, year = {2013}, month = {Oct-02-2013}, pages = {12823{\textendash}12833}, abstract = {
Abstract Image

We measured the humidity-induced swelling of thin self-standing films of montmorillonite clay by a combination of environmental scanning electron microscopy (ESEM) and digital image correlation (DIC). The films were about 40 \μm thick. They were prepared by depositing and evaporating a suspension of clay and peeling off the highly oriented deposits. The rationale for creating such original samples was to obtain mesoscopic samples that could be used to bridge experimentally the gap between the scale of the clay layer and the engineering scale of a macroscopic clay sample. Several montmorillonite samples were used: the reference clay Swy-2, the same clay homoionized with sodium or calcium ions, and a sodium-exchanged Cloisite. The edges of the clay films were observed by ESEM at various relative humidity values between 14\% and 95\%. The ESEM images were then analyzed by DIC to measure the swelling or the shrinkage of the films. We also measured the adsorption/desorption isotherms by weighing the film samples in a humidity-controlled environment. In order to analyze our results, we compared our swelling/shrinkage and adsorption/desorption data with previously published data on the interlayer spacing obtained by X-ray diffraction and with numerical estimates of the interlayer water obtained by molecular dynamics simulation. The swelling and the hysteresis of this swelling were found to be comparable for the overall macroscopic films and for the interlayer space. The same correspondence between film and interlayer space was observed for the amount of adsorbed water. This suggests that, in the range of relative humidities values explored, the films behave like freely swelling oriented stacks of clay layers, without any significant contribution from the mesoporosity. The relevance of this result for the behavior of clayey sedimentary rocks and the differences with the behavior of nonoriented samples (powders or compacted powders) are briefly discussed.

}, doi = {10.1021/la402781p}, author = {Benoit Carrier and Wang, Linlin and Matthieu Vandamme and Roland Jean-Marc Pellenq and Bornert, Michel and Tanguy, Alexandre and Henri Van Damme} } @proceedings {370, title = {GRANULAR SLUMPING IN A FLUID : FOCUS ON RUNOUT DISTANCES}, journal = {3rd International Conference on Particle-based Methods}, volume = {PARTICLE-BASED METHODS III: FUNDAMENTALS AND APPLICATIONS}, year = {2013}, month = {Sept-2013}, pages = {115-123}, address = {SEP 18-20 2013 Stuttgart, GERMANY}, author = {Vincent Topin and Yann Monerie and Perales, F.}, editor = {Bischoff, M and Ramm, E and Onate, E} } @article {219, title = {Reactive elastomeric composites: When rubber meets cement}, journal = {Composites Science and Technology}, volume = {75}, year = {2013}, month = {Feb-11-2013}, pages = {77 - 83}, abstract = {

This paper describes a novel reactive composite material comprised of hydrogenated nitrile butadiene rubber (HNBR) compounded with slag cement. The composite initially looks and behaves like rubber, but when exposed to water it simultaneously swells and stiffens due to hydration of the cement component. The material eventually reaches a stiffness that is intermediate between that of HNBR and hydrated cement, while maintaining a relatively large ductility that is more characteristic of rubber. This behavior, which is ideal for sealing applications, differentiates this material from conventional swellable materials that become less stiff upon swelling. The development of this new type of material was motivated by the requirements of oilfield zonal isolation, where alternatives to cement are needed for some challenging sealing applications. A mechanism for the swelling and stiffening of the reactive composite is proposed: water diffuses into the HNBR matrix and is converted to bound water through hydration reactions with the cement, causing the effective solid filler content of the composite to increase. A model is proposed that treats the composite as a cellular solid with a continuous filler phase (hydrated cement). This model is able to reproduce the observed increase in the elastic modulus with time during exposure to water.

Elastic modulus ratio (current/initial) as a function of swelling, for HNBR ...

Kinetics of swelling of all three materials during approximately 1month of ...

Evolution of the elastic modulus of all three materials during approximately ...

Tensile stress{\textendash}strain curves for HNBR-cement (61{\textendash}39\% by volume, pre-exposure) ...

Schematic of the hydration process occurring inside the HNBR-cement material, ...

SEM images of HNBR-cement material before (left) and after (right) hydration. It ...

}, issn = {02663538}, doi = {10.1016/j.compscitech.2012.11.012}, author = {Robisson, Agathe and Sudeep Maheshwar and Musso, Simone and Jeffrey J. Thomas and Auzerais, Francois M. and Han, Dingzhi and Qu, Meng and Franz-Josef Ulm} } @conference {36, title = {Water Isotherms, Shrinkage and Creep of Cement Paste: Hypotheses, Models and Experiments}, booktitle = {Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Zdenek P. Ba{\.z}ant}, year = {2013}, month = {Sep-25-2013}, publisher = {ASCE Publications}, organization = {ASCE Publications}, abstract = {

Cement paste has a complex mesoscale structure, and small changes in its pore network potentially cause large variation in measurements such as the water isotherm (also nitrogen). We deconvolute the water isotherm with the help of advanced computational techniques, hypotheses, and a re-examination of published data. The pore system is divided into four different categories, each containing water with its own physical properties. By viewing the highly interdependent roles of water in each of the pore categories as a system, new insights are gained regarding possible mechanisms that control drying, shrinkage, and creep, and experimental strategies for verification.

}, doi = {10.1061/9780784413111.015}, author = {Hamlin M. Jennings and Enrico Masoero and Pinson, Matthew B and Strekalova, Elena G and Patrick A Bonnaud and Hegoi Manzano and Qing Ji and Jeffrey J. Thomas and Roland Jean-Marc Pellenq and Franz-Josef Ulm and others} } @article {216, title = {Water self-diffusion at the surface of silica glasses: effect of hydrophilic to hydrophobic transition}, journal = {Molecular Physics}, volume = {111}, year = {2013}, month = {Nov-2013}, pages = {3410 - 3417}, abstract = {

We study water dynamics at a silica aqueous interface. Both hydrophilic (hydroxylated) surfaces and hydrophobic surfaces (dehydroxylated upon irradiation) have been generated from atomistic simulations. A new method for the calculation of the normal self-diffusion coefficients based on the calculation of mean first passage times is proposed. It uses the Smoluchowski theory of Brownian motion and it takes proper account of the layering of the molecules. In the case of parallel self-diffusion coefficients, a decrease is found compared to the bulk values. It can be described in terms of hydrodynamic boundary conditions induced by the surface confinement. This hydrodynamic explanation is not enough to interpret the case of normal self-diffusion coefficients for which an important diminution is found. Normal self-diffusion coefficients appear to depend strongly on the hydrophilicity of the surface. They tend towards their bulk value only at long distances from the surfaces. The first layer of water molecules is found to be partially adsorbed.

}, issn = {0026-8976}, doi = {10.1080/00268976.2013.861084}, author = {Bertrand Siboulet and Molina, J. and Benoit A. Coasne and Turq, P. and Jean-Francois Dufreche} } @article {294, title = {Collapse Dynamics and Runout of Dense Granular Materials in a Fluid}, journal = {Physical Review Letters}, volume = {109}, year = {2012}, month = {Nov-02-2012}, pages = {Article Number: 188001}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.109.188001}, author = {Vincent Topin and Yann Monerie and Perales, F. and Farhang Radja{\"\i}} } @article {260, title = {Quantifying plasticity-independent creep compliance and relaxation of viscoelastoplastic materials under contact loading}, journal = {Journal of Materials Research}, volume = {27}, year = {2012}, month = {Jan-2012}, pages = {302 - 312}, abstract = {

Here we quantify the time-dependent mechanical properties of a linear viscoelastoplastic material under contact loading. For contact load relaxation, we showed that the relaxation modulus can be measured independently of concurrent plasticity exhibited during the loading phase. For indentation creep, we showed that the rate of change of the contact creep compliance can be measured independently of any plastic deformation exhibited during loading through , where a(t) is the contact radius, h(t) is the displacement of the contact probe, and Pmax is the constant applied load during the creep phase. These analytical relations were compared with numerical simulations of conical indentation creep for a viscoelastoplastic material and validated against sharp indentation creep experiments conducted on polystyrene. The derived relations enable extraction of viscoelastic material characteristics, even if sharp probes confer concurrent plasticity, applicable for a general axisymmetric contact probe geometry and a general time-independent plasticity.

}, issn = {0884-2914}, doi = {10.1557/jmr.2011.302}, author = {Matthieu Vandamme and Tweedie, Catherine A. and Constantinides, Georgios and Franz-Josef Ulm and Krystyn J. Van Vliet} } @article {58, title = {Structure and properties of nanoscale materials: theory and atomistic computer simulation}, journal = {International Journal of Nanotechnology}, volume = {9}, year = {2012}, month = {2012}, pages = {576{\textendash}604}, abstract = {

We present a review of a few research topics developed within the \"Theory and Atomistic Computer Simulation\" Department at CINaM. The bottom line of the scientific activity is to use up\–to\–date theoretical and computer simulation techniques to address physics and materials science problems, often at the nanometric scale, in close contact with experimental groups. It ranges from the study of the structure and properties of molecular systems for organic electronics to metallic clusters and alloys, magnetic oxides, nuclear fuels and carbon\–based nanostructures. These studies are motivated by fundamental research questions as well as more applied goals including environmental and energy issues, or information technologies. This broad spectrum of activities requires a large range of techniques, from theory and ab initio calculations to semi\–empirical models incorporated in Monte Carlo or molecular dynamics simulations.

}, doi = {10.1504/IJNT.2012.045335 }, author = {Christophe Bichara and Marsal, P and Mottet, C and Roland Jean-Marc Pellenq and F. Ribeiro and Andres Sa{\`u}l and G. Tr{\'e}glia and Weissker, H{\textendash}Ch} } @article {295, title = {Tensile strength and fracture of cemented granular aggregates}, journal = {The European Physical Journal E}, volume = {35}, year = {2012}, month = {Nov-2012}, pages = { Article Number: 117}, abstract = {

Cemented granular aggregates include a broad class of geomaterials such as sedimentary rocks and some biomaterials such as the wheat endosperm. We present a 3D lattice element method for the simulation of such materials, modeled as a jammed assembly of particles bound together by a matrix partially filling the interstitial space. From extensive simulation data, we analyze the mechanical properties of aggregates subjected to tensile loading as a function of matrix volume fraction and particle-matrix adhesion. We observe a linear elastic behavior followed by a brutal failure along a fracture surface. The effective stiffness before failure increases almost linearly with the matrix volume fraction. We show that the tensile strength of the aggregates increases with both the increasing tensile strength at the particle-matrix interface and decreasing stress concentration as a function of matrix volume fraction. The proportion of broken bonds in the particle phase reveals a range of values of the particle-matrix adhesion and matrix volume fraction for which the cracks bypass the particles and hence no particle damage occurs. This limit is shown to depend on the relative toughness of the particle-matrix interface with respect to the particles.

}, issn = {1292-8941}, doi = {10.1140/epje/i2012-12117-7}, author = {Rafik Aff{\`e}s and Jean-Yves Delenne and Yann Monerie and Farhang Radja{\"\i} and Vincent Topin} } @article {289, title = {An atomistic modelling of the porosity impact on UO2 matrix macroscopic properties}, journal = {Journal of Nuclear Materials}, volume = {415}, year = {2011}, month = {Aug-15-2011}, pages = {210 - 216}, abstract = {

The porosity impact on the UO2 matrix thermomechanical properties was investigated using atomistic simulation techniques. The porosity modifies the thermal expansion coefficient and this is attributed to pore surface effects. The elastic moduli at 0\ K and at finite temperature decrease with porosity, this variation being well approximated using affine functions. These results agree with other mesoscale model predictions and experimental data, showing the ability of the semiempirical potential atomistic simulations to give an overall good description of the porous UO2. However, the surface effects are incompletely described.

Fig. 1. The UO2 elementary cell contains 12 atoms: 4 uranium atoms (large spheres){\textellipsis}

fig.=

Fig. 3. Example of 6{\texttimes}6{\texttimes}6 one pore relaxed supercells of different pore radius (4, 6 and{\textellipsis}

Fig. 4. One layer of UO2 as considered in the present work: top {\textendash} the (100){\textellipsis}

Fig. 5. Variation of the UO2 thermal expansion coefficient versus temperature: top {\textendash}{\textellipsis}

Fig. 6. Variation of the shear modulus (G) and Young{\textquoteright}s modulus (E) versus porosity at 0K

}, issn = {00223115}, doi = {10.1016/j.jnucmat.2011.06.006}, author = {Andrei Jelea and Colbert, M. and F. Ribeiro and G. Tr{\'e}glia and Roland Jean-Marc Pellenq} } @proceedings {356, title = {Compressive strength of an unsaturated granular material during cementation}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {308 - 311}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

The cohesive behaviour of unsaturated granular materials is due to the presence of cohesive bonds between grains. These bonds can have various physico-chemical characteristics and may evolve with environmental conditions. We study the case of a granular material partially saturated by an aqueous solution. The bonds are thus initially of capillary type and the mechanical strength is weak. At low relative humidity, the phase change of water involves crystallization of the solute at the contact points between grains, generating thus solid bonds. The mechanical strength of the material is then enhanced. An experimental study of the evolution of the mechanical strength during crystallization of the solute shows clearly the transition from capillary regime to cemented regime. This transition is not correlated with the mass of the crystallized solute, but rather with the residual degree of saturation. This behavior is analyzed here in the light of discrete element simulations. We introduce a local cohesion law that accounts for transition from capillary to cemented bonding. This law is formulated in terms of the degree of crystallization as a result of the evaporation of water at the boundary of the sample. The cohesion of the packing is initially of capillary type. A crystallization front then spreads from the sample boundaries to the center of the sample, and the strength increases as a result. Uniaxial compression allows us to determine the strength at different times. The numerical strength agrees well with the experimental data, and reveals strength enhancement as the solute crystallizes, as well as the transition from capillary to cementation regime.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.021}, author = {Jean-Yves Delenne and Souli{\'e}, Fabien and Moulay Sa{\"\i}d El Youssoufi and Farhang Radja{\"\i}} } @article {317, title = {Identification of rolling resistance as a shape parameter in sheared granular media}, journal = {Physical Review E}, volume = {84}, year = {2011}, month = {Jul-28-2011}, pages = {Article Number: 011306 Part: 1}, abstract = {

Using contact dynamics simulations, we compare the effect of rolling resistance at the contacts in granular systems composed of disks with the effect of angularity in granular systems composed of regular polygonal particles. In simple shear conditions, we consider four aspects of the mechanical behavior of these systems in the steady state: shear strength, solid fraction, force and fabric anisotropies, and probability distribution of contact forces. Our main finding is that, based on the energy dissipation associated with relative rotation between two particles in contact, the effect of rolling resistance can explicitly be identified with that of the number of sides in a regular polygonal particle. This finding supports the use of rolling resistance as a shape parameter accounting for particle angularity and shows unambiguously that one of the main influencing factors behind the mechanical behavior of granular systems composed of noncircular particles is the partial hindrance of rotations as a result of angular particle shape.

}, issn = {1539-3755}, doi = {10.1103/PhysRevE.84.011306}, author = {Estrada, Nicolas and Emilien Az{\'e}ma and Farhang Radja{\"\i} and Taboada, Alfredo} } @proceedings {352, title = {Modeling Porous Granular Aggregates}, journal = {9th International Workshop on Buifurcation and Degradation in Geomaterials (IWBDG 2011)}, volume = {Springer Series in Geomechanics and Geoengineering - ADVANCES IN BIFURCATION AND DEGRADATION IN GEOMATERIALS}, year = {2011}, month = {May-28-2011}, pages = {249 - 254}, publisher = {Springer Netherlands}, address = {MAY 23-26 2011 Porquerolles, FRANCE}, abstract = {

We rely on 3D simulations based on the Lattice Element Method (LEM) to analyze the failure of porous granular aggregates under tensile loading. We investigate crack growth by considering the number of broken bonds in the particle phase as a function of the matrix volume fraction and particle-matrix adhesion. Three regimes are evidenced, corresponding to no particle damage, particle abrasion and particle fragmentation, respectively. We also show that the probability density of strong stresses falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. Decreasing the matrix volume fraction leads to increasingly broader stress distribution and hence a higher stress concentration. Our findings are in agreement with 2D results previously reported in the literature.

}, isbn = {978-94-007-1420-5}, issn = {1866-8755}, doi = {10.1007/978-94-007-1421-2_32}, author = {Rafik Aff{\`e}s and Vincent Topin and Jean-Yves Delenne and Yann Monerie}, editor = {St{\'e}phane Bonelli and Dascalu, Cristian and Fran{\c c}ois Nicot} } @proceedings {355, title = {Stress fields in granular solids: Effect of composition}, journal = {Symposium on Science and Technology of Powders and Sintered Materials (STPMF 2009)}, volume = {POWDER TECHNOLOGY}, year = {2011}, month = {Mar-25-2011}, pages = {568 - 573}, address = {MAY 25-27 2009 Montpellier, FRANCE}, abstract = {

We use the lattice element method to investigate stress fields at the sub-particle scale in granular solids composed of particles embedded in a cementing matrix. The stress distributions are found to be similar in 2D and 3D samples subjected to vertical loading with free lateral boundaries. We find that the number of strong forces falls off exponentially at high particle volume fractions where a percolating network of jammed particles occurs. The influence of the matrix volume fraction and particle/matrix stiffness ratio with respect to stress distribution is analyzed in 2D and 3D. We show that both decreasing the matrix volume fraction and increasing the stiffness ratio lead to increasingly broader distributions within a limit beyond which the distribution is independent of one or both of these parameters.

}, issn = {00325910}, doi = {10.1016/j.powtec.2010.08.060}, author = {Vincent Topin and Farhang Radja{\"\i} and Jean-Yves Delenne} }