@proceedings {351, title = {Numerical simulation of granular media composed with irregular polyhedral particles: effect of particles{\textquoteright} angularity}, journal = {2nd International Conference on Particle-Based Methods - Fundamentals and Applications (Particles)}, volume = {PARTICLE-BASED METHODS II: FUNDAMENTALS AND APPLICATIONS}, year = {2015}, month = {Feb-02-2015}, pages = {222-228}, address = {OCT 26-28 2011 Barcelona, SPAIN}, abstract = {

We use contact dynamic simulations to perform a systematic investigation of the effects of particles shape angularity on mechanicals response in sheared granular ma-terials. The particles are irregular polyhedra with varying numbers of face from spheres to \"double pyramid\" shape with a constant aspect ratio. We study the quasi-static behav-ior, structural and force anisotropies of several packings subjected to triaxial compression. An interesting finding is that the shear strength first increases with angularity up to a maximum value and then saturates as the particles become more angular. Analyzing the anisotropies induced by the angular distributions of contacts and forces orientations, we show that the saturation of the shear strength at higher angularities is a consequence of fall-off of the texture anisotropies compensated by an increase of the tangential force anisotropy. This is attributed to the fact that at higher angularity, particles are bet-ter connected (or surrounded) leading to an increase of friction mobilization in order to achieve the deformation. Moreover, the most angular particles also have very few sides so that, this effect is enhanced by the increase of the proportion of face-side and side-side contacts with angularity.

}, keywords = {angularity, force transmission, Granular Materials, particle shape, texture}, url = {https://hal.archives-ouvertes.fr/hal-01112373}, author = {Emilien Az{\'e}ma and Farhang Radja{\"\i} and Dubois, Fr{\'e}d{\'e}ric}, editor = {Onate, E and Owen, DRJ} } @proceedings {370, title = {GRANULAR SLUMPING IN A FLUID : FOCUS ON RUNOUT DISTANCES}, journal = {3rd International Conference on Particle-based Methods}, volume = {PARTICLE-BASED METHODS III: FUNDAMENTALS AND APPLICATIONS}, year = {2013}, month = {Sept-2013}, pages = {115-123}, address = {SEP 18-20 2013 Stuttgart, GERMANY}, author = {Vincent Topin and Yann Monerie and Perales, F.}, editor = {Bischoff, M and Ramm, E and Onate, E} } @proceedings {350, title = {Effect of Particle Shape non-Convexity on the Rheology of Granular Media : 3D Contact Dynamics Simulations}, journal = {2nd International Conference on Particle-Based Methods - Fundamentals and Applications (Particles)}, volume = {PARTICLE-BASED METHODS II: FUNDAMENTALS AND APPLICATIONS}, year = {2012}, month = {Apr-10-2012}, pages = {427-434}, address = {OCT 26-28 2011 Barcelona, SPAIN}, abstract = {

We analyze the effect of particle shape non-convexity on the quasi-static behavior of granular materials by means of contact dynamics simulations. The particles are regular aggregates of four overlapping spheres described by a nonconvexity parameter depending on the relative positions of the particles. Several packings are first submitted to isotropic compression without friction. We find that, as in 2D, the solid fraction of isotropic packings increases with non-convexity up to a maximum value and then declines to be nearly equal to that of a packing composed of only spheres. It is also remarkable that the coordination number increases quickly and saturates so that the packings composed of grains with a high level of nonconvexity are looser but more strongly connected. Then, the quasi-static behavior, structural and force anisotropies are analyzed by subjecting each packing to a triaxial compression. We find that the shear strength increases with non-convexity. We show that this increase results from the presence of multiple contacts between trimers leading to enhanced frictional interlocking.

}, keywords = {force transmission, Granular Materials, non-convexity, particle shape, texture}, url = {https://hal.archives-ouvertes.fr/hal-00686453}, author = {Baptiste Saint-Cyr and Emilien Az{\'e}ma and Jean-Yves Delenne and Farhang Radja{\"\i} and Philippe Sornay}, editor = {Onate, E and Owen, DRJ} } @proceedings {349, title = {Creep behaviour of confined layers of polyhedral grains}, journal = {2nd International Conference on Particle-Based Methods - Fundamentals and Applications (Particles)}, volume = {PARTICLE-BASED METHODS II: FUNDAMENTALS AND APPLICATIONS }, year = {2011}, month = {Oct-2011}, pages = {574-583}, address = {OCT 26-28 2011 Barcelona, SPAIN}, abstract = {

By means of contact dynamics simulations, we investigate the creep deformation of a thin granular layer composed of irregular polyhedral particles under the action of a constant vertical overload applied on a horizontal wall on top of the layer. We show that the total deformation induced by the overload increases with the ratio between the vertical and confining horizontal stresses and the aspect ratio of the sample. The effect of the aspect ratio is a consequence of the mobilized wall-grain friction forces at the top and bottom boundaries, that lead to enhanced strength by stabilizing strong force chains at the center of the sample. We also evidence the influence of loading history due to strain-induced fabric change or inertial effects resulting from the instant application of the overload. The topology of the contact network evolves in close correlation with creep. In particular, the face/face contacts between polyhedral particles concentrate largest force chains and their number is an increasing function of creep. A crucial feature of a confined granular system is the statistical variability of the mechanical response that we analyzed for creep deformations by performing a large number of simulations for independent initial configurations. Our data indicate that the distribution of fluctuations with respect to the mean creep falls off exponentially.

}, url = {https://hal.archives-ouvertes.fr/hal-00761094}, author = {Quezada, Juan Carlos and Farhang Radja{\"\i} and Breul, Pierre and Saussine, Gilles}, editor = {Onate, E and Owen, DRJ} }