@article {657, title = {Bilirubin oxidase-based silica macrocellular robust catalyst for on line dyes degradation}, journal = {Enzyme and Microbial Technology}, volume = {120}, year = {2019}, month = {Jan-01-2019}, pages = {77 - 83}, abstract = {

We present a new heterogeneous biocatalyst based on the grafting of Bilirubin Oxidase from Bacillus pumilus into macrocellular Si(HIPE) materials dedicated to water treatment. Due to the host intrinsic high porosity and monolithic character, on-line catalytic process is reached. We thus used this biocatalyst toward uni-axial flux decolorization of Congo Red and Remazol Brilliant Blue (RBBR) at two different pH (4 and 8.2), both in presence or absence of redox mediator. In absence of redox mediators, 40\% decolorization efficiency was reached within 24 h at pH 4 for Congo Red and 80\% for RBBR at pH 8.2 in 24 h. In presence of 10 mu M ABTS, it respectively attained 100\% efficiency after 2h and 12h. We have also demonstrated that non-toxic species were generated upon dyes decolorization. These results show that unlike laccases, this new biocatalyst exhibits excellent decolorization properties over a wide range of pH. Beyond, this enzymatic-based heterogeneous catalyst can be reused during two months being simply stored at room temperature while maintaining its decolorization efficiency. This study shows that this biocatalyst is a promising and robust candidate toward wastewater treatments, both in acidic and alkaline conditions where in the latter efficient decolorization strategies were still missing.

}, issn = {01410229}, doi = {10.1016/j.enzmictec.2018.10.004}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0141022918303466}, author = {Roucher, Armand and Roussarie, Elodie and Gauvin, R{\'e}gis M. and Rouhana, Jad and Gounel, S{\'e}bastien and Stines-Chaumeil, Claire and Mano, Nicolas and Backov, Renal} } @article {673, title = {Bitumen@SiO2 core-shell particles green synthesis towards flowable powdered bitumen and their binder applications}, journal = {Colloids and Surfaces A: Physicochemical and Engineering Aspects}, volume = {570}, year = {2019}, month = {Mars-20-2019}, pages = {531 - 543}, abstract = {

Mineralization of occulated bitumen emulsions allows producing bitumen powders, also referred to as Bitumen@SiO2 hybrid particles, that can resist storage in hard conditions, with a load up to 8 kPa at 50 \°C during 20 h, without alteration of their morphology or release of their bitumen core. Thanks to the occulation, nal Bitumen@SiO2 powders are not highly pulverulent and allow transportation and handling of bitumen at ambient temperature without the need of water as it is the case for bitumen emulsions. This \“water free\” storage par- ticularity exhibits the double advantage of reducing the cost of transport and of avoiding inhibition of bitumen adhesion at mineral aggregates through the presence of water, therefore rendering the bitumen its high quality of binder. The silica shell is responsible for the high storage stability and, when mixed with aggregates for end use of asphalt, as for example in pavement applications, serves as mineral charge to the bitumen, modifying the bitumen ow properties. Indeed, when heated at 100 \°C and crushed, the capsules break releasing thus the bitumen. This suspension made of bitumen and silica shell fragments exhibits an interesting shear-thinning behavior that can be attributed to the presence of the remnant fragments. Indeed, when shell fragments have been transferred into a silicon oil, initially exhibiting a Newtonian behavior, the mixture of fragments and oil also exhibited a shear thinning rheogram demonstrating the e ect of the silica shell fragments. The bene t of such a behavior modi cation is the possibility to reduce or avoid the usual addition of llers. Passive adhesion has been tested by generating asphalt concretes with Bitumen@SiO2 powders and showed high stability.

}, issn = {09277757}, doi = {10.1016/j.colsurfa.2019.03.048}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0927775719302420}, author = {Anaclet, Pauline and Depardieu, Martin and Laurichesse, Eric and Julien, Viviane and Hung, Yvong and Schmitt, Veronique and Backov, Renal} } @article {659, title = {Bulk Photodriven CO2 Conversion through TiO2@Si(HIPE) Monolithic Macrocellular Foams}, journal = {Advanced Functional Materials}, volume = {3}, year = {2019}, month = {Jan-07-2019}, pages = {1807767}, abstract = {

Operating photo-induced reactions exclusively on catalyst surfaces while not exploiting the full catalyst volume generates a major footprint penalty for the photocatalytic reactor and leads to an inefficient use of the catalytic material. Photonic investigations clearly show that the solid foams have a strongly multidiffusive character, with photons being significantly trapped within the sample cores while addressing a photon mean free path lt = 20.1 \± 1.3 \µm. This 3D process both greatly limits back-reactions and promotes outstanding selectivity toward methane (around 80\%) generation, and even ethane (around 18\%) through C-C coupling reaction, with residual carbon monoxide and dihydrogen contents (around 2\%). Silica\–titania TiO2@Si(HIPE) self-standing macrocellular catalysts lead to optimal efficient thicknesses up to 20 times those of powders, thereby enhancing the way for real 3D-photodriven catalytic processes above the millimeter scale and up to a 6 mm thickness. A rather simple Langmuir\–Hinshelwood based kinetic model is proposed which highlights the strong dependence of photocatalytic reaction rates on light scattering and the crucial role on oxidation back-reactions. In addition, a strong correlation between light attenuation coefficient and photon mean free path and median pore aperture diameter is demonstrated, offering thus a tool for photocatalytic behavior prediction.

}, doi = {10.1002/adfm.201807767}, url = {http://doi.wiley.com/10.1002/adfm.201807767}, author = {Bernadet, Sophie and Tavernier, Eug{\'e}nie and Ta, Duc-Minh and Vall{\'e}e, Renaud A. L. and Ravaine, Serge and F{\'e}cant, Antoine and Backov, Renal} } @article {268, title = {Binary mixtures of disks and elongated particles: Texture and mechanical properties}, journal = {Physical Review E}, volume = {94}, year = {2016}, month = {Oct-14-2016}, pages = {Article Number: 042901}, abstract = {

We analyze the shear strength and microstructure of binary granular mixtures consisting of disks and elongated particles by varying systematically both the mixture ratio and degree of homogeneity (from homogeneous to fully segregated). The contact dynamics method is used for numerical simulations with rigid particles interacting by frictional contacts. A counterintuitive finding of this work is that the shear strength, packing fraction, and, at the microscopic scale, the fabric, force, and friction anisotropies of the contact network are all nearly independent of the degree of homogeneity. In other words, homogeneous mixtures have the same strength properties as segregated packings of the two particle shapes. In contrast, the shear strength increases with the proportion of elongated particles correlatively with the increase of the corresponding force and fabric anisotropies. By a detailed analysis of the contact network topology, we show that various contact types contribute differently to force transmission and friction mobilization.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, issn = {2470-0045}, doi = {10.1103/PhysRevE.94.042901}, author = {Emilien Az{\'e}ma and Preechawuttipong, Itthichai and Farhang Radja{\"\i}} } @article {267, title = {Bottom-up model for understanding the effects of wheat endosperm microstructure on its mechanical strength}, journal = {Journal of Food Engineering}, volume = {190}, year = {2016}, month = {Dec-2016}, pages = {40 - 47}, abstract = {

Wheat flours are essential ingredients of daily food products like bread, cookies or pastries. Their quality depends on the milling process and mechanical strength of wheat grains. Although it is well known that the strength and rupture of grains are strongly controlled by the endosperm microstructure, the respective roles of the starch and polymer volume fractions and their adhesion are not yet fully understood. This typical biological microstructure can be modeled as a cemented granular material, where the two size populations of starch granules (large:A-type, small:B-type) are the particles, and the protein matrix, which partially fills the space between granules, plays the role of a cement. This structural model of wheat endosperm is used, together with mechanical characteristics of starch and proteins obtained by means of Atomic Force Microscopy (AFM) measurements, to simulate the mechanical behavior and breakage of wheat endosperm in milling process. We find that the porosity outweighs the effect of other parameters for the elastic modulus, which declines as a nearly linear function of porosity. We also show that the tensile strength is an increasing function of the amount and connectivity of starch granules with increasing concentration of stresses along chains of granules. This effect is more significant at low porosity where stress distribution is mainly controlled by the contact network between starch granules. This effect explains why the protein content is not fully correlated to vitreousness, and samples of similar protein content can be different in vitreosity. Finally, we find that the starch-granule adhesion strongly affects the tensile strength whereas the effect of starch volume fraction appears mainly at high interface adhesion, which is the case of hard type wheat grains.

Fig.1. (a) Scanning Electron Micrograph of the fracture surface of a soft wheat{\textellipsis}

Fig.2. Illustration of the lattice approach for one step: (1) Initial lattice state{\textellipsis}

Fig.3. (a) Bidisperse granular sample generated with DEM for the highest starch volume{\textellipsis}

Fig.4. Example of samples submitted to tensile tests: (a) Maps of vertical stress{\textellipsis}

Fig.5. Stress-strain plots showing the effect of different values of the starch{\textellipsis}

Fig.6. Effective Young{\textquoteright}s modulus as a function of (a) protein volume fraction ρp and{\textellipsis}

}, issn = {02608774}, doi = {10.1016/j.jfoodeng.2016.06.009}, author = {Chichti, Emna and Val{\'e}rie Lullien-Pellerina and George, Matthieu and Farhang Radja{\"\i} and Rafik Aff{\`e}s and Jean-Yves Delenne} } @article {638, title = {Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles}, journal = {Chemistry - A European Journal}, volume = {22}, year = {2016}, month = {Jul-04-2016}, pages = {9660-9666}, abstract = {

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested.

}, doi = {10.1002/chem.201601351}, url = {http://doi.wiley.com/10.1002/chem.201601351}, author = {Deliere, Ludovic and Benoit A. Coasne and Topin, Sylvain and Gr{\'e}au, Claire and Moulin, Christophe and David Farrusseng} } @article {153, title = {Bonded-cell model for particle fracture}, journal = {Physical Review E}, volume = {91}, year = {2015}, month = {Feb-09-2015}, pages = {Article Number: 022203}, abstract = {

Particle degradation and fracture play an important role in natural granular flows and in many applications of granular materials. We analyze the fracture properties of two-dimensional disklike particles modeled as aggregates of rigid cells bonded along their sides by a cohesive Mohr-Coulomb law and simulated by the contact dynamics method. We show that the compressive strength scales with tensile strength between cells but depends also on the friction coefficient and a parameter describing cell shape distribution. The statistical scatter of compressive strength is well described by the Weibull distribution function with a shape parameter varying from 6 to 10 depending on cell shape distribution. We show that this distribution may be understood in terms of percolating critical intercellular contacts. We propose a random-walk model of critical contacts that leads to particle size dependence of the compressive strength in good agreement with our simulation data.

Figure

Figure

Figure

Figure

Figure

Figure

Figure

}, issn = {1539-3755}, doi = {10.1103/PhysRevE.91.022203}, author = {Duc-Hanh Nguyen and Emilien Az{\'e}ma and Philippe Sornay and Farhang Radja{\"\i}} } @article {128, title = {Bottom-up model of adsorption and transport in multiscale porous media.}, journal = {Phys Rev E Stat Nonlin Soft Matter Phys}, volume = {91}, year = {2015}, month = {Mar-20-2015}, pages = {Article Number: 032133 }, abstract = {

We develop a model of transport in multiscale porous media which accounts for adsorption in the different porosity scales. This model employs statistical mechanics to upscale molecular simulation and describe adsorption and transport at larger time and length scales. Using atom-scale simulations, which capture the changes in adsorption and transport with temperature, pressure, pore size, etc., this approach does not assume any adsorption or flow type. Moreover, by relating the local chemical potential \μ(r) and density \ρ(r), the present model accounts for adsorption effects and possible changes in the confined fluid state upon transport. This model constitutes a bottom-up framework of adsorption and transport in multiscale materials as it (1) describes the adsorption-transport interplay, (2) accounts for the hydrodynamics breakdown at the nm scale, and (3) is multiscale.

}, issn = {1550-2376}, doi = {10.1103/PhysRevE.91.032133}, author = {Botan, Alexandru and Franz-Josef Ulm and Roland Jean-Marc Pellenq and Benoit A. Coasne} } @proceedings {367, title = {A benchmark for particle shape dependence}, journal = {7th International Conference on Micromechanics of Granular Media (Powders and Grains)}, volume = {Book Series: AIP Conference Proceedings POWDERS AND GRAINS 2013}, year = {2013}, month = {Jun-18-2013}, pages = {883-886}, publisher = {AIP}, address = {JUL 08-12 2013 Sydney, AUSTRALIA}, abstract = {

Particle shape is a major parameter for the space-filling and strength properties of granular materials. For a systematic investigation of shape effect, a numerical benchmark test was set up within a collaborative group using different numerical methods and particles of various shape characteristics such as elongation, angularity and nonconvexity. Extensive 2D shear simulations were performed in this framework and the shear strength and packing fraction were compared for different shapes. We show that the results may be analyzed in terms of a low-order shape parameter \η describing the degree of distortion from a perfectly circular shape. In particular, the shear strength is an increasing function of \η with nearly the same trend for all shapes, the differences being of second order compared to \η. We also observe a nontrivial behavior of packing fraction which, for all our simulated shapes, increases with \η from the random close packing fraction for disks, reaches a peak considerably higher than that for disks, and subsequently declines as \η is further increased. Finally, the analysis of contact forces for the same value of \η leads to very similar statistics regardless of our specific particle shapes.

}, doi = {10.1063/1.4812073}, author = {Gael Combe and C{\'e}cile Nouguier-Lehon and Emilien Az{\'e}ma and Krzysztof Szarf and Baptiste Saint-Cyr and Marie Chaze and Farhang Radja{\"\i} and Pascal Villard and Jean-Yves Delenne and Vincent Richefeu and Philippe Sornay and Charles Voivret and CEGEO Group}, editor = {Yu, A and Dong, K and Yang, R} }