@article {657, title = {Bilirubin oxidase-based silica macrocellular robust catalyst for on line dyes degradation}, journal = {Enzyme and Microbial Technology}, volume = {120}, year = {2019}, month = {Jan-01-2019}, pages = {77 - 83}, abstract = {

We present a new heterogeneous biocatalyst based on the grafting of Bilirubin Oxidase from Bacillus pumilus into macrocellular Si(HIPE) materials dedicated to water treatment. Due to the host intrinsic high porosity and monolithic character, on-line catalytic process is reached. We thus used this biocatalyst toward uni-axial flux decolorization of Congo Red and Remazol Brilliant Blue (RBBR) at two different pH (4 and 8.2), both in presence or absence of redox mediator. In absence of redox mediators, 40\% decolorization efficiency was reached within 24 h at pH 4 for Congo Red and 80\% for RBBR at pH 8.2 in 24 h. In presence of 10 mu M ABTS, it respectively attained 100\% efficiency after 2h and 12h. We have also demonstrated that non-toxic species were generated upon dyes decolorization. These results show that unlike laccases, this new biocatalyst exhibits excellent decolorization properties over a wide range of pH. Beyond, this enzymatic-based heterogeneous catalyst can be reused during two months being simply stored at room temperature while maintaining its decolorization efficiency. This study shows that this biocatalyst is a promising and robust candidate toward wastewater treatments, both in acidic and alkaline conditions where in the latter efficient decolorization strategies were still missing.

}, issn = {01410229}, doi = {10.1016/j.enzmictec.2018.10.004}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0141022918303466}, author = {Roucher, Armand and Roussarie, Elodie and Gauvin, R{\'e}gis M. and Rouhana, Jad and Gounel, S{\'e}bastien and Stines-Chaumeil, Claire and Mano, Nicolas and Backov, Renal} } @article {673, title = {Bitumen@SiO2 core-shell particles green synthesis towards flowable powdered bitumen and their binder applications}, journal = {Colloids and Surfaces A: Physicochemical and Engineering Aspects}, volume = {570}, year = {2019}, month = {Mars-20-2019}, pages = {531 - 543}, abstract = {

Mineralization of occulated bitumen emulsions allows producing bitumen powders, also referred to as Bitumen@SiO2 hybrid particles, that can resist storage in hard conditions, with a load up to 8 kPa at 50 \°C during 20 h, without alteration of their morphology or release of their bitumen core. Thanks to the occulation, nal Bitumen@SiO2 powders are not highly pulverulent and allow transportation and handling of bitumen at ambient temperature without the need of water as it is the case for bitumen emulsions. This \“water free\” storage par- ticularity exhibits the double advantage of reducing the cost of transport and of avoiding inhibition of bitumen adhesion at mineral aggregates through the presence of water, therefore rendering the bitumen its high quality of binder. The silica shell is responsible for the high storage stability and, when mixed with aggregates for end use of asphalt, as for example in pavement applications, serves as mineral charge to the bitumen, modifying the bitumen ow properties. Indeed, when heated at 100 \°C and crushed, the capsules break releasing thus the bitumen. This suspension made of bitumen and silica shell fragments exhibits an interesting shear-thinning behavior that can be attributed to the presence of the remnant fragments. Indeed, when shell fragments have been transferred into a silicon oil, initially exhibiting a Newtonian behavior, the mixture of fragments and oil also exhibited a shear thinning rheogram demonstrating the e ect of the silica shell fragments. The bene t of such a behavior modi cation is the possibility to reduce or avoid the usual addition of llers. Passive adhesion has been tested by generating asphalt concretes with Bitumen@SiO2 powders and showed high stability.

}, issn = {09277757}, doi = {10.1016/j.colsurfa.2019.03.048}, url = {https://linkinghub.elsevier.com/retrieve/pii/S0927775719302420}, author = {Anaclet, Pauline and Depardieu, Martin and Laurichesse, Eric and Julien, Viviane and Hung, Yvong and Schmitt, Veronique and Backov, Renal} } @article {659, title = {Bulk Photodriven CO2 Conversion through TiO2@Si(HIPE) Monolithic Macrocellular Foams}, journal = {Advanced Functional Materials}, volume = {3}, year = {2019}, month = {Jan-07-2019}, pages = {1807767}, abstract = {

Operating photo-induced reactions exclusively on catalyst surfaces while not exploiting the full catalyst volume generates a major footprint penalty for the photocatalytic reactor and leads to an inefficient use of the catalytic material. Photonic investigations clearly show that the solid foams have a strongly multidiffusive character, with photons being significantly trapped within the sample cores while addressing a photon mean free path lt = 20.1 \± 1.3 \µm. This 3D process both greatly limits back-reactions and promotes outstanding selectivity toward methane (around 80\%) generation, and even ethane (around 18\%) through C-C coupling reaction, with residual carbon monoxide and dihydrogen contents (around 2\%). Silica\–titania TiO2@Si(HIPE) self-standing macrocellular catalysts lead to optimal efficient thicknesses up to 20 times those of powders, thereby enhancing the way for real 3D-photodriven catalytic processes above the millimeter scale and up to a 6 mm thickness. A rather simple Langmuir\–Hinshelwood based kinetic model is proposed which highlights the strong dependence of photocatalytic reaction rates on light scattering and the crucial role on oxidation back-reactions. In addition, a strong correlation between light attenuation coefficient and photon mean free path and median pore aperture diameter is demonstrated, offering thus a tool for photocatalytic behavior prediction.

}, doi = {10.1002/adfm.201807767}, url = {http://doi.wiley.com/10.1002/adfm.201807767}, author = {Bernadet, Sophie and Tavernier, Eug{\'e}nie and Ta, Duc-Minh and Vall{\'e}e, Renaud A. L. and Ravaine, Serge and F{\'e}cant, Antoine and Backov, Renal} }