@article {607, title = {Scaling behavior of immersed granular flows}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 09044}, abstract = {

The shear behavior of granular materials immersed in a viscous fluid depends on fluid properties (viscosity, density), particle properties (size, density) and boundary conditions (shear rate, confining pressure). Using computational fluid dynamics simulations coupled with molecular dynamics for granular flow, and exploring a broad range of the values of parameters, we show that the parameter space can be reduced to a single parameter that controls the packing fraction and effective friction coefficient. This control parameter is a modified inertial number that incorporates viscous effects.

}, doi = {10.1051/epjconf/201714009044}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714009044}, author = {L. Amarsid and Jean-Yves Delenne and Patrick Mutabaruka and Yann Monerie and Perales, F. and Farhang Radja{\"\i}}, editor = {Saeid Nezamabadi and Luding, S.} } @article {599, title = {Strength of wet agglomerates of spherical particles: effects of friction and size distribution}, journal = {EPJ Web of Conferences}, volume = {140}, year = {2017}, month = {Jun-30-2017}, pages = {Article Number 08021}, abstract = {

We investigate the mechanical behavior of wet granular agglomerates composed of spherical particles by means of molecular dynamics simulations. The capillary cohesion force is modeled as an attraction force at the contact between two particles and expressed as an explicit function of the gap and volume of the liquid bridge. We are interested in the effect of the friction coefficient between primary particles. The agglomerates are subjected to diametrical compression tests. We find that the deformation is ductile involving particle rearrangements. However, a well-defined stress peak is observed and the peak stress is used as a measure of the compressive strength of the agglomerate. The strength increases with friction coefficient but levels off at friction coefficients above 0.4. Furthermore, the compressive strength is an increasing function of particle size span.

}, doi = {10.1051/epjconf/201714008021}, url = {http://www.epj-conferences.org/10.1051/epjconf/201714008021}, author = {Vo, Thanh-Trung and Patrick Mutabaruka and Jean-Yves Delenne and Saeid Nezamabadi and Farhang Radja{\"\i}}, editor = {Luding, S.} } @proceedings {345, title = {Shear flow of dense granular suspensions by computer simulations}, journal = {3rd International Symposium on Geomechanics from Micro to Macro}, volume = {Geomechanics from Micro to Macro}, year = {2014}, month = {Apr-2014}, pages = {467-472}, publisher = {CRC Press}, address = {SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND}, abstract = {

We analyze the shear flow of dense granular materials composed of circular particles immersed in a viscous fluid by means of Molecular Dynamics simulations interfaced with the Lattice Boltzmann Method. A homogeneous flow of the suspension is obtained through periodic boundary conditions and by directly applying a confining pressure on the granular phase and shearing the fluid phase. The stead-state rheology can be described in terms of effective friction coefficient and packing fraction of the suspension as a function of the ratio of viscous shear stress to confining pressure (frictional description), on one hand, and in terms of normal and shear viscosities of the suspension as a function of the packing fraction (viscous description), on the other hand. We show that the simulation data are consistent with both descriptions and in close agreement with the corresponding scaling laws observed in recent experiments.

}, url = {http://prodinra.inra.fr/record/369542}, author = {L. Amarsid and Patrick Mutabaruka and Jean-Yves Delenne}, editor = {Kenichi Soga and Krishna Kumar and Giovanna Biscontin} }