Transient granular flows, such as rock falls, debris flows, and aerial and submarine avalanches, occur very often in nature. In the geotechnical context, transient movements of large granular slopes are a substantial factor of risk due to their destructive force and the transformations the y may produce in the landscape. This paper investigates the ability of MPM, a continuum approach, to reproduce the evolution of a granular slope destabilised by an external energy source. In particular, a central issue is whether the power-law dependence of run-out distance and time observed with respect to the initial geometry or energy can be reproduced by a simple Mohr-Coulomb plastic behaviour. The effect of base friction on the run-out kinematics is studied by comparing the data obtained from the DEM and MPM simulations. The mechanism of energy dissipation is primarily through friction and the MPM is able to predict the run-out response in good agreement with the DEM simulations. At very low excitation energies, the DEM simulations show longer run-out in comparison to the MPM due to local destabilization at the flow front. At low input energies, a larger fraction of the energy is consumed in the destabilisation process, hence the amount energy available for flow is less. However, at higher input energy, where most of the energy is dissipated during the spreading phase, the run-out distance has a weak dependence on the distribution of velocity in the granular mass.

JF - PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON THE MATERIAL POINT METHOD (MPM 2017) Book Series: Procedia Engineering PB - Elsevier Ltd. CY - JAN 10-13, 2017, Delft, NETHERLANDS VL - 175 JO - Procedia Engineering ER - TY - Generic T1 - Evolution of particle size distributions in crushable granular materials T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2015 A1 - Duc-Hanh Nguyen A1 - Emilien Azéma A1 - Farhang Radjaï A1 - Philippe Sornay ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin ED - Kuo, Matthew AB -By means of the contact dynamics method together with a particle fracture model, in which the particles are cohesive aggregates of irreducible polygonal fragments, we investigate the evolution of particle size distribution in the process of uniaxial compaction of granular materials. The case of single particle breakup under compressive stress is used to test the method and the influence of discretization (number of irreducible fragments). We show that the breaking threshold of the granular assembly scales with the internal cohesion of the particles but it depends also on the initial size distribution and irregularity of polygonal particle shapes. The evolution of size distribution proceeds by consecutive periods of intense particle crushing, characterized by local shattering instability, and periods of little breaking activity. Starting with either monodisperse or power-law distribution of particle sizes, the latter evolves towards a broad distribution of the fragmented particles with a nearly power-law distribution in the range of intermediate particle sizes. Interestingly, a finite number of large particles survive despite ongoing crushing process due to the more homogeneous distribution of forces in the presence of small fragmented particles filling the pores between larger particles.

JF - 3rd International Symposium on Geomechanics from Micro to Macro PB - CRC Press CY - SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro SN - 978-1-138-02707-7 ER - TY - JOUR T1 - Transient dynamics of a 2D granular pile JF - The European Physical Journal E Y1 - 2015 A1 - Patrick Mutabaruka A1 - Krishna Kumar A1 - Kenichi Soga A1 - Farhang Radjaï A1 - Jean-Yves Delenne AB -We investigate by means of Contact Dynamics simulations the transient dynamics of a 2D granular pile set into motion by applying shear velocity during a short time interval to all particles. The spreading dynamics is directly controlled by the input energy whereas in recent studies of column collapse the dynamics scales with the initial potential energy of the column. As in column collapse, we observe a power-law dependence of the runout distance with respect to the input energy with nontrivial exponents. This suggests that the power-law behavior is a generic feature of granular dynamics, and the values of the exponents reflect the distribution of kinetic energy inside the material. We observe two regimes with different values of the exponents: the low-energy regime reflects the destabilization of the pile by the impact with a runout time independent of the input energy whereas the high-energy regime is governed by the input energy. We show that the evolution of the pile in the high-energy regime can be described by a characteristic decay time and the available energy after the pile is destabilized.

In this work, we present experimental and numerical results on the interaction between two localized fluidization cavities in an immersed granular packing. According to the gap between the two locally injected upward fluid flows, each fluidized cavity will evolve independently of the another, or conversely, the two cavities can interact with each other: they merge and eventually behave like a single cavity. Combined optical techniques are used for visualization of particle motion inside the granular media (Refractive Index-Matching between liquid and beads and Planar Laser-Induced Fluorescence), the experimental results are compared to a two-dimensional simulation based on coupled Discrete Element and Lattice Boltzmann Methods (DEM-LBM).

JF - 3rd International Symposium on Geomechanics from Micro to Macro PB - CRC Press CY - SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro SN - 978-1-138-02707-7 ER - TY - Generic T1 - Lattice Boltzmann modeling of liquid clusters in granular media T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2014 A1 - Jean-Yves Delenne A1 - Vincent Richefeu A1 - Farhang Radjaï ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin ED - Kuo, Matthew AB -We use capillary condensation simulated by a multiphase Lattice Boltzmann model as a means to generate homogeneous distributions of liquid clusters in 2D granular media. Liquid droplets condense from the vapor phase between and on the grains, and they transform into capillary bonds and liquid clusters as thermodynamic equilibrium is approached. As the amount of condensed liquid is increased, liquid clusters of increasing connectivity are formed and the distribution of liquid undergoes topological transitions until the whole pore space is filled by the liquid. We investigate the cluster statistics and local grain environments. From extensive simulations, we also obtain the mean Laplace pressure as a function of the amount of liquid, which is found to be quite similar to the well-known experimental retention curve in soil mechanics.

JF - 3rd International Symposium on Geomechanics from Micro to Macro PB - CRC Press CY - SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro SN - 978-1-138-02707-7 ER - TY - Generic T1 - Mesoscale simulation of clay aggregate formation and mechanical properties T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2014 A1 - Ebrahimi, Davoud A1 - Roland Jean-Marc Pellenq A1 - Andrew J. Whittle ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin AB -This paper proposes a novel methodology for understanding the meso-scale aggregation of clay platelets in water. We use Molecular Dynamics simulations using the CLAYFF force fields to represent the interactions between two layers of Wyoming montmorillonite (Na-smectite) in bulk water. The analyses are used to establish the potential of mean force at different spacings between the layers for edge-to-edge and face-to-face interactions. This is accomplished by finding the change in free energy as a function of the separation distance between the platelets using thermodynamic perturbation theory with a simple overlap sampling method. These nanoscale results are then used to calibrate the Gay–Berne (GB) potential that represents each platelet as a single-site ellipsoidal body. A coarse-graining upscaling approach then uses the GB potentials and molecular dynamics to represent the meso-scale aggregation of clay platelets (at submicron length scale). Results from meso-scale simulations obtain the equilibrium/jamming configurations for mono-disperse clay platelets. The results show aggregation for a range of clay platelets dimensions and pressures with mean stack size ranging from 3 to 8 platelets. The particle assemblies become more ordered and exhibit more pronounced elastic anisotropy at higher confining pressures. The results are in good agreement with previously measured nano-indentation moduli over a wide range of clay packing densities.

JF - 3rd International Symposium on Geomechanics from Micro to Macro CY - SEP 01-03 2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro: Granular Matter IS - 3 JO - Granular Matter ER - TY - Generic T1 - Modelling soft-particle materials T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2014 A1 - Saeid Nezamabadi A1 - Farhang Radjaï A1 - Julien Averseng ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin AB -Soft-particle materials include colloidal pastes, vesicles, many powders, microgels and suspensions. They share the common feature of being composed of particles that can undergo large deformations without rupture. For the simulation of such materials, we present a modelling approach based on an implicit formulation of the Material Point Method (MPM) interfaced with the Contact Dynamics (CD) method for the treatment of frictional contacts between particles. Each particle is discretized as a collection of material points. The information carried by the material points is projected onto a background mesh, where equations of motion are solved. The mesh solution is then used to update the material points. The implicit formulation of MPM allows for unconditional numerical stability and efficient coupling with implicit treatment of unilateral contacts and friction between the particles by the CD method. We use this model to analyse the compaction process of 2D soft-particle packings. The packing can reach high solid fractions by particle shape change and still flow plastically. The compaction is a nonlinear process in which new contacts are formed between particles and the contact areas increase. We find that the evolution of the packing fraction is a slow logarithmic function of the driving stress as a consequence of increasing contact area. We also evidence the effect of friction, which favours strong stress chains and thus the elongation of particles, leading to a larger packing fraction at a given level of compressive stress as compared to a frictionless particle packing.

JF - 3rd International Symposium on Geomechanics from Micro to Macro PB - CRC Press CY - SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro UR - http://prodinra.inra.fr/record/370208 ER - TY - Generic T1 - Shear flow of dense granular suspensions by computer simulations T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2014 A1 - L. Amarsid A1 - Patrick Mutabaruka A1 - Jean-Yves Delenne ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin AB -We analyze the shear flow of dense granular materials composed of circular particles immersed in a viscous fluid by means of Molecular Dynamics simulations interfaced with the Lattice Boltzmann Method. A homogeneous flow of the suspension is obtained through periodic boundary conditions and by directly applying a confining pressure on the granular phase and shearing the fluid phase. The stead-state rheology can be described in terms of effective friction coefficient and packing fraction of the suspension as a function of the ratio of viscous shear stress to confining pressure (frictional description), on one hand, and in terms of normal and shear viscosities of the suspension as a function of the packing fraction (viscous description), on the other hand. We show that the simulation data are consistent with both descriptions and in close agreement with the corresponding scaling laws observed in recent experiments.

JF - 3rd International Symposium on Geomechanics from Micro to Macro PB - CRC Press CY - SEP 01-03-2014 Univ Cambridge, Cambridge, ENGLAND VL - Geomechanics from Micro to Macro UR - http://prodinra.inra.fr/record/369542 ER - TY - Generic T1 - Granular plastic flow and fabric-based internal variables T2 - 3rd International Symposium on Geomechanics from Micro to Macro Y1 - 2013 A1 - Farhang Radjaï A1 - Stéphane Roux ED - Kenichi Soga ED - Krishna Kumar ED - Giovanna Biscontin ED - Kuo, Matthew AB -A microscopic approach to the quasi-static flow of granular materials requires

fabric parameters pertaining to the contact network. We show that the plastic behavior of

granular materials is correctly predicted with the approximation of perfectly rigid particles

interacting via dissipative contacts as simulated by means of the contact dynamics method.

We investigate the correlations between macroscopic variables (internal friction angle and ...